Preview only show first 10 pages with watermark. For full document please download

Jdsu J6825a Inverse Multiplexing For Atm

   EMBED


Share

Transcript

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS JDSU J6825A Inverse Multiplexing for ATM Technology to quickly solve problems in today’s complex mobile networks Inverse Multiplexing for ATM Does your UMTS include IMA (Inverse Multiplexing for ATM) technology to transport ATM traffic over a bundle of T1 or E1 cables? IMA fits well in environments where gradual increase in line capacity is needed, and implementing a high-capacity solution (e.g. optical fiber) is not feasible. Accurately testing the combined ATM traffic transported over a bundle of E1 or T1 lines can be challenging for traditional network testing equipment. Looking at individual E1/T1 links, or multiple individual links simultaneously is meaningless without the higher-level IMA technology view. Signaling Analyzer and IMA The most powerful mobile network analysis software in the industry, Signaling Analyzer sets the standard for intelligent analysis. The JDSU J6825A IMA product works in conjunction with Signaling Analyzer to analyze networks incorporating IMA technology. The J6825A allows Signaling Analyzer software to acquire IMA measurements and present this information in the Signaling Analyzer environment. The software can analyze data from one IMA group at a time. While the primary purpose of the J6825A product is to allow Signaling Analyzer to take measurements on networks using IMA technology, the product also enables some lower-level IMA statistics. WEBSITE: www.jdsu.com JDSU J6825A Inverse Multiplexing for ATM COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Network elements under test n x T1s or n x E1s } JDSU DNA with eight-port J6824A LIM Network elements under test Signaling Analyzer application Simplify analysis of ATM traffic using IMA technology over multiple E1/T1 links. Use the J6825A with Signaling Analyzer software and JDSU Distributed Network Analyzer hardware to analyze one IMA group at a time. Real-time (full rate) AAL 2 and AAL 5 reassembly is performed simultaneously on aggregated IMA traffic. Ordering Information J6825A IMA J6825A license key enables Signaling Analyzer to work on networks using IMA. One J6825A license key is required for each PC (PC, J6801A/B, J6802A/B or J6803A/B) that will connect to and control the eight-port J6824A E1/T1 LIMs. For Multi-UserServer systems, one J6825A license enables up to 30 clients on the same Multi-User System. Remove all doubt Our repair and calibration services will get your equipment back to you, performing like new, when promised. You will get full value out of your JDSU equipment throughout its lifetime. Your equipment will be serviced by JDSU-trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. You will always have the utmost confidence in your measurements. JDSU offers a wide range of additional expert test and measurement services for your equipment, including initial start-up assistance onsite education and training, as well as design, system integration, and project management. North America Tel: 1 866 228 3762 Fax: +1 301 353 9216 Latin America Tel: +1 954 688 5660 Fax: +1 954 345 4668 Asia Pacific Tel: +852 2892 0990 Fax: +852 2892 0770 EMEA Tel: +49 7121 86 2222 Fax: +49 7172 86 1222 WEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2010 JDS Uniphase Corporation J6825AIMA 30168082 500 0710