Jh 21c07 Mdk 21 Inch Marine Desktop Color Monitor

Transcript

21” CRT JH 21C07 MDK 21 inch Marine Desktop Color Monitor Jakob Hatteland Display AS Created : 13 Jul, 2001 Modified : 13 Nov, 2001 Created by: Stein Eikesdal Title : IND100050-1 Subject : JH21C07MDK-UserManual Description: Internet release for customers. Rev.1 Jakob Hatteland Display AS Åmsosen, N-5578 Nedre Vats, Norway Phone: +47 5276 3700, Fax: +47 5276 5444 www.hatteland.com CONTENTS Product: JH 21C07MDK Features: The color monitor described here is an industrialized version of a high quality Hitachi based monitor. The monitor allows you to display professional applications with clarity and enhanced color and image quality. The monitor provides you with automatic compatibility with multiple upgrading platforms and a vast array of graphics standards allowing resolution upgrades without upgrading the monitor. The monitor is tested according to the maritime standard IEC945-3. This is a technically lighter desktop monitor of the Hatteland monitor type JH 21C06 version. JH 21C07 MDK - 21 inch Marine Desktop Color Monitor CONTENTS: OPERATION........................................................................................................... Power switch, Power Light Indicator, Degauss..................................................... 3 3 USER CONTROLS PANEL.................................................................................... User Controls, Input Select, Power LED Indicator................................................4 Select Functions / Adjust buttons......................................................................... 4 OSD MENU USAGE............................................................................................... Language Select, Brightness & Contrast, Horizontal Pos., Horizontal Size......... Vertical Pos., Vertical Size, Rotation, Pincushion, Trapezoid, Right Pincushion...5 Right Trapezoid, Color Select, Color Balance...................................................... 5 5 USAGE / STORE.................................................................................................... Horizontal Moire, Vertical Moire, Store................................................................. 6 6 PHYSICAL CONNECTIONS.................................................................................. VGA Signal, Power Terminal................................................................................ 7 7 PIN ASSIGNMENTS............................................................................................... VGA 15P D-SUB (Input1, Input2)......................................................................... 8 8 SIGNAL CHECKING.............................................................................................. Signal Check, Automatic Signal Check............................................................... Video Muting....................................................................................................... 9 9 10 PRESETS / POWER SAVING................................................................................ Preset Signal Timing Table, Power Saving, Plug & Play...................................... NOTES.................................................................................................................... SPECIFICATIONS.................................................................................................. 11 11 12 13 2 4 5 Product: JH 21C07MDK OPERATION Product: JH 21C07MDK Power Light Indicator Power Switch Degauss Button POWER SWITCH: Power ON: To turn the monitor on, press the power switch. The power light indicator (Power LED) will turn green. Note: If no VGA signal sync is present, it will turn orange after 10 seconds and the message “NO SYNC. SIGNAL” will be shown in the display. Power OFF: To turn the monitor off, press the power switch. DEGAUSS - To manually degauss the picture press this button. This function will remove any color impuritites that may be visible in the picture. Note: - The monitor degausses itself during intital power up. Wait at least 10 minutes before repeating this function. 3 Product: JH 21C07MDK USER CONTROLS PANEL Product: JH 21C07MDK Select Function Buttons Input Select Adjust Buttons USER CONTROLS: The On Screen Manager (OSD EasyMenu) controls are located on the left side of the monitor. To begin adjusting any of the monitor’s functions, press then desired function item, and then refer to the table below to make any changes to the picture. Below follows a rough guide to what these user controls buttons stand for. INPUT SELECT: This CRT monitor have two input terminals in the back. This will let the user to connect two computers simultaneously. The user may select any of the inputs to display by pressing the “Input Select” button. SELECT FUNCTIONS BUTTONS / ADJUST BUTTONS: Any picture adjustments can be viewed or modified by pressing any of these buttons. This will bring up an EasyMenu showing it’s function. Every function can be adjusted using the “Adjust Buttons” to either increase or decrease the values. The EasyMenu will be visible for 6 seconds before it automatically disappears. Pressing the same button will also close the EasyMenu. When any of the “Adjust Buttons” are pressed, a purple color will indicate that the selected function is active and are now beeing modified. A slider will also indicate the adjustment. 4 Product: JH 21C07MDK OSD MENU USAGE Product: JH 21C07MDK AVAILABLE FUNCTIONS: Each of the “function buttons” have two sets of parameters that can be modified. One upper parameter and one lower parameter. To modify any of the parameters use either of the “adjust buttons” sets. The EasyMenu display will also indicate what parameter is beeing modfied. Some of the parameters requires the user to press two “functions buttons” simultaneous. This will be shown in the table below. Upper Parameter are adjusted with these buttons: Lower Parameter are adjusted with these buttons: PARAMETER FUNCTION BUTTON ADJUST BUTTON RESULT or Choose between these languages: ENGLISH, DEUTSCH, ESPANOL, ITALIANO and FRANCAIS. Will affect all of the menus and messages. Contrast or Makes Contrast darker/brighter excluding background. Brightness or Makes Brightness darker/brighter including background. H.Position or Moves the position of the picture left or right H.Size or Shrinks or expands the picture horizontally. Language Select and V.Position or Moves the position of the picture down or up. V.Size or Shrinks or expands the picture vertically. Rotation or Rotates the picture counter clockwise or clockwise. Pincushion or Curves the left and right sides inwards or outwards. Trapezoid or Shrinks or expands the top and bottom side. Right Pincushion or Curves the right side inwards or outwards. Right Trapezoid or Shrinks or expands the right top side+right bottom side. Color Select or Choose the color warmth (Kelvin Degree) of the picture. Available modes are: No 1:9300K, No 2:6500K, No 3:5000K and No 4:USER (if available) Color Balance Red and or Decrease or increase the intensity of the red color. Green and or Decrease or increase the intensity of the green color. Blue and or Decrease of increase the intensity of the blue color. Color reset This function is only valid when the user already has entered the color balance parameter menu. (As described above) and Pressing these two buttons simultaneously will cancel the currently adjusted color mode, and recalls the previously selected color mode, before entering the color balance parameter menu. NOTE: - When EasyMenu is not shown, the user can start the adjustment of Contrast and Brightness only, without pressing any of the “Select Function Buttons” - It is recommended to follow the following procedures for the adjustment of distortions; (1) “Rotation” - (2) “Pincushion” and “Trapezoid” (Adjust the right side) - (3) “Right Pincushion” and “Right Trapezoid” (Adjust the right side) - The mode “No 4:USER” is not factory preset, it can be programmed by the user - if desired. After adjustment of “Color Balance” (Red, Green or Blue) and “STORE” (refer to page 5), the user’s color balance preset can be restored by selecting “No 4:USER” continues.... 5 Product: JH 21C07MDK USAGE / STORE Product: JH 21C07MDK AVAILABLE FUNCTIONS: (continued) PARAMETER FUNCTION BUTTON H. Moire Reduction and V. Moire Reduction and ADJUST BUTTON RESULT or Stops or operates the horizontal moire changing circuit. or Increases or decreases the strength of the horizontal moire changing circuit. or Stops or operates the vertical moire changing circuit. or Increases or decreases the strength of the vertical moire changing circuit. NOTE: - Moire may appear on the screen due to interference between CRT dot pitch and video signal by conditions of video image, display size, display brightness etc. Adjust the conditions of display size, display brightness etc, before trying the adjustment of moire. - In some cases, this function may cause deterioration of display quality, such as focus, jitter etc. - The condition of the moire changing circuit will be indicated by pressing any of the “Select Function Buttons” or “Adjust Buttons”, and will be displayed in the lower left corner of the EasyMenu as its own icon. See below. Moire changing circuit condition: Indicated Symbol not indicated Horizontal Vertical ON ON ON OFF OFF ON OFF OFF STORE: The user can store the display settings. Only one setting is allowed for each video mode. These geometry settings will be saved automatically when the EasyMenu is exited: H.POSITION, H.SIZE, V.POSITION, V.SIZE, PINCUSHION, TRAPEZOID, RIGHT PINCUSHION, RIGHT TRAPEZOID, H.MOIRE REDUCTION, and V.MOIRE REDUCTION. 6 Product: JH 21C07MDK PHYSICAL CONNECTIONS Product:JH21C07MDK Rear side of monitor Signal Inputs: Input 1 Input 2 Power Terminal SIGNAL INPUTS: There are two signal inputs connectors allowing you to display two signals from separate sources. Connect the VGA cable to the desired D-SUB 15P Connector (female) on the rear side of the monitor. If possible, screw the VGA cable to the D-SUB connector and make sure you don’t bend any of the pins inside the connector. Connect the other end of the cable to the VGA output of your computer, and fasten it there also. POWER TERMINAL: Make sure the monitor is turned off before connecting. Insert the powercable into the 220 VDC power terminal. 7 Product: JH 21C07MDK PIN ASSIGNMENTS Product: JH 21C07MDK VGA D-SUB 15P CONNECTORS FEMALE: 5 10 4 9 3 8 15 14 13 2 7 1 6 12 11 Pin Number: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description (Input 1): red video green video (sync. optional) blue video no pin no connection red ground green ground blue ground no connection ground no connection bi-directional data (SDA) horizontal sync. (or H/V) vertical sync. (VCLK) data clock (SCL) 8 Description (Input 2): red video green video (sync. optional) blue video no pin no connection red ground green ground blue ground no connection ground no connection no connection horizontal sync. (or H/V) vertical sync. no connection Product: JH 21C07MDK SIGNAL CHECKING Product: JH 21C07MDK SIGNAL CHECK: To refer to the input signal condition, press any of the adjust buttons. The horizontal and vertical frequency will be indicated in the lower part of the picture. Above: Sample of “Input Select” EasyMenu. AUTOMATIC SIGNAL CHECK: When the CRT monitor has detected the change of the signal input condition, it will indicate the condition automatically, as follows: Indication 1: The EasyMenu indicates the resolution and vertical frequency. Precision frequency +/- 2khz approx. Condition 1: The monitor detects proper signal. Solution 1: No action is needed. Above: Sample of EasyMenu. Indication 2: The monitor indicates the message “POWER SAVE” for 5 seconds. Condition 2: The monitor detects no sync. signal Solution 2: Verify power switch of the computer and check cable connection. Above: Sample of POWER SAVE condition. continues.... 9 Product: JH 21C07MDK SIGNAL CHECKING Product: JH 21C07MDK Indication 3: The Power Light Indicator flashes. Condition 3: This happens when the monitor will go into the power saving mode. (Refer to page 6) Solution 3: Verify power switch of the computer and check cable connection. Indication 4: The EasyMenu indicates the message “INVALID SCAN FREQ”. Condition 4: This will happen when the monitor detects a sync. signal which is out of set-up specification or is unstable. Solution 4: Verify the specification of input signal. Above: Sample of INVALID SCAN FREQ condition. VIDEO MUTING: When the monitor has detected the change of the input signal condition, the monitor mutes the picture automatically. This function hides scrambled images which may appear during the changing period of the input signal. The muting period may vary as it can take a while before the replaced input signal has become stable or not. 10 Product: JH 21C07MDK PRESETS / POWER SAVING Product: JH 21C07MDK PRESET SIGNAL TIMING TABLE: Microprocessor-based preset functions can store 26 sets of geometry settings including the standard settings. The following industrial standard settings have been pre-programmed by the factory. Preset Resolution 01: 02: 03: 04: 05: 06: 640 x 400 800 x 600 1024 x 768 1280 x 1024 1600 x 1200 1856 x 1392 Note: Vert. Frequency(Hz) Horiz. Frequency(Hz) 70 85 85 85 90 72 31.47 53.67 68.68 91.15 112.50 102.95 Video Mode VGA VESA VESA VESA VESA - Input signals with approximately the same frequencies may be regarded as the same signal. - Standard settings are subject to change without notice. POWER SAVING SYSTEM: This monitor complies with VESA and ENERGY STAR© power saving requirements. The power saving system works only when used with VESA DPMS compliant PC’s and/or graphic controllers. VESA DPMS MODE H.Sync. V.Sync. Active Yes Yes 130 W (typical) Stand-by Blanked No Yes less than 15W Flashing quickly Suspend Blanked Yes No less than 15W Flashing quickly OFF Blanked No No less than 5W Flashing slowly ON Note: VIDEO Power Saving States Power Power LED Lighting Green - When the user switch the power OFF during the monitor is in OFF mode, sometimes the LED flashes continues a few seconds afterwards. This is not an failure. PLUG & PLAY: This monitor complies with VESA DDC1/2B specifications. Plug & Play is a system with computer, peripherals (including monitors) and operating systems. It works when the monitor is connected to DDC ready computer, which is running an operating system software that incorporates Plug & Play functionality. 11 Product: JH 21C07MDK NOTES Product: JH 21C07MDK 12 Product: JH 21C07MDK SPECIFICATIONS CRT characteristics: CRT size : Viewable image size : Horizontal mask pitch : Deflection : Product: JH 21C07MDK Presets: 27 (21 user-programmable, 6 factory settings) 21” / 533 mm 20” / 508 mm 406 x 305 mm 90 deg. Power Supply: Universal Power Supply: AC 100 - 120 V, 50/60 Hz or AC 220 - 240 V, 50/60 Hz Tube: Flat square, black matrix, Advanced Elliptical Aperture electron gun with Multistep Dynamic Focussing (A-EA-MDF) Power Consumption: 130 W (typical), 145W max Input Signal: Video: Analogue 0.7V p-p 75 ohm Environmental Considerations: Sync: H/V separate TTL, H/V composite TTL, sync. on Operating: Temperature -15 deg. C to +55 deg. C green, automatic sync. mode detection Humidity 30% to 93% (non condensing) Display Colors Analog Input: Unlimited colors (Depending on the graphics board) Light Intensity: All white screen All black screen Storage: Weight: 28.5 kg : > 85 cd/m2 : < 0,01 cd/m2 Synchronization Range: Horizontal : 31 kHz to 115 kHz (Automatically) Vertical : 50 Hz to 160 Hz (Automatically) Resolutions: Maximum Recommended : 1800 x 1350 @ 75 Hz : 1280 x 1024 @ 85 Hz Video Clock Frequency: 230 MHz Temperature -20 deg. C to +60 deg. C Humidity 10% to 90% (non condensing) Input Signal Terminals: 2 x mini D-SUB 15P connector (female) User Controls: Power switch On Screen Manager Controls: Degauss switch (manual / auto) Brightness control Contrast control Adjustment controls Input Select Specification and design are subject to change without notice. For additional information, datasheets and support for this product, please visit our website: http://www.hatteland.com Jakob Hatteland Display AS Åmsosen, N-5578 Nedre Vats, Norway Phone : +47 5276 3700 Fax : +47 5276 5444 E-mail : [email protected] 13 Product: JH 21C07MDK