Transcript
JS750DF
30" Min. 30" Recommended 30" Min. 6" Min. Min. Recommended From Walls 9-1/16" Recommended 6" Min. 30" 6" Walls Min. From 9-1/16" NOTE: Use a 4' powercord Min. From Walls 9-1/16" to prevent interference with Recommended 30" NOTE: a 4' drawer. powercord the Use storage Power 6" Min. a 4'topowercord toNOTE: prevent interference with cordsUse 4-1/2' 6' long may From 9-1/16" 30" Walls to prevent with the storage drawer. Power have to interference be dressed to allow 23-3/16" Min. 30" If the control panel thefor storage drawer. cords 4-1/2' to 6' longPower may proper drawer closing. Min. measures 31-1/8" a 4' powercord cordsto4-1/2' to 6' long mayNOTE: Use have be dressed to allow 1-1/4" Min. Flat 15" Min. 23-3/16" If the(79.1 control cm)panel like in the to prevent 23-3/16" interference with have to bedrawer dressed to allow for proper closing. 30" If the control panel measures 31-1/8" illustration AND if the for proper drawer closing. the storage drawer. Power 15" Min. 1-1/4" Min. Flat Min. measures 31-1/8" (79.1 cm) like inhas thea countertop cords 4-1/2' to 6' long may 1-1/4" Min. Flat 15" Min.illustration (79.1 cm) AND like inifshave the the raised edge, have to be dressed to allow 23-3/16" illustration AND if the countertop has a raised edge to clear If the control panel for proper drawer closing. 25" measures 31-1/8" countertop has a raised edge, shave theMin. control panel, 15" Min. (79.1 cm) like in the 1-1/4" Flatshave raised edge, raised edge to clear as shown at left. 2-1/2" 25" 35-7/8"-36-1/2" from illustration AND if the raised edge to clear the control panel, 25" Min. from Floor to countertop 1-1/4" countertop has a theshown control as at panel, left. 2-1/2" 35-7/8"-36-1/2" from countertop to as topshown at left. raised edge, shave 2-1/2" 35-7/8"-36-1/2" from Floor to countertop 1-1/4" Min. from of cabinet drawer 4" raised edge to clear 25" Floor to countertop 1-1/4" Min.tofrom countertop top the control panel, to top ofcountertop cabinet drawer 4" 7-1/2" as shown at left. 2-1/2" 35-7/8"-36-1/2" of cabinet drawer 4" from Floor to countertop 1-1/4" Min. from 7-1/2" countertop to top 7-1/2" 2-1/2" of cabinet drawer 4" 29-15/16"-30-1/16" 2-1/2" 7-1/2" 2-1/2" 29-15/16"-30-1/16" 29-15/16"-30-1/16" Acceptable electrical outlet area 2-1/2" Acceptable electrical 29-15/16"-30-1/16" Acceptable outlet area electrical outlet area If you are NOT using the Acceptable electrical Filler strip or Backguard: outlet area If you are NOT using the Accessory If youstrip areor NOT using the Filler Backguard: Backguard JXS32 Filler strip or Backguard: Accessory Accessory Backguard JXS32 If you are NOT using the Backguard JXS32 30" 4" 23-3/16" Filler strip or Backguard: 24" 31-1/4" Accessory 30" 4" 23-3/16" 2-7/8" 24" Backguard JXS32 30" 31-1/4" 4" 23-3/16" To Front 24" 31-1/4" 2-7/8" Surface of To2-7/8" Front Countertop 30" 30" 23-3/16" To Front Surface of 24" 31-1/4" Surface of Countertop 30" 2-7/8" Countertop 30" To Front Surface of Countertop 30" 36-1/4" If you are using the 20-5/8" Door 36-1/4" Filler strip or Backguard: Clearance 36-1/4" If you are using the 20-5/8" Door From Front If youstrip areor using the Filler Backguard: KW RATING 20-5/8" Doorof Clearance Surface Filler strip or Backguard: Clearance From Front Countertop 36-1/4" 240V 12.6 From Front Surface of 20-5/8" Door 25" If you are using the Surface of Countertop Filler strip or Backguard: Clearance Countertop 208V 9.5 25" From Front 25" Surface of BREAKER SIZE Countertop 30" 240V 40 Amps† 25" 25-3/4"* 30" † (excluding handle) 208V 40 Amps 30" 25-3/4"* 25-3/4"* (excluding handle) *Total depth from wall to † (excludingfront handle) of closed oven door 30" *Total depth from wallisto28-1/2" including handle *Total to 25-3/4"* front of depth closedfrom ovenwall door (excluding handle) front of closed door including handleoven is 28-1/2" including handle is 28-1/2" If the countertop area is not flat, excess tension may be applied to the glass cooktop, causing *Total depth from wall breakage and voiding the warranty. Make sure the wall covering, countertop, and front of closed oven do All GE ranges are equippedflooring with If thecabinets countertop areathe is not flat,can excess tension applied the glass cooktop, Listed by around range withstand themay heatbe (up to 200°F) generated by the causing range. including handle is 28 anto Anti-Tip device. The installation If the countertop areathe is not flat, excess tension applied to the glass cooktop,and causing breakage and voiding warranty. Make suresurface themay wallbe covering, countertop, flooring A. Allow 30" minimum clearance between units andof bottom unprotected wood or Underwriters this device of is an important, breakage and voiding the can warranty. Makethe sure the wall countertop, flooring and cabinets the withstand heat (up to covering, 200°F) generated by the range. metalaround cabinet, orrange allow a 24" minimum when bottom of wood or metal cabinet is protected by no required step in the installation Laboratories cabinets around the range can withstand the heatcovered (up to 200°F) generated A. Allow 30" minimum clearance between surface units and bottom of unprotected wood less than 1/4"-thick flame-retardant millboard with less than by No.the 28 range. MSG or sheet ofno the range. If the countertop area is.025" not excess tension may applied to no the glass cooktop, causing A. Allow 30" minimum clearance between surface units and bottom unprotected wood or metal cabinet, or thick), allow a.015"-thick 24" minimum when bottom of flat, wood or metal cabinet is be protected by metal (.015" stainless steel, aluminum orof.020" copper. breakage and voiding the warranty. Make sure the wall covering, countertop, flooring and metal cabinet, or allow a 24" when bottom ofwith wood or metal cabinet is protected by no than 1/4"-thick flame-retardant millboard covered less than No. 28above MSG sheet B. This appliance has beenminimum approved for 0" spacing to no adjacent surfaces the cooktop. For answers to your Monogram, GE Café™ Series, GE Profile™ Series or less cabinets around the.025" range can withstand the heat (upMSG toand 200°F) generated by the range. lessHowever, than 1/4"-thick flame-retardant millboard covered with no above less than No. 28 sheet metal (.015" thick), .015"-thick stainless steel, or .020" a minimum 6" spacing to surfaces lessaluminum than 15" thecopper. cooktop adjacent Allow 30" clearance between surface units bottom of unprotected wood or GE Appliances product questions, visit our website at geappliances.com B.metal (.015" thick), stainless steel, .025" or .020" copper. This appliance has.015"-thick beenA.approved forminimum 0" spacing toaluminum adjacent surfaces above theand cooktop. cabinetry. metal cabinet, or allow agrease 24" minimum when bottom ofthe wood or metal cabinet is protected by no B. This appliance has approved forto 0"steam, spacing to15" adjacent above cooktop. However, a minimum 6"been spacing to surfaces less than above the cooktop and adjacent is recommended to reduce exposure splattersurfaces and heat. Allow 1/4" minimum or call GE Answer Center® Service, 800.626.2000. Revised less than flame-retardant millboard covered with no lessSpecification than No. 28 MSG sheet 1/16 However, a minimum 6" spacing to 1/4"-thick surfaces less than 15" above the cooktop and adjacent cabinetry. clearance at the back wall. metal (.015" thick), .015"-thick stainless steel, .025" aluminum or .020" copper. iscabinetry. recommended reduce exposure steam, grease splatter and heat. Allow 1/4" minimum To reduce thetorisk of burns or fire to when reaching over hot surface elements, cabinet storage This appliance hasgrease been approved forspace 0" spacing to adjacent surfaces is recommended to reduce toavoided. steam, splatter and heat. Allow 1/4" minimum clearance the back wall. B.exposure space at above the cooktop should be If cabinet storage is to be provided above above the cooktop. However, a minimum 6" spacing tohood surfaces than above the cooktop and adjacent clearance at the back wall. To reduce the riskthe of risk burns orbe firereduced when reaching over surface elements, cabinet storage the cooktop, can by installing ahot range that less projects at15" least 5" beyond cabinetry. To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space the cooktop should be avoided. If cabinet storage space is to be provided above theabove front of the cabinets. isreduced recommended to Ifreduce exposure to steam, splatter and heat. Allow 1/4" minimum space abovethe therisk cooktop be by avoided. cabinet storage space is togrease be above the cooktop, can beshould installing a range hood that projects at provided least 5" beyond
GE Appliances 30" Slide-In Electric Convection Range DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) RECEPTACLE LOCATIONS: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall. NOTE: This appliance has been approved for 0" spacing to adjacent surfaces above the cooktop. However, a 6" minimum spacing to surfaces less than 15" above the cooktop and adjacent cabinet is recommended to reduce exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION: Before installing, consult installation instructions for current dimensional data and additional requirements REAR FILLER STRIP (INCLUDED) WB07T10680 - Black Filler Strip Assembly
OPTIONAL KITS FOR SLIDE-IN ELECTRIC RANGES (Available At Additional Cost) ACCESSORY BACKGUARDS (Attaches to the back of range as a backguard when unit is installed in 30" free-standing cutout) JXS32SS (Stainless) - 4" High JXS32BB (Black) - 4" High BODY SIDES (Slide-in ranges are sold without sides installed. Can be installed on either left or right when unit has one exposed side [no cabinet adjacent]. Kit contains 1 body side) JXS77BB (Black)
NOTE: Check local codes for required breaker size.
JS750DF
GE Appliances 30" Slide-In Electric Convection Range FEATURES AND BENEFITS True European Convection with Precise Air - Enjoy perfectly even results without turning the pan 6"/9"/12" 3600W Power Boil - Pots and pans fit perfectly on the flexible heating element Bridge zone - Cook griddle favorites from the convenience of your range Fifth element warming zone - Provides low heat capability for foods Self-clean with Steam Clean option - Clean your oven the way you want Fast preheat - Make hot meals in a hurry with less time preheating Hidden bake - Make cleanup easy by eliminating hard-to-reach areas Black gloss oven interior - Enjoy a clean and sleek appearance Model JS750DFWW - White on white Model JS750DFBB - Black on black
JS750DF
Specification Revised 1/16
