Transcript
396-001490 John Deere DB Planter PumpRight Mounting Bracket
Kit Number: 515-200800
396-001490 - John Deere DB Planter PumpRight Bracket Kit
Page 1 © 2014 SureFire Ag Systems, Inc.
Revised: 1/21/2015
Parts List ITEM NO. 1 2 3 4 5 6
PART NUMBER 400-2800Y1 400-2117Y2 380-1017 380-1022 300-080104-5 323-08
396-001490 - John Deere DB Planter PumpRight Bracket Kit
DESCRIPTION DB Pumpright Offset Bracket DB PumpRight bracket, mounts to rear of CCS tank 1/2" x 6" x 5" Square Bend U-Bolt 1/2" x 3" x 4-1/2" Square Bend U-Bolt 1/2" x 1-1/4" Bolt G5 1/2" Flange Nut
Page 2 © 2014 SureFire Ag Systems, Inc.
QTY. 1 1 2 1 8 8
Revised: 1/21/2015
Kit Description SureFire PumpRight Pumps can be mounted off the rear of the CCS Tank Support Structure on DB Planters. Each 515-200800 Bracket Kit will mount one PumpRight. The Bracket Kit can be used on both the left and right sides to mount two PumpRights on one planter as shown below.
Right CCS Tank Left CCS Tank
Forward PumpRight D250 Air Compressor Platform (The DB Planter has the option of one or two Compressors)
PumpRight D115 KZ Section Valves (Optional)
396-001490 - John Deere DB Planter PumpRight Bracket Kit
Banjo Section Valves (Optional)
Page 3 © 2014 SureFire Ag Systems, Inc.
Revised: 1/21/2015
Step by Step Instructions for mounting Bracket Kit to Planter 1. Mount the 400-2800Y1 Offset Bracket to the 4”x6” Horizontal Implement Bar using the provided 1/2”x6”x5” Square Bend U-bolts (380-1017). Placement of the Bracket should be centered on the 3”x3” Vertical Leg Support of the Implement. Do not fully tighten the ubolts to allow for adjustment in step 2. 2. Mount the bottom arm portion of the bracket with the provided 1/2”x3”x41/2” Square Bend U-bolt (380-1022) to the 3”x3” Vertical Leg support of the Implement. Once in place, tighten all u-bolts.
4”x6” Horiz Bar Step 1 3”x3” Vertical Leg Support Step 2
3. Mount the 400-2117Y2 DB PumpRight Bracket to the Offset Bracket (400-2800Y1) using the provided 1/2”X1-1/4” Bolts (300080104-5). There are additional mounting holes in the Offset Bracket for mounting the DB Bracket at different heights depending on the height of the PumpRight Model being used. More than likely, the DB Bracket will need to be installed at the lowest location on the Offset Bracket for head clearance of the PumpRight due to the Air Compressor Platform being overhead.
Additional Mounting Holes (TYP)
Step 3 (4 Bolts)
396-001490 - John Deere DB Planter PumpRight Bracket Kit
Page 4 © 2014 SureFire Ag Systems, Inc.
Revised: 1/21/2015
PumpRight Installation The 400-2117Y2 DB PumpRight Bracket can be used to mount the PumpRight D70, D115, D160 or D250. Instructions: 1. Set the pump on the bracket. Typically the liquid plumbing components are pointed to the rear for easiest installation and maintenance. 2. Attach the PumpRight with the four provided 1/2”x1-1/4” bolts (300-080104-5). Multiple slots are included in the bracket and the PumpRight bases to allow flexibility in mounting.
PumpRight D250
PumpRight D115 396-001490 - John Deere DB Planter PumpRight Bracket Kit
Page 5 © 2014 SureFire Ag Systems, Inc.
Revised: 1/21/2015
Optional Section Valve Installation Banjo and KZ Section Valves can also be mounted to the 400-2117Y2 DB PumpRight Bracket on either side. Instructions: 1. For Banjo Section Valves, use the respective round bend u-bolts provided with the particular valve kit ordered. A total of 5 valves can be mounted to the left side of the bracket and 3 valves on the right side. 2. For KZ Section Valves, use the respective bolts and hardware provided with the particular valve kit ordered. A total of 9 valves can be mounted to the left side of the bracket and 7 valves on the right side.
Mounting Holes for Banjo Valves using Round Bent U-bolts
Banjo Section Valve Example
KZ Section Valve Example 396-001490 - John Deere DB Planter PumpRight Bracket Kit
Page 6 © 2014 SureFire Ag Systems, Inc.
Mounting Holes for KZ Valves using Bolts Revised: 1/21/2015
