Transcript
JBL LS Series ®
LS40 – 3-Way, 6-1/2" (165mm) bookshelf loudspeaker
A new standard The LS Series establishes a new standard for high-end JBL horn-loaded speaker systems. Attention to detail, from exceptional acoustical engineering to high-quality craftsmanship, is a hallmark of the LS Series, which continues the JBL tradition of audio excellence. Each passive LS Series loudspeaker features a compression driver mounted in a patented Bi-Radial horn, which provides rich, full sound and a defined soundstage. And the Series elegantly proportioned, beautifully crafted cabinets feature high-gloss-ebony wood panels, making them a welcome addition to any décor. ®
®
Highlights
Key Specifications
3-Way, 6-1/2" bookshelf speaker with horn-loaded UHF and HF
The compression driver is mounted in a patented JBL Bi-Radial horn for rich, full sound and a defined soundstage
Features 176Nd compression driver mounted in a patented JBL Bi-Radial horn
High-quality cabinet
Rich, detailed sound with precise sound imaging High-quality cabinet with beautifully polished high-glossebony wood panels Dual gold-plated binding-post speaker terminals, bi-wirable
Beautifully polished high-gloss-ebony wood panels Ultrahigh-frequency transducer: Horn-loaded 3/4" Polyester-film ring-radiator with frequency response past 40kHz High-frequency transducer: 2" Pure-titanium compression driver with diamond surround, powerful neodymium-iron-boron magnet and lightweight aluminum voice coil mounted in a Bi-Radial horn Low-frequency transducer: 6-1/2" Pulp cone with powerful neodymium-iron-boron magnet and cast-aluminum frame Dual gold-plated binding-post speaker terminals, bi-wirable
JBL LS Series ®
LS40 – 3-Way, 6-1/2" (165mm) bookshelf loudspeaker
Specifications Frequency Response (–10dB): 42Hz – 40kHz Frequency Response (–3dB): 50Hz – 38kHz Power Handling (Continuous): 75W Power Handling (Music): 150W Power Handling (Peak): 300W Max. Rec. Amplifier Power*: 150W Sensitivity (2.83V/1m): 87dB Crossover Frequencies: 2.6kHz; 7kHz; 24dB/octave Nominal Impedance: 6 Ohms Low-Frequency Transducer: 6-1/2" (165mm), shielded; cast-aluminum frames High-Frequency Transducer: 2" (50mm) Pure-titanium compression driver Ultrahigh-Frequency Transducer: 3/4" (19mm) Polyester-film ring-radiator, shielded; neodymium magnet Dimensions (H x W x D): 19-3/16" x 8-3/4" x 13-1/2" (487mm x 222mm x 343mm) Dimensions With Feet and Pad (H x W x D): 19-11/16" x 8-3/4" x 13-1/2" (500mm x 222mm x 343mm) Weight per Speaker (Net Weight): 29.8 lb (13.5kg)
* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved. JBL and Bi-Radial are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
JBL LS Series ®
LS Center – 3-Way, dual 6-1/2" (165mm) center speaker
A new standard The LS Series establishes a new standard for high-end JBL horn-loaded speaker systems. Attention to detail, from exceptional acoustical engineering to high-quality craftsmanship, is a hallmark of the LS Series, which continues the JBL tradition of audio excellence. Each passive LS Series loudspeaker features a compression driver mounted in a patented Bi-Radial horn, which provides rich, full sound and a defined soundstage. And the Series elegantly proportioned, beautifully crafted cabinets feature high-gloss-ebony wood panels, making them a welcome addition to any décor. ®
®
Highlights
Key Specifications
3-Way dual 6-1/2" (165mm) center channel speaker with horn-loaded UHF and HF
The compression driver is mounted in a patented JBL Bi-Radial horn for rich, full sound and a defined soundstage
Features 176Nd compression driver mounted in a patented JBL Bi-Radial horn
Beautifully polished high-gloss-ebony wood panels
Rich, detailed sound with precise sound imaging High-quality cabinet with beautifully polished high-glossebony wood panels Metal spikes and coasters are supplied Dual gold-plated binding-post speaker terminals, bi-wirable
High-quality cabinet Ultrahigh-frequency transducer: Horn-loaded 3/4" polyester-film ring radiator with frequency response past 40kHz High-frequency transducer: 2" Pure-titanium compression driver with diamond surround, powerful neodymium-iron-boron magnet and lightweight aluminum voice coil mounted in a Bi-Radial horn Low-frequency transducer: Dual 6-1/2" pulp cone with powerful neodymiumiron-boron magnet and cast-aluminum frame Metal spikes and coasters are supplied Dual gold-plated binding-post speaker terminals, bi-wirable
JBL LS Series ®
LS Center – 3-Way, dual 6-1/2" (165mm) center speaker
Specifications Frequency Response (–10dB): 50Hz – 40kHz Frequency Response (–3dB): 85Hz – 38kHz Power Handling (Continuous): 75W Power Handling (Music): 150W Power Handling (Peak): 300W Max. Rec. Amplifier Power*: 150W Sensitivity (2.83V/1m): 88dB Crossover Frequencies: 2.5kHz, 9kHz; 24dB/octave Nominal Impedance: 6 Ohms Low-Frequency Transducers: Dual 6-1/2" (165mm), shielded; cast-aluminum frames High-Frequency Transducer: 2" (50mm) Pure-titanium compression driver Ultrahigh-Frequency Transducer: 3/4" (19mm) Polyester-film ring radiator, shielded; neodymium magnet Dimensions (H x W x D): 8-1/2" x 26-1/2" x 9-1/4" (217mm x 672mm x 235mm) Dimensions With Feet and Pad (H x W x D): 9" x 26-1/2" x 9-1/4" (230mm x 672mm x 235mm) Weight per Speaker (Net Weight): 31.7 lb (14.4kg)
* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved. JBL and Bi-Radial are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
JBL LS Series ®
LS60 – 3-1/2-Way, 6-1/2" (165mm) floorstanding loudspeaker
A new standard The LS Series establishes a new standard for high-end JBL horn-loaded speaker systems. Attention to detail, from exceptional acoustical engineering to high-quality craftsmanship, is a hallmark of the LS Series, which continues the JBL tradition of audio excellence. Each passive LS Series loudspeaker features a compression driver mounted in a patented Bi-Radial horn, which provides rich, full sound and a defined soundstage. And the Series elegantly proportioned, beautifully crafted cabinets feature high-gloss-ebony wood panels, making them a welcome addition to any décor. ®
®
Highlights
Key Specifications
3-1/2-Way dual 6-1/2" (165mm) floorstanding speaker with horn-loaded UHF and HF
The compression driver is mounted in a patented JBL Bi-Radial horn for rich, full sound and a defined soundstage
Features 176Nd compression driver mounted in a patented JBL Bi-Radial horn
Beautifully polished high-gloss-ebony wood panels
Rich, detailed sound with precise sound imaging High-quality cabinet with beautifully polished high-glossebony wood panels Metal spikes and coasters are supplied Dual gold-plated binding-post speaker terminals, bi-wirable
High-quality cabinet Ultrahigh-frequency transducer: Horn-loaded 3/4" polyester-film ring radiator with frequency response past 40kHz High-frequency transducer: 2" Pure-titanium compression driver with diamond surround, powerful neodymium-iron-boron magnet and lightweight aluminum voice coil mounted in a Bi-Radial horn Low-frequency transducer: Dual 6-1/2" pulp cone with powerful neodymiumiron-boron magnet and cast-aluminum frame Staggered-crossover-network design, which allows top woofer to cross over to HF compression driver for smoother transition of directivity and balanced sound across the listening area Metal spikes and coasters are supplied Dual gold-plated binding-post speaker terminals, bi-wirable
JBL LS Series ®
LS60 – 3-1/2-Way, 6-1/2" (165mm) floorstanding loudspeaker
Specifications Frequency Response (–10dB): 40Hz – 40kHz Frequency Response (–3dB): 48Hz – 38kHz Power Handling (Continuous): 75W Power Handling (Music): 150W Power Handling (Peak): 300W Max. Rec. Amplifier Power*: 150W Sensitivity (2.83V/1m): 87dB Crossover Frequencies: 400Hz, 6dB/octave**; 2kHz; 8kHz; 24dB/octave Nominal Impedance: 6 Ohms Low-Frequency Transducers: Dual 6-1/2" (165mm), shielded; cast-aluminum frames High-Frequency Transducer: 2" (50mm) Pure-titanium compression driver Ultrahigh-Frequency Transducer: 3/4" (19mm) Polyester-film ring radiator, shielded; neodymium magnet Dimensions (H x W x D): 39-1/2" x 8-3/4" x 13-1/2" (1004mm x 222mm x 343mm) Dimensions With Feet and Pad (H x W x D): 40" x 8-3/4" x 13-1/2" (1017mm x 222mm x 343mm) Weight per Speaker (Net Weight): 58.6 lb (26.6kg)
* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels. ** High-pass crossover for one of the two low-frequency transducers only.
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved. JBL and Bi-Radial are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
JBL LS Series ®
LS80 – 3-1/2-Way, dual 8" (200mm) floorstanding loudspeaker
A new standard The LS Series establishes a new standard for high-end JBL horn-loaded speaker systems. Attention to detail, from exceptional acoustical engineering to high-quality craftsmanship, is a hallmark of the LS Series, which continues the JBL tradition of audio excellence. Each passive LS Series loudspeaker features a compression driver mounted in a patented Bi-Radial horn, which provides rich, full sound and a defined soundstage. And the Series elegantly proportioned, beautifully crafted cabinets feature high-gloss-ebony wood panels, making them a welcome addition to any décor. ®
®
Highlights
Key Specifications
3-1/2-Way dual 8" (200mm) floorstanding speaker with horn-loaded UHF and HF
The compression driver is mounted in a patented JBL Bi-Radial horn for rich, full sound and a defined soundstage
Features 176Nd compression driver mounted in a patented JBL Bi-Radial horn
Beautifully polished high-gloss-ebony wood panels
Rich, detailed sound with precise sound imaging High-quality cabinet with beautifully polished high-glossebony wood panels Metal spikes and coasters are supplied Dual gold-plated binding-post speaker terminals, bi-wirable
High-quality cabinet Ultrahigh-frequency transducer: Horn-loaded 3/4" polyester-film ring radiator with frequency response past 40kHz High-frequency transducer: 2" Pure-titanium compression driver with diamond surround, powerful neodymium-iron-boron magnet and lightweight aluminum voice coil mounted in a Bi-Radial horn Low-frequency transducer: Dual 8" pulp cone with powerful neodymium-ironboron magnet and cast-aluminum frame Staggered-crossover network design, which allows top woofer to cross over to HF compression driver for smoother transition of directivity, and balanced sound across the listening area Metal spikes and coasters are supplied Dual gold-plated binding-post speaker terminals, bi-wirable
JBL LS Series ®
LS80 – 3-1/2-Way, dual 8" (200mm) floorstanding loudspeaker
Specifications Frequency Response (–10dB): 35Hz – 40kHz Frequency Response (–3dB): 46Hz – 38kHz Power Handling (Continuous): 100W Power Handling (Music): 200W Power Handling (Peak): 400W Max. Rec. Amplifier Power*: 200W Sensitivity (2.83V/1m): 90dB Crossover Frequencies: 400Hz; 6dB/octave**; 2.5kHz; 8kHz; 24dB/octave Nominal Impedance: 6 Ohms Low-Frequency Transducers: Dual 8" (200mm), shielded; cast-aluminum frames High-Frequency Transducer: 2" (50mm) Pure-titanium compression driver Ultrahigh-Frequency Transducer: 3/4" (19mm) Polyester-film ring radiator, shielded; neodymium magnet Dimensions (H x W x D): 43-1/2" x 10-3/16" x 16-1/2" (1104mm x 259mm x 418mm) Dimensions With Feet and Pad (H x W x D): 44" x 10-3/16" x 16-1/2" (1117mm x 259mm x 418mm) Weight per Speaker (net weight): 78.5 lb (35.6kg)
* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels. ** High-pass crossover for one of the two low-frequency transducers only.
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved. JBL and Bi-Radial are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
JBL LS Series ®
LS120P – 400 Watts 12" (300mm) powered subwoofer
A new standard The LS Series establishes a new standard for high-end JBL horn-loaded speaker systems. Attention to detail, from exceptional acoustical engineering to high-quality craftsmanship, is a hallmark of the LS Series, which continues the JBL tradition of audio excellence. Each passive LS Series loudspeaker features a compression driver mounted in a patented Bi-Radial horn, which provides rich, full sound and a defined soundstage. And the Series elegantly proportioned, beautifully crafted cabinets feature high-gloss-ebony wood panels, making them a welcome addition to any décor. ®
®
Highlights Powerful, front-firing powered subwoofer 300mm (12") low-frequency transducer 400-Watts-RMS high-output, high-efficiency amplifier High-quality cabinet with beautifully polished high-glossebony wood panels Metal Spikes and coasters are supplied
Key Specifications 300mm (12") low-frequency transducer 400-Watts-RMS high-output, high-efficiency amplifier for thunderous deep-bass extension without breakup or distortion, even at high listening levels High-quality cabinet Beautifully polished high-gloss-ebony wood panels Switchable LFE input Adjustable low-pass crossover Phase switch allows subwoofer to operate with normal or reverse polarity Subwoofer-level control to conveniently adjust the relative volume level of low frequencies Tuned-port bass enclosure extends low-frequency response and increases overall efficiency of the bass driver, reducing distortion and improving its power-handling capacity Metal spikes and coasters are supplied
JBL LS Series ®
LS120P – 400 Watts 12" (300mm) powered subwoofer
Specifications Frequency Response: 25Hz – 150Hz Amplifier RMS Power: 400 Watts Amplifier Peak Dynamic Power*: 700 Watts Crossover Frequencies: 50Hz – 150Hz; 24dB/octave, continuously adjustable Driver: 300mm (12") Dimensions (H x W x D): 487mm x 375mm x 425mm (19-3/16" x 14-3/4" x 16-3/4") Dimensions, With Feet, Controls, Grille, etc. (H x W x D): 500mm x 375mm x 438mm (19-11/16" x 14-3/4" x 17-1/4") Weight: 25.8kg (57 lb)
* The peak dynamic power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved. JBL is a trademark of Harman International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
