Transcript
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide
User Manual Specs: • •
3.5” wide by 5.5” tall One color on white paper (black ink)
FRONT COVER
JB-BA-100i JayBird Bluetooth® Adapter for iPod Easy-step Instructions [JayBird Logo] For use with the JB-100 JayBird Bluetooth® Stereo Headset [image or line drawing of headset] [Made-For-iPod logo]
COPY (starting on the inside cover) Introduction: The JayBird Bluetooth® Adapter for MP3 enables any compatible iPod® (see list below) to transmit stereo audio to your JB-100 JayBird Bluetooth® Stereo Headset (up to a 30 foot range).
The JayBird Bluetooth® Adapter for iPod is compatible with the following iPod® models: • • • •
iPod Nano iPod with video (5G) iPod mini iPod (4G, photo)
The JayBird Bluetooth® Adapter for iPod is powered by the iPod once connected to the iPod dock connector, so no batteries are required. .
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide
Pairing the adapter with your JayBird Bluetooth® Stereo Headset 1. Plug the adapter into the iPod® Dock Connector. The LED should be facing UP (same side as the front of the iPod®) 2. Turn the iPod® on and start playing music. The LED on the adapter will be steady blue color while it is in search mode. 3. Make sure that your headset is turned off. 4. Put the headset into pairing mode by pressing the POWER/TALK button on the headset until the LED on the right earpiece blink alternating red and blue colors. 5. The adapter LED will flash blue once it start to pair with the headset. 6. Once the headset finds and pairs with the adapter, both the adapter and headset LEDs will blink blue (the headset will blink blue every six seconds and the adapter LED will blink blue every 2 seconds). Your headset and adapter are now paired. Listening to Music 1. Once paired, all you need to do is plug in the adapter to the iPod® dock connector, turn on your headset, and play music. You will hear the music through your headset. 2. Adjust the volume by using the UP/DOWN buttons on the headset. Adjusting the volume on the iPod® will have no effect. 3. When not using the adapter, it’s a good idea to remove it from the iPod® dock connector as it is drawing power from the iPod® and will reduce the iPod® battery play time.
Using the phone call feature of your JayBird Bluetooth® Stereo Headset 1. The JayBird Bluetooth® Stereo Headset can also be paired with any compatible Bluetooth® enabled mobile phone. For pairing instructions, refer to the user manual that came with your headset. 2. Once paired with a mobile phone, you can make and receive phone calls even while listening to music from your iPod® wirelessly using your JayBird Bluetooth® Adapter. When a call comes in, you will hear the phone ring. Answer the call by pressing the TALK button on the headset (or by pressing the answer button on your phone) and the music will turn off automatically and you can then take the call. When you done with the call and have hung up, the headset will switch back to music play. (Refer to your JayBird Bluetooth® Stereo Headset user manual for detailed instructions on making and receiving phone calls)
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide TECHNICAL SPECIFICATIONS Protocol
Bluetooth 1.2, A2DP
Frequency Band
2.4 GHz
Tx Power
Bluetooth Class 2
Range
10 meters/33 feet
Audio Format
16-bit Stereo
Music Playing Time
Draws power from iPod
Battery
No battery - draws power from iPod
Charging
No charging required - draws power from iPod
Weight:(Grams)
6.5g
Operating Temp
14 F to 113 F (-10° C to 45° C) (subject to change)
Storage Temp
-4 F to 131 F (-20° C to 55° C) (subject to change)
AC power supply
Not required - draws power from iPod
No of Paired Device
1
Pairing passkey
Not required - automatically pairs with headset
Features
Power and audio line out from iPod. status LED
Agency Approvals
FCC, CE
Included In Box
JayBird Bluetooth Adapter for iPod User Manual
Compatibility
- iPod Nano - iPod with video (5G) - iPod mini - iPod (4G, photo)
Federal Communication Commission This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
IMPORTANT INFORMATION REQUIRED BY THE FCC THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
