Transcript
JM08 User Guide of JW08Watch (Safety Guard 2) Please carefully read the Guide before using for correct installation and quick use. Due to different monitor settings the color may slightly differ..
I. Preparation before Use Check if the device model is correct and all accessories are included. WCDMA 3g SIM， 3g Select a 3G SIM card available for WCDMA, for example if in Australia Telstra or Optus 3G card. For details on the SIM and coverage, please refer to the distributor’s advice. (Power off the watch before inserting the car) SIM GPRS。 GPRS and caller ID functions are required for SIM card of the watch. The APP is required to be installed on the mobile phone. For more information about the App please see section 5. Use the QR barcode or two-dimension code to download the app. II. Product Functions GPS+wifi+ base station, triple positioning modes gprs Mobile client or computer GPRS service platform, dual control modes GPRS GPRS real-time positioning, tracking, monitoring Camera Contacts Curriculum schedule Early childhood education Encyclopedia Q&A Friendshake Talkback Health Weather Games: Math Freak, Link Game Footprint Watch alarm clock Safe area SOS SOS emergency alarm Low power alarm Remote power off
III. Watch Introduction
usb Boot button
USB charge interface
SOS
sim
One Touch SOS
SIM card slot
Hang up
Return key
IV. Several Screen Displays and Explanation First-level menus:
Answer key
Several second-level menus:
4.1 Lock screen: Day of the week, date and user (missed calls not shown in this figure) 4.2 Main interface: The first line from left: notification message (not shown in the figure), small icon to show mute mode (not shown in the figure), GSM signal, power, time (12-hour system). The second line shows the time (24-hour system). The third line shows the day of the week and the date. The fourth line shows the health awards. 4.3 Photo: Click to see photos taken by the watch. Photos may be deleted. 4.4 Camera: Click to take photos. The camera can take photos in portrait and landscape mode. 4.5 Settings: WLAN and Internet, device, system (date and time, about the mobile phone, other related items, power off and reboot). 4.6 Files management: Used to check the files on the watch. It’s recommended not to delete the file. 4.7 Contacts: Click to see the fifteen numbers set on the APP, select the number and click to dial. 4.8 Curriculum schedule: Click to see courses from Monday to Friday on the APP. Click the course title to see the course duration. Change the curriculum schedule on the APP. 4.9 Early childhood education: Divided into four categories, i.e. recognizing figures, recognizing fruit, recognizing animals and recognizing vehicles. The introduction to this feature can be in Chinese or English. 4.10 Encyclopedia Q&A: In this interface, press the recording icon and ask what to search, then press the icon again to stop recording and the watch will find the answer and read it out. Adult supervision is required as the content searched is uncontrollable and for reference only. 4.11 Friendshake: Click to enter the interface, shake the watch to look for and add friends. The
picture will be highlighted when friends have been added successfully. The watch may add up to four friends. Click the picture to chat with friends and send voice messages and pictures to them. Long press the message/messages from friends to “delete” it and “delete all”. Long press the “picture of the friend” to remove a friend. 4.12 Voice Chat: Click to chat on the APP. Voice and pictures may be sent to the mobile phone. Note: messages can’t be sent from the watch to the APP in the mobile phone but can be sent from the app in the mobile phone to the watch. 4.13 Steps counting: Steps counting function is off by default and needs to be turned on in the APP. After opening, the watch will automatically count steps. Click the interface to see the number of steps taken. Slide the interface to see the distance, calories and number of steps. 4.14 Weather: Click to see weather conditions of the current city. 4.15 Math Freak: Click to enter the interface and click “Start” to start the game which is classified into three grades in order of difficulty, i.e. “easy, moderately difficult and difficult”. Click the settings button to set it up. 4.16. Link Game: Click to enter the interface and click “Start” to start the game.
V. Client (Safety Guard 2) Operation Manual 5.1 APP registration Before login, it’s required to register an account manually. To register, scan or manually input the 15-bit registration code which is unique and can’t be used more than once. Where it has been used, it’s required to ask the agent to restore the corresponding ID number or registration code; the account for login is 4-16 letters and numbers and must be unique. It can’t be the same as other
users, or the user will be required to change the account and register a new one; other information can be input by the user voluntarily and the password can be changed. The registration code is required to retrieve the password. It’s required to fill in a phone number for login and registration. The interface for registration is shown as follows:
5.2 Main interface function introduction 5.2.1 APP function menu interface Upon completion of registration, enter a correct account and password in the login fields and click login to enter the main interface which is shown as follows:
Explanation of several functions: (1) Voice Chat: Have a voice messaging conversation between the watch and APP App sends voice: after the recording function is started, the APP begins recording and sends the voice to the watch. The recording can be up to 15 seconds. Upon receiving the voice message, the voice interface in the watch will pop up a tip. Click it to play the voice. Watch recording: touch the screen and enter the Voice Chat interface, long press “record” button to start voice recording, release the button and send the recoding to the APP when finished; after adding friends, click Friendshake and enter the recording interface, long press to record, release the button and send the recording to friends. APP sends pictures: in the voice dialogue interface, switch the enter key to send messages and pictures, click the right “+” icon to choose pictures and click to send them. Watch sends pictures: touch the screen and enter the Voice Chat interface, click the left “+” icon to take photos and send them to APP. (2) Childs information: Set the child’s basic information, hobbies and interests and so on. (3) Settings: set each parameter of the watch.
①Set SOS phone number: three phone numbers can be set. In case of an emergency, press the SOS key for three seconds on the watch to give an alarm and the watch will dial the three phone numbers in succession. It will dial each number twice if no one is answering. ②Voice monitoring: This is generally set to a parent or guardians phone number. After monitoring is started, the watch will automatically dial the set phone number. The watch can’t hear the mobile phone, but the mobile phone can monitor the watch. ③Mode: Four modes, i.e. vibrating and ringing, ringing, vibrating and mute. ④Message alert setting: Low power, SOS, remove the switch of the three message alarms. Alarm messages will be sent by the watch to the three phone numbers and normal SMS charges will apply. After setting, the phone numbers will also be stored in the voice monitoring by default. ⑤Remote photography: Enter the interface and click “remote photographing” button to control the watch for remote photography, renew the interface every 30 seconds. Click on the photo to enlarge it. The photo can be rotated 90 degrees and the time when it’s taken can also be checked. ⑥Contacts: 15 contact numbers can be set by the APP to contact with the watch for two-way communications. ⑦Watch alarm: Three alarm clocks can be set according to personal needs. ⑧Look for the watch: if the watch is lost, send this instruction and the watch will ring for one minute to facilitate searching. Press the button to stop ringing. ⑩ Curriculum schedule: Set courses and duration from Monday to Friday. Click the corresponding box in the App interface to edit and save. ⑾Remote power off: After booting for regular operation, the watch can only be powered off by a remote APP instead of pressing the key. ⑿Restore the default operation mode: Default operation mode: GPS opened for 24 hours a day with an uploading interval of 10 minutes. (4) Positioning: real-time display of the watch’s position. The map interface may display the position of both the watch and the APP-installed mobile phone. Click “positioning” to begin real-time positioning of the watch for 3 minutes with an uploading interval of 10 seconds. After three minutes it will restore to default operation mode. The real-time positioning mode of the watch can be viewed in the map interface. The red icon is for GPS positioning, the blue for base station positioning and the green for wifi positioning which is also known as Web positioning. (5) Historical location: The historical location of the watch can be checked according to the time period. The base station switch in the interface is used to display the position of the base station when the history is checked. Turn on the switch to display the location of the base station. When the switch is turned off, no location of the base station will be displayed. (6) Functions list: click the water-drop icon at the upper left corner.
①Safe area: The safe area fence has a minimum radius of 500 meters. Only when the user walks out of the fence from its inner side and when the GPS is opened for positioning will an alarm e given. Only one safe area fence can be set. ②Mode of attendance: The watch will reject all calls during these three time frames. ③Friendshake: After friends are added, the watch will display their ID numbers. Each watch can only have four friends. ④Health: Set time frames for steps counting and sleeping and check the history of the week. ⑤Heart awards: select a number of hearts on the APP, click OK to send them to the watch. The watch will display the hearts and their number on the screen. ⑥Information center: Click to check the alarm information records of the watch. (7) “Personal setting”: water-drop icon at the upper right corner.
Note: User’s ID number can be checked in the device list. If user’s ID does not match the ID on the watch, the watch can’t connect to the APP. Detailed explanation of all functions is in the “Help” section for users. (8) Switch: If several watches are managed by one account, click the icon for free switch and
control. Switch into current settings for control. (9) Device: click the icon and the map interface will be refreshed to show the current position of the watch. Three icons under the position are designated for mobile phones. 5.3 Explanation for watch alarm The watch can give different kinds of alarms, and after it has sounded an alarm the mobile phone will receive a notification. Click the alarm notification to enter the APP interface and then enter the information center to check the specific alarm notification.
VI. Explanation of Operations of the Watch The watch has three basic operation modes. Normal mode, power saving mode and real-time positioning mode, with different uploading intervals for different operation mode. Normal mode: uploading interval of 600 seconds; Power saving mode: uploading interval of 3,600 seconds; Tracking mode: uploading interval of 60 seconds;
VII. Watch Operation Manual 7.1 Watch SOS emergency alarm Long press the SOS key for three seconds. The watch displays SOS on its screen, enters into an alarm mode and dials three SOS phone numbers in succession two times or until the phone call is answered. The watch may send messages to the monitoring phone number (closed by default) and send alarm notification to the APP. 7.2 Friendshake A little force is required to swing the watch to add friends in the interface. By uploading data the watch request the server for binding. The server will decide if it should bind two watches as friends according to time and distance. Friends can be added successfully if all conditions are met. 7.3 Voice Chat Enter the Voice Chat interface of the watch to chat with the APP. Click friends to chat with them. 7.4 Photographing Enter the camera of the watch to take photos and record daily life. 7.5 Study Enter the Early childhood education and Encyclopedia Q&A interface of the watch to study. The watch will help children learn and study inependantly.. 7.6 Games Enter games of the watch and children will be able to entertain themselves simply and enrich their spare time. 7.7 Answer and hang up the call The watch may communicate with relevant phone numbers set by the APP, ensuring the communications between children and relatives. 7.8 Power off Enter settings-system-power off and reboot, click “power off” or “reboot” APP remote power off Power off
8. Trouble clearing If the watch fails to connect to the server after being booted for the first time and the APP sends an instruction that the device fails to connect to the Internet, please check:
1) Whether the SIM card in the watch is available for WCDMA network; the device only supports Unicom 3G card. 2) Whether the SIM card in the watch is accessing mobile data traffic. Internet data must be available and it can only use 3G data traffic. 3) Server parameters refer to IP and the port. Whether the ID is correct. It must ensure that the ID barcode pasted on the watch is consistent with the one written into the watch when it left the factory. Customers may text pw,123456,ts# by the mobile phone and send it to the watch (the watch must have a sim card and be booted up; messages must be texted in English). 4) Failures to register are divided into two kinds: a) if it’s indicated that the device number doesn’t exist or is already registered, an agent is required to be visited and deal with the problem; b. if it’s indicated that the account is registered that is to say the account already exists, customers may change the account for re-registration.
9. Two-dimensional code scanning entrance Scan the two-dimensional code to download Android and IOS mobile client to select “safety guard” or “safety guard 2”
