Jvc Gd-f65l1 Lcd User Guides

Transcript

ENGLISH DEUTSCH FRANÇAIS LCD DISPLAY MONITOR BEDIENUNGSANLEITUNG: MANUEL D’INSTRUCTIONS: GD-F65L1 Downloaded From TV-Manual.com Manuals LCD-DISPLAYMONITOR MONITEUR LCD INSTRUCTIONS ENGLISH Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany DEUTSCH Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich elektromagnetischer Verträglichkeit und elektrischer Sicherheit überein. Die europäische Vertretung für die Victor Company of Japan, Limited ist: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Deutschland Cher(e) client(e), FRANÇAIS Cet appareil est conforme aux directives et normes européennes en vigueur concernant la compatibilité électromagnétique et à la sécurité électrique. Représentant européen de la société Victor Company of Japan, Limited : JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Allemagne Уважаемый клиент. Данное устройство соответствует действительным Европейским директивам и стандартам по электромагнитной совместимости и электрической безопасности. Представительство компании Victor Company of Japan, Limited в Европе: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Германия ҆⠅ⱘ乒ᅶ ᴀ㺙㕂ヺড়⃻⌆᳝ᬜⱘ݇Ѣ⬉⺕‫ݐ‬ᆍᗻ੠⫼⬉ᅝܼⱘ㾘ᅮ੠ᷛ‫ޚ‬DŽ Victor Company of Japan, Limited ⱘ⃻⌆ҷ㸼໘ᰃ JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg ᖋ೑ Downloaded From TV-Manual.com Manuals Ё᭛ ENGLISH GD-F65L1 LCD DISPLAY MONITOR ENGLISH IMPORTANT INFORMATION FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. • The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician. “WARNING: THIS APPARATUS MUST BE EARTHED.” WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. Downloaded From TV-Manual.com Manuals 1 E IMPORTANT INFORMATION (Continued) CAUTION: Use the supplied power cord as it is. This product utilises fluorescent tubes containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities. Information for Users on Disposal of Old Equipment [European Union] These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of-life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with your national legislation and the Directive 2002/96/EC and 2006/66/EC. Products By disposing of these products correctly, you will help to conserve natural resources and will help to prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of these products. For more information about collection points and recycling of these products, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Battery Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead. 2 Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. [Business users] If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain information about the take-back of the product. [Other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to dispose of these items, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment and batteries. E Downloaded From TV-Manual.com Manuals DEAR JVC CUSTOMER ENGLISH Thank you for your purchase of a JVC LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions — All operating instructions must be read and understood before the product is operated. 2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future reference. 3. Observe warnings — All warnings on the product and in the instructions must be observed closely. 4. Follow instructions — All operating instructions must be followed. 5. Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. 6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result in accidents. 7. Water and moisture — Do not use the product near water. 8. Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings. Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. 9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. 10. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. 12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product. 13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing. 14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e. When the product has been dropped or damaged. f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. Downloaded From TV-Manual.com Manuals 3 E SAFETY PRECAUTIONS (Continued) 15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorised parts can result in fire, electric shock and/or other danger. 16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. 18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers). 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • Use the specified batteries only. • Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment. • Do not mix old and new batteries. • Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary. • Replace an exhausted battery with a new one promptly. • If you will not use the remote control for a long time, remove the batteries. • If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye. 20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. WARNING: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate counter measures. 4 E Downloaded From TV-Manual.com Manuals TIPS AND SAFETY INSTRUCTIONS - Do not display a still picture for a long period, as this could cause a residual image. The Power Cord - Do not damage the power cord nor place heavy objects on it, stretch it or over bend it. Also, do not add extension cords. Damage to the cord may result in fire or electric shock. - Use only the power cord supplied with the monitor. - Insert the power plug directly into the AC outlet. Adding an extension cord may lead to fire as a result of overheating. - Never rub or tap the monitor with hard objects. - Do not remove or insert the power plug with wet hands. Doing so could result in electric shock. - Please understand that JVC bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognised under law. - Do not attempt to repair the power cord if it is broken or malfunctioning. Refer the servicing to the service representative. - This monitor and its accessories may be upgraded without advance notice. - Do not use the monitor where there is a lot of dust, where humidity is high, or where the monitor may come into contact with oil or steam, as this could lead to fire. - Ensure that the monitor does not come into contact with water or other fluids. Ensure that no objects such as paper clips or pins enter the monitor as this could lead to fire or electric shock. - Do not place the monitor on top of unstable objects or in unsafe places. Do not allow the monitor to receive strong shocks or to strongly vibrate. Causing the monitor to fall or topple over may damage it. - Do not use the monitor near heating equipment or in places where there is likelihood of high temperature, as this may lead to generation of excessive heat and outbreak of fire. Downloaded From TV-Manual.com Manuals ENGLISH - The TFT colour LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colours or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor. - Unplug the power cord if it is not used for a long time. Manual Scope - This product comes with RICOH Bitmap Fonts produced and sold by RICOH COMPANY, LTD. - All other brand and product names are trademarks or registered trademarks of their respective holders. - Language of OSD menu used in this manual is English by way of example. - Illustrations in this manual may not exactly represent the actual product or display. Fluorescent Tubes ● The fluorescent tubes in this product have a limited lifetime. ● Because of the property of fluorescent tubes, the screen may flash during the initial period of use. If this happens, please turn off the main power switch of the monitor and turn on again to confirm operation. 5 E Contents Introduction IMPORTANT INFORMATION............................................1 DEAR JVC CUSTOMER ...................................................3 SAFETY PRECAUTIONS..................................................3 TIPS AND SAFETY INSTRUCTIONS ...............................5 Supplied Accessories......................................................7 Part Names .......................................................................7 Front view.....................................................................7 Rear view .....................................................................8 Remote control unit ......................................................8 Connection and Installation How to Install the Monitor ...............................................9 Mounting precautions ...................................................9 Connecting Peripheral Equipment ...............................10 Connection with a PC.................................................10 Connection with AV equipment ..................................10 Other terminals........................................................... 11 Connecting external speakers.................................... 11 Connecting multiple monitors ..................................... 11 Connecting the Power Cord .........................................12 Preparing the Remote Control Unit ..............................12 Installing the batteries ................................................12 Remote control operation range.................................12 Removing the Temporary Stand ...................................13 6 E Downloaded From TV-Manual.com Manuals Basic Operation Turning Power On/Off ....................................................14 Turning on the main power ........................................14 Turning power on/off ..................................................14 Disabling power on/off operations ..............................14 Basic Operation .............................................................15 Menu Items .....................................................................17 Displaying the menu screen .......................................17 Menu item details .......................................................18 Adjustments for PC screen display ............................23 Initialisation (Reset)/ Functional Restriction Setting ..................................24 PC Operation Controlling the Monitor with a PC ................................25 PC connection ............................................................25 Communication conditions .........................................25 Communication procedure .........................................25 RS-232C command table ...........................................29 Troubleshooting and Specifications Troubleshooting .............................................................33 Specifications ................................................................34 Supplied Accessories If any component should be missing, please contact your dealer. ENGLISH � Liquid Crystal Display: 1 � Remote control unit: 1 � Power cord: 1 � AA/R6 battery: 2 � INSTRUCTIONS: 1 � Stand hole protection cover: 2 * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. Part Names Front view 1 1. LCD panel 2. Remote control sensor (See page 12.) 3. Power LED (See page 14.) 4. Power switch (See page 14.) 5. Input switch (See page 15.) 6. Temporary Stand (See page 13.) 6 TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor. 2 3 4 5 Downloaded From TV-Manual.com Manuals 7 E Part Names Rear view 16 1. 2. 3. 4. 5. 17 15 13 1 4 2 3 7 6 5 8 9 10 11 12 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. External speaker terminals (See page 11.) PC/AV audio output terminals (See page 11.) AV audio input terminals (See page 10.) PC/AV output terminal (DVI-D) (See page 11.) PC1 input terminal (DVI-D) (See page 10.) AV1 input terminal (DVI-D) (See page 10.) PC2 input terminal (Mini D-sub 15 pin) (See page 10.) PC audio input terminal (See page 10.) PC3 input terminals (BNC) (See page 10.) AV3 input terminal (BNC) (See page 10.) AV2 input terminals (BNC) (See page 10.) RS-232C output terminal (D-sub 9 pin) (See page 25.) RS-232C input terminal (D-sub 9 pin) (See page 25.) Main power switch (See page 14.) AC input terminal (See page 12.) Handles Vents Hooks 14 Remote control unit 1 2 7 3 8 4 5 6 8 E Downloaded From TV-Manual.com Manuals 9 1. 2. 3. 4. 5. 6. 7. 8. 9. Signal transmitter POWER button (See page 14.) MUTE button (See page 15.) VOL +/- buttons (See page 15.) BRIGHT +/- buttons (See page 15.) Cursor control ( / / / ) buttons DISPLAY button (See page 15.) MODE button (See page 15.) INPUT button (See page 15.) MENU button (See page 17.) SIZE button (See page 15.) How to Install the Monitor ENGLISH Mounting precautions • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Consult your dealer about the recommended wall mounting unit for the monitor. • When moving the monitor, be sure to hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury. • Install the monitor with the surface perpendicular to a level surface. If necessary, limit the tilt between 0 and 20 degrees downward. • Mounting the monitor on the wall requires special expertise and the work must be performed by a qualified technician. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. • This monitor should be used at an ambient temperature between 0°C and 40°C. Provide enough space around the monitor to prevent heat from accumulating inside. Unit: cm 30 5 3.5 5 5 • • • • • • If it is difficult to provide such space because the monitor is installed inside a housing or for other reasons, take other measures to keep the ambient temperature between 0°C and 40°C such as installing a fan in the housing. Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. After mounting, it is recommended to take some measures to prevent the monitor from falling down. Secure the monitor by fastening the hooks at the top of the monitor to a wall or a pillar with strong cord and brackets (not included). Do not place the monitor on a device which generates heat. This monitor is fixed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use only until the monitor is properly mounted. Be sure to use a stand or a wall-mount bracket designed or designated for mounting the monitor. This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure. Downloaded From TV-Manual.com Manuals 9 E Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause malfunctions and the other problems. Connection with a PC PC audio input terminal PC3 input terminals V H R G B • Use a commercially available signal cable (DVI-D 24 pin) for the PC1 input terminal. Set DVI SELECT on the OPTION menu to PC (DIGITAL) when using the PC1 input terminal. (See page 19.) • Use a commercially available signal cable (Mini D-sub 15 pin) for the PC2 input terminal. • Use a commercially available signal cable (BNC) for the PC3 input terminals. Set BNC SELECT on the OPTION menu to PC (ANALOG) when using the PC3 input terminals. (See page 19.) • Use a commercially available audio cable (mini stereo jack) for the PC audio input terminal. Use an audio cable without resistance. TIPS • Images may not be displayed properly depending on the computer (graphics board) to be connected. • A screen with 1920 x 1080 resolution may not be displayed correctly on PC3 (BNC). In this case, check the settings of your computer (graphics board) to verify that input signals conform to specifications of this monitor (Hsync: 66.3 kHz, Vsync: 60 Hz, and Dot frequency: 148.5 MHz). (See page 35.) • If there is a check box to disable EDID in display control panel, check it when using PC3 (BNC). • Use the automatic screen adjustment when a PC screen is displayed for the first time using PC2 or PC3, or when the setting of the PC is changed. (See page 23.) • The screen is adjusted automatically when SELF ADJUST in the OPTION menu is set to “ON”. (See page 19.) 10 AV1 input terminal AV2 input terminals Cr/Pr Y AV audio input terminals Cb/Pb AV3 input terminal PC1 input terminal PC2 input terminal Connection with AV equipment E Downloaded From TV-Manual.com Manuals • Use a commercially available signal cable (DVI-D 24 pin) for the AV1 input terminal. Set DVI SELECT on the OPTION menu to AV (DIGITAL) when using the AV1 input terminal. (See page 19.) • Use a commercially available component cable (BNC) for the AV2 input terminals. Set BNC SELECT on the OPTION menu to AV (COMPONENT) when using the AV2 input terminals. (See page 19.) • Use a commercially available video cable (BNC) for the AV3 input terminal. • Use a commercially available audio cable (RCA) for the AV audio input terminals. • The AV1 input terminal is compatible with the video signals below: 1920 x 1080 p @ 50/59.94/60 Hz 1920 x 1080 i @ 50/59.94/60 Hz 1280 x 720 p @ 50/59.94/60 Hz 720 x 576 p @ 50 Hz 720 x 480 p @ 59.94/60 Hz 640 x 480 p @ 59.94/60 Hz • The AV2 input terminals are compatible with the video signals below: 1080i (1125i)/50, 1080i (1125i)/60, 720p (750p)/50, 720p (750p)/60, 576p (625p), 576i (625i), 480p (525p), 480i (525i) Other terminals Connecting multiple monitors PC/AV audio output terminals • Audio from the equipment connected to the AV audio input terminals or PC audio input terminal is output. Connect to the audio input terminals of the connected equipment using a commercially available audio cable (RCA). • The audio output varies depending on the input mode selection. (See page 15.) • The volume level can be adjusted using the volume adjustment. (See page 15.) • Selecting FIXED of “AUDIO OUTPUT” from the OPTION menu fixes the volume of sound output from the audio output terminals. (See page 19.) • Audio signals output from the PC/AV audio output terminals cannot be adjusted using the AUDIO menu. You can connect multiple monitors (up to 5 monitors) in a daisy chain by using the PC1/AV1 input terminals and PC/AV output terminals of this monitor. ENGLISH Connecting Peripheral Equipment Connection example First monitor PC/AV output terminal Second monitor PC1/AV1 input terminals PC/AV output terminals Video signals from PC1 and AV1 can be output to HDCP-compatible external device. Use this terminal when you connect multiple monitors in a daisy chain via DVI cable (commercially available). (See the description on the right.) Images cannot be output to device that is not HDCP-compatible. RS-232C input/output terminals You can control the monitor from a PC by connecting a commercially available RS-232 straight cable between this terminal and the PC. (See page 25.) Digital signal (DVI) cables (commercially available) Connecting external speakers To PC digital RGB output terminal Be sure to use external speakers with an impedance of 6 Ω and a rated input of at least 7 W. (1) shows the signal flow (2) TIPS 1. While pushing the tab, insert the tip of the cable. 2. Release the tab. TIPS • Be sure to connect the + and - terminals and the left and right speakers properly. • Avoid short circuiting the + and - terminals. Downloaded From TV-Manual.com Manuals • The length of the signal cables or surrounding environment may affect the image quality. • The screen may not display properly when using terminals other than PC1/AV1 for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again. 11 E Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. Main power switch 1 3 2 AC input terminal For power outlet Power cord (Supplied) Preparing the Remote Control Unit Installing the batteries Remote control operation range 1. Press the cover gently and slide it in the direction of the arrow. The operation range of the remote control unit is approx. 5 m at an angle of approx 10° from the centre to the top/bottom/ right/left of the remote control sensor. Remote control sensor 5m 5m 2. See the instructions in the compartment and put in the supplied batteries (2 AA/R6 batteries) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS • The supplied batteries (2 AA/R6 batteries) may become exhausted faster depending on the storage condition. It is recommended that you replace them with new batteries (commercially available) earlier than specified. • If you will not use the remote control for a long time, remove the batteries. • Use manganese or alkaline batteries only. 12 E Downloaded From TV-Manual.com Manuals 10° 5m 10° TIPS • Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction. • Do not expose the remote control unit to liquids, and do not place it in an area with high humidity. • The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting. • Objects between the remote control unit and the remote control sensor may prevent proper operation. • Replace the batteries when they run low as this may shorten the remote control’s operation range. • If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation. • Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc. Removing the Temporary Stand ENGLISH Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.) Caution • The monitor is heavy. It must be handled by 2 or more people. • This monitor is fixed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use only until the monitor is properly mounted. 1. Hold the monitor with the handles to prevent it from falling down, and remove the stand fixing screws (4). (Rear view) 2. Lift the monitor by holding it with the handles and the underside of the unit. 3. When the installation is complete, attach the included stand hole protection covers, using the supplied screws. (1) Fold the sheet perpendicularly with the adhesive side inward. (2) Remove the adhesive cover and attach the sheet to the monitor. • The temporary stand is specifically designed for this monitor. Do not use for other devices. Downloaded From TV-Manual.com Manuals 13 E Turning Power On/Off Caution TIPS • Turn on the monitor first before turning on the PC or playback device. Turning on the main power • If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode. • You can turn on/off the monitor by pressing the power switch of the monitor. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. Date/time setting • If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. Set the date and time. DATE/TIME SETTING / Main power switch SET 20 / 07 / : 01 / 01 : 00 : 00 CANCEL When the main power switch is off, the monitor cannot be turned on using the POWER button on the remote control unit. OK···[MENU] Turning power on/off Press the POWER button to turn the power ON/OFF. 1. Press , , or to select the date and time, and press or to change the numerical values. 2. Select SET and then press MENU . • Be sure to set the date and time. • The date/time setting screen will close automatically if no operation is performed for about 15 seconds. The date and time can be set using DATE/TIME SETTING from the OPTION menu when the date/time setting screen disappears. INPUT TIPS Power LED Status of a power LED Green lighting Orange lighting Status of the monitor Power “On” Power “Off” (Standby mode) Green flashing Input signal standby mode (input using a PC) Caution • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. 14 E Downloaded From TV-Manual.com Manuals • Set the date in “Year/Month/Day” order. • Set the time on a 24-hour basis. • The clock stops after the power-off status continues for approximately 1 week.* The date/time setting screen appears at power-on. Be sure to set the date and time. (* This is a guide. The power-off status that stops the clock depends on the status of the monitor.) Disabling power on/off operations Power on/power off operations can be disabled in order to protect the monitor from an accidental power off. Set the ADJUSTMENT LOCK in FUNCTION menu to “2”. (See page 24.) Basic Operation 1 BRIGHT 2 3 ENGLISH 5. BRIGHT +/- (Backlight adjustment) Pressing or displays the BRIGHT menu when the menu screen is not displayed. 15 Press or to adjust the brightness. * If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. 4 5 6. SIZE (Screen size selection) The menu is displayed. Press or to select the screen size. (See page 16.) 7. DISPLAY Displays monitor information. The display disappears when this button is pressed again or disappears automatically after approximately 15 seconds. 6 7 8 INFORMATION 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter. * You can select the input terminal by pressing the input switch of the monitor. Input mode Video PC1 DIGITAL*1 PC1 input terminal PC2 ANALOG PC2 input terminal PC3 ANALOG*2 PC3 input terminals AV1 DIGITAL*1 AV1 input terminal AV2 COMPONENT*2 AV2 input terminals AV3 VIDEO AV3 input terminal Audio PC audio input terminal AV audio input terminals *1 Select the terminal for DVI SELECT. (See page 19.) *2 Select the terminal for BNC SELECT. (See page 19.) 2. MUTE Turns off the volume temporarily. Press the MUTE button again to turn the sound back to the previous level. XXXX/XX/XX XXX INPUT MODE : PC2 ANALOG SIZE : WIDE COLOR MODE : STD BRIGHT : 15 VOLUME : 15 ID No. : 0 MODEL : GD-F65L1 S/N : 1024x768 V: 60 Hz XX:XX:XX H: 48.4 kHz 8. MODE (Colour mode selection) Each time you press this button, the colour mode changes in the following order: STD (Standard) → VIVID → sRGB → STD... • sRGB applies to PC input only. sRGB is international standard of colour representation specified by IEC (International Electrotechnical Commission). Colour conversion is made in taking account of liquid crystal’s characteristics and represents colour tone close to its original image. 3. MENU Displays and turns off the menu screen (see page 17). 4. VOL +/- (Volume adjustment) Pressing or displays the VOLUME menu when the menu screen is not displayed. VOLUME 15 Press or to adjust the volume of the sound. * If you do not press any buttons for about 4 seconds, the VOLUME menu automatically disappears. Downloaded From TV-Manual.com Manuals 15 E Basic Operation Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE ZOOM 1 PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. The edges of the image may be cut off. AV input ZOOM 2 PC input Use this size if ZOOM 1 cuts off the subtitles. AV input NORMAL DotbyDot *: PC input Displays image so it fills the screen without changing the aspect ratio of the input signals. AV input Displays the entire image of the aspect ratio of 4:3 without changing the aspect ratio. PC input Displays the dots of the signals input from the connected PC as the corresponding dots on the screen. * AV input Displays the dots of the input signals as the corresponding dots on the screen. With a monitor with a screen resolution of 1600 x 1200, selecting DotbyDot displays the NORMAL screen. TIPS • Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful. • When “Enlarge” is set, the screen size is fixed to “WIDE” mode. • When dual-screen display is selected, the screen size cannot be changed. • The appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e.g. TV broadcast or video input from external equipment). • When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen size to “NORMAL”. • When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction. • Depending on the original image size, black bands may remain at the edges of the screen. 16 E Downloaded From TV-Manual.com Manuals Menu Items Displaying the menu screen 1 Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 18 to 20 for details of each menu items. SCREEN PICTURE Example of operation (Adjusting CONTRAST in the PICTURE menu) 1. Press MENU SCREEN to display the menu screen. SCREEN SETUP PHASE H-POS OPTION V-POS ENLARGE RESET 1 2 3 4 H: 48.4 kHz CONTRAST 30 BLACK LEVEL 96 OPTION SHARPNESS 12 H: 48.4 kHz OK···[MENU] Name of the menu Input mode An item being selected (highlighted) Screen resolution of input signal, and other data. . TIPS • Items that cannot be selected appear in grey. (e.g. Function not supported by the current input signal) to select CONTRAST. or 3. Press V: 60 Hz END···[MENU] 2. Press or to select PICTURE, and press PICTURE menu is displayed. SCREEN AUDIO 1024x768 PIP/PbyP V: 60 Hz PC2 ANALOG AUTO PIP/PbyP PC2 ANALOG 127 31 150 31 1024x768 1/2 4 ENLARGE 1/1 CLOCK AUDIO PICTURE 2 SETUP AUTO PICTURE 3 ENGLISH Menu screen display 1/2 PICTURE PC2 ANALOG AUTO PICTURE AUDIO CONTRAST 30 SETUP BLACK LEVEL 96 OPTION SHARPNESS 12 ENLARGE PIP/PbyP 1024x768 4. Press or SCREEN V: 60 Hz H: 48.4 kHz OK···[MENU] to adjust the setting. 1/2 PICTURE PC2 ANALOG AUTO PICTURE AUDIO CONTRAST 40 SETUP BLACK LEVEL 96 OPTION SHARPNESS 12 ENLARGE PIP/PbyP 1024x768 For items that have MENU press . 5. Press MENU V: 60 Hz H: 48.4 kHz , press OK···[MENU] , make settings and then twice to close the menu screen. TIPS • The menu will differ depending on the input mode. • The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING and SCHEDULE screens will close in about 4 minutes.) Downloaded From TV-Manual.com Manuals 17 E Menu Items Menu item details The menu will differ depending on the input mode. SCREEN (PC2/PC3) AUTO The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustment when you use the PC2 input terminal or PC3 input terminals to display a PC screen for the first time or when you change the setting of the PC. (See page 23.) COLOR MODE Changes the colour mode on the screen. The colour mode on the screen can also be changed using a remote control unit. (See page 15.) * sRGB is PC input only. See page 15 for details. WHITE BALANCE THRU.............. Displays the input signal level as is. (for PC1 only) PRESET ......... Selects the colour temperature using PRESET. USER .............. Used for adjusting R-CONTRAST, G-CONTRAST, and B-CONTRAST respectively. CLOCK PRESET Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. Selects the colour temperature when the WHITE BALANCE is set to PRESET. PHASE R-CONTRAST Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/ or there are flickers at corners. * Adjustments to PHASE should be made only after CLOCK has been correctly set. Adjusts red component when the WHITE BALANCE is set to USER. H-POS Adjust the horizontal position of the image. V-POS Adjust the vertical position of the image. RESET Resets the values of the SCREEN menu items to the factory preset values. MENU Select “ON” and then press . PICTURE AUTO (PC2/PC3) The CONTRAST and BLACK LEVEL are automatically adjusted. Pressing performs adjustment. CONTRAST Adjusts the brightness of the image. BLACK LEVEL Adjusts the entire brightness of the video signals. TINT (AV input) Adjusts the hue. Selecting + changes the colour towards green, and selecting - changes it towards magenta. G-CONTRAST Adjusts green component when the WHITE BALANCE is set to USER. B-CONTRAST Adjusts blue component when the WHITE BALANCE is set to USER. COPY TO USER Copies the value set for PRESET to the USER setting. MENU Select “ON” and then press . GAMMA Select a gamma value. RESET Resets the values of the PICTURE menu items to the factory preset values. MENU Select “ON” and then press . AUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. COLORS (AV input) RESET Adjusts the colour intensity. Resets the values of the AUDIO menu items to the factory preset values. MENU Select “ON” and then press . SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 22.) 18 E Downloaded From TV-Manual.com Manuals SETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. Menu Items Adjusts the vertical display position of menu screen. DATE/TIME SETTING LANGUAGE Set the date and time. Press or to select the date and time, and press or to change the numerical values. Set the date in “Year/Month/Day” order. Set the time on a 24-hour basis. Sets the display language for the menu screen. ID No. SET Assigns ID numbers to monitors connected in a daisy chain (see page 26), using RS-232 cables. The numbers 1 to 255 are available for ID numbers. If “0” is set, the system regards this as the state where no ID number is set. PICTURE FLIP STANDARD MIRROR ABC UPSIDE DOWN CBA ROTATE ABC ABC A picture flips to appear. POWER ON DELAY You can delay the screen display after the monitor is turned on. The period can be set up to 60 seconds in units of one second. When this function is activated, the power LED flashes (at approx. 1 second interval) in orange. This function is disabled when 0 is specified. ENGLISH OPTION OSD V-POSITION SCHEDULE (See page 22.) You can set the time to switch the monitor on and off. DVI SELECT Selects equipment that is to be connected to the PC1/AV1 input terminal. BNC SELECT Selects equipment that is to be connected to the PC3/AV2 input terminals. QUICK SHOOT Reduces the visual lag inherent in fast-motion scenes. COLOR SYSTEM Select the colour system of the AV equipment which is connected to AV3 input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43) When AUTO is selected, the colour system is automatically set according to the input signal. AUDIO OUTPUT Sets the volume of sound output from the PC/AV audio output terminals. VARIABLE .......... You can adjust the volume using VOLUME. FIXED .................Fixes the sounds. 480LINES (PC2/PC3) If a computer connected to the PC2/PC3 input terminal has a resolution of 640 x 480 or 848 x 480, make a selection according to the resolution. 768LINES (PC2/PC3) If a computer connected to the PC2/PC3 input terminal has a resolution of 1024 x 768, 1280 x 768 or 1360 x 768, make a selection according to the resolution. SELF ADJUST On a PC2/PC3 screen with a resolution of 800 x 600 or higher, specify whether to perform screen adjustment automatically or not. When ON is selected, the screen is automatically adjusted when the timing of input signals varies. “ADJUSTING” appears on the screen during the adjustment. POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode when the PC screen is displayed. Downloaded From TV-Manual.com Manuals 19 E Menu Items ENLARGE (PC input) ENLARGE MODE Sets the number of screen splits used for the enlargement. (See page 21.) ENLARGE POS Specify the split screen to be displayed when the enlargement function is used. (See page 21.) BEZEL H / BEZEL V Sets the frame width of the display when the enlargement function is used. H-POS Adjust the horizontal position of the enlarged screen. TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST and GAMMA cannot be set. • If COLOR MODE is set to sRGB or VIVID, the following items cannot be set. WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, COPY TO USER, and GAMMA Dual screen display You can display the screens of the PC input signal and AV input signal simultaneously. Set this function with “PIP MODES” in the PIP/PbyP menu. PIP V-POS Sub screen Adjust the vertical position of the enlarged screen. PIP/PbyP PbyP Main screen PIP MODES Sets the display method. OFF .........Displays one screen. PIP ...........Displays a sub screen inside a main screen. PbyP ........Displays a main screen and a sub screen in a line. PbyP2 ......Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. PIP SIZE Sets the size of the sub screen in PIP mode. PIP H-POS Adjusts the horizontal position of the sub screen in PIP mode. PIP V-POS Adjusts the vertical position of the sub screen in PIP mode. PIP BLEND In PIP mode, use this menu item to display the sub screen transparently. PIP SOURCE Selects the input signal of the sub screen in PIP, PbyP, or PbyP2 mode. SOUND CHANGE Sets the sound which is output in PIP, PbyP, or PbyP2 mode. If the main screen is displayed as a full screen by the AUTO OFF function, the sound for the main screen is output even when the sound for the sub screen is specified. MAIN POS Sets the position of the main screen in PbyP or PbyP2 mode. PbyP2 POS Sets the position of the sub screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO............ Displays the main screen as a full screen. 20 E Downloaded From TV-Manual.com Manuals A sub screen is displayed inside a main screen. Main screen Sub screen PbyP2 Main screen Sub screen A main screen and a sub screen are displayed in a line. Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. * The currently selected input signal is displayed on the main screen. * You cannot simultaneously display the screens of signals of the same type, such as two types of PC input signals or two types of AV input signals. TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The DotbyDot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the screen cannot be enlarged. • When dual-screen display is selected, the following adjustments of ADVANCED are invalid and adjusting is disabled. 3D-NR, MPEG-NR and 3D-Y/C Menu Items ENGLISH Enlarge You can align 4, 9, 16, or 25 monitors and integrate them into a single large screen to display. Enlarged views of separated images are displayed in each monitor. Original image 25 monitors 16 monitors 9 monitors 4 monitors 0 1 2 0 1 2 3 4 3 5 6 7 8 9 0 1 2 4 5 6 7 10 11 12 13 14 9 10 11 15 16 17 18 19 13 14 15 20 21 22 23 24 0 1 3 4 5 8 2 3 6 7 8 12 TIPS • AV input signals cannot be used for the Enlarge function. • To integrate 9 or more monitors using PC1 signals, a splitter for the video signal (commercially available) is required. • When connected in PC2/PC3, a splitter for the video signal (commercially available) is required. Downloaded From TV-Manual.com Manuals 21 E Menu Items SCHEDULE Caution You can set the time to switch the monitor on and off. Set this function with “SCHEDULE” in the OPTION menu. (See page 19.) PC2 ANALOG SCHEDULE XXXX/XX/XX XXX XX:XX:XX No. (1) POWER (2) DAY OF THE WEEK (3) TIME (4) INPUT (5) • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See pages 14 and 19.) SCHEDULE does not function unless the date and time are specified. • Check regularly that the set date and time are correct. TIPS • Up to 8 SCHEDULE items can be registered. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap. 1024x768 V: 60 Hz H: 48.4 kHz ADVANCED items (AV input) (See page 18.) OK…[MENU] FLESH TONE 1. Press or to select the SCHEDULE number, and press . 2. Set the SCHEDULE. (See the description below.) Press or to select items, and press change the setting. or to MENU 3. Press . SCHEDULE becomes effective. (1) ●: SCHEDULE effective -: SCHEDULE not effective (2) POWER ON : Switches the monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor in standby mode. (3) DAY OF THE WEEK Specifies the day of the week to execute the SCHEDULE. ONLY ONCE: Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE. EVERY WEEK: Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the SCHEDULE. Periodic setting such as “Monday through Friday” is also possible. EVERY DAY: Executes the SCHEDULE every day regardless of the day of the week. (4) TIME Specifies the time to execute the SCHEDULE. Set the time on a 24-hour basis. (5) INPUT Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears. Input modes displayed on “PC1/AV1” depend on DVI SELECT settings. Input modes displayed on “PC3/AV2” depend on BNC SELECT settings. 22 E Downloaded From TV-Manual.com Manuals Adjust the hue control. 3D-NR Reduce the noise of playback images on video. Setting a higher level reduces more noise. However, it may cause blurring on an image. MPEG-NR Reduce block noise caused by digital compression. 3D-Y/C (AV3) Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-colour is occurring in fast-motion scenes, selecting “OFF” may improve the image quality. Menu Items ENGLISH Adjustments for PC screen display Automatic adjustment When you use the PC2 input terminal or PC3 input terminals to display a PC screen for the first time, or when you change the setting of the PC, use the automatic screen adjustment. 1. Switch the input to PC2 or to PC3. MENU 2. Press and use or to display the SCREEN menu. 3. Press and select “AUTO”. . 4. Press The automatic adjustment is complete in several seconds. 5. Press MENU twice to close the menu screen. TIPS • If the screen cannot be adjusted properly with one automatic adjustment, repeat the automatic adjustment two or three times. Try manual adjustment if necessary. Screen display for adjustment Before making adjustments in the SCREEN menu or PICTURE menu, display an image to brighten the entire screen. Downloaded From TV-Manual.com Manuals 23 E Initialisation (Reset)/Functional Restriction Setting You can return the settings to their factory-preset values and restrict operations. 1. After pressing , SIZE , and for about 5 seconds, press , in that order. FUNCTION 1/1 ALL RESET ADJUSTMENT LOCK OFF OSD DISPLAY ON LED RS-232C ON UNLOCKED END···[MENU] 2. Select and set the items. ALL RESET Resets the settings to the factory default settings. MENU Press , select “ON” and then press . After initialisation, turn the main power switch off and then back on. ADJUSTMENT LOCK You can disable operations on the monitor and the remote control unit that use buttons. OFF ...Enables operation. 1 ........Disables all operations other than turning power on/off and FUNCTION. 2 ........Only the FUNCTION operation is enabled. Disables all operations other than FUNCTION (not even power on/off). OSD DISPLAY Hides/shows menus. The FUNCTION screen cannot be hidden. ON ...........Displays the menus. OFF .........Hides the menus. LED Specifies whether to light power LEDs. ON ...........Lights power LEDs. OFF .........Does not light power LEDs. RS-232C Specifies whether to allow control via RS-232C (see page 25). LOCKED .............Disables control via RS-232C. UNLOCKED........Enables control via RS-232C. 3. Press 24 MENU to return to the normal screen. E Downloaded From TV-Manual.com Manuals Controlling the Monitor with a PC PC connection One-to-one connection with a PC Connect with RS-232 straight cable between the PC’s COM port (RS-232C connector) and the RS-232 input terminal on the monitor. Communication conditions ENGLISH You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 26), you can make input mode selection/adjustment or can check the status of a specific monitor. Set the RS-232C communication settings on the PC to match the monitor’s communication settings as follows: Baud rate 9600 bps Stop bit 1 bit Data length 8 bits Flow control None Parity bit None Communication procedure Command format When a command is sent from the PC to the monitor, the monitor operates according to the received command and sends a response message to the PC. Return code C1 RS-232C input terminal PC To COM port RS-232 straight cable (commercially available) Daisy chain connection… Advanced operation Connect with RS-232 straight cable between the PC’s COM port (RS-232C connector) and the RS-232C input terminal on the first monitor. Next, connect RS-232 straight cable to the first monitor’s RS-232C output terminal and to the second monitor’s RS-232C input terminal. Connect in the same way to the third and subsequent monitors. Up to 25 monitors can be connected. (Depending on the length of the cable used and the surrounding environment.) First monitor Second monitor C2 C3 C4 P1 P2 P3 P4 Parameter field (4 character string comprised of: 0-9, +, -, space, ?) Command field (4 prescribed alphanumerical characters) Example: VOLM0030 VOLM 30 * Be sure to input 4 characters for the parameter. Pad with spaces (“ ”) if necessary. (“ ” is a return code (0DH, 0AH or 0DH)) Wrong : VOLM30 Right : VOLM 30 When inputting a negative value, specify a numerical value in three digits. Example: AUTR-009 Do not use spaces for MPOS, DATE, and SC01 through SC08. Specify parameters using a specified number of characters. Example: MPOS010097 If a command has “R” listed for “DIRECTION” in the “RS-232C command table” on page 29, the current value can be returned by using “?” as the parameter. RS-232C input terminal Example: RS-232C output terminal VOLM ? ? ? ? ← From PC to monitor (How much is current volume setting?) 30 ← From monitor to PC (Current volume setting: 30) * If an ID number (see page 26) has been assigned (For example, ID number = 1) VOLM ? ← From PC to monitor 30 001 ← From monitor to PC PC To COM port RS-232 straight cables (commercially available) Downloaded From TV-Manual.com Manuals 25 E Controlling the Monitor with a PC Response code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Return code (0DH, 0AH) Space (20H) O K SPC 0 0 1 Communication interval • After OK or ERR is returned, you must send the following commands. To set a timeout for the command response, specify 10 seconds or longer. • Provide an interval of 100 ms or more between the command response and the transmission of the next command. VOLM0020 OK Interval of 100 ms or more ID number of responding monitor INPS0001 WAIT OK When a command has not been executed E R R Return code (0DH, 0AH) * If an ID number has been assigned Space (20H) E R R Advanced operation This section explains commands for daisy chain connection. The basic communication procedure is the same as in the “One-to-one connection with a PC” section. Return code (0DH, 0AH) SPC 0 0 1 ID number ID numbers TIPS • “ERR” is returned when there is no relevant command or when the command cannot be used in the current state of the monitor. • If communication has not been established for reasons such as a bad connection between the PC and monitor, nothing is returned (not even ERR). • If no monitor has been assigned the designated ID number (e.g. if the command IDSL0002 is used, but no monitor with ID number: 2 is found), no response is returned. If execution of the command is taking some time W A I T Return code (0DH, 0AH) When the following commands are used, “WAIT” is returned. In this case, a value will be returned if you wait a while. Do not send any command during this period. No ID number is attached to WAIT response. • Commands which return WAIT: 1. When repeater control is used 2. When an IDSL or IDLK command is used 3. When one of the following commands is used: RSET, INPS, ASNC, WIDE, EMAG, EPOS, PXSL, POWR, AGIN, MWIN, MWIP, MWPP, ESTG When control via RS-232C is locked (to prevent use) using the operation lock function (see page 24) L 26 O C K E D E Downloaded From TV-Manual.com Manuals Return code (0DH, 0AH) You can assign a unique ID number to each monitor (see page 19). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen (using the remote control) or from the PC using RS-232 cable. [Example] ID number: 1 ID number: 2 ID number: 3 ID number: 4 If monitors are connected as shown above, you can execute commands like “Set the volume of the monitor with ID 4 to 20”. When controlling monitors linked in a daisy chain by designating ID numbers, you should basically avoid any duplication of ID numbers. ID numbers do not have to be assigned in ascending order starting from the PC. They can also be connected as shown below. [Example] ID number: 3 ID number: 2 ID number: 4 ID number: 1 Controlling the Monitor with a PC The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDLK ........The parameter of this command sets the ID number of the monitor. The monitor is subject to all subsequent commands. Example: IDLK0002 WAIT IDST .........A monitor receiving this command sets its own ID number in the parameter field. Example: IDST0001 OK 001 ← The ID number of this monitor is set to 1. ENGLISH Commands for ID control OK 002 VOLM0030 WAIT OK Following commands are for the monitor ← with ID number: 2. ← Searching for monitor with ID number: 2 ← Found monitor with ID number: 2 Sets volume of monitor with ID number: ← 2 to 30.* ← Processing 002 VOLM0020 Sets volume of monitor with ID number: ← 2 to 20.* WAIT OK TIPS You can automatically assign ID numbers by using the IDST command with the Repeater control (see “Repeater control” on page 28). For example, using the command “IDST001+” automatically sets the ID numbers, as shown below. [Example] IDST001 + WAIT OK 001 OK 002 OK 003 OK 004 ID number: 2 ID number: 3 ID number: 4 ← ID setting command with repeater control ← ← ← ← “OK” response from ID number: 1 “OK” response from ID number: 2 “OK” response from ID number: 3 “OK” response from ID number: 4 (End) IDSL ........The parameter of this command sets the ID number of the monitor. The monitor is subject to the next command. Example: IDSL0002 WAIT OK 002 VOLM0030 WAIT OK ← Canceling fixed ID number setting WAIT ← Canceling IDLK OK 002 The next command is for the monitor with ← ID number: 2. ← Searching for monitor with ID number: 2 ← Cancelation complete 001 The volume of the monitor with ID number: 1 ← (the one directly connected to the PC) is set to 10. (IDLK is canceled.) * The IDLK command remains effective until it is canceled, or power is shut off. IDCK ........Provides screen display of the ID number currently assigned to a monitor, and the ID number currently set for IDLK (if any). Example: (After executing IDLK0002) ← (Parameter has no meaning.) IDCK0000 Returned response. The ID IDLK : 002 ← number is also displayed on the IDCK000 + WAIT ID : 001 IDLK : 000 ID : 002 IDLK : 000 ID : 003 IDLK : 000 ID : 004 IDLK : 000 ← Repeater control (If a command ID : 001 monitor screen. is used with repeater control, ID designation using IDSL or IDLK is canceled.) ← Found monitor with ID number: 2 Sets volume of monitor with ID number: ← 2 to 30. ← Processing OK response from monitor with ID VOLM0020 ← number: 2 ← Sets volume to 20. OK ← number: 1 (the one directly connected 001 002 VOLM0010 OK ID number: 1 002 IDLK0000 The volume of the monitor with ID to the PC) is set to 20.* * The IDSL command is effective only once, for the immediately succeeding command. Downloaded From TV-Manual.com Manuals 27 E Controlling the Monitor with a PC Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 Set 3 Set 4 * If monitors are connected as shown above, you can execute a command like “Set all monitors’ input settings to PC1 DIGITAL”. Repeater control command Repeater control is achieved by setting the FOURTH CHARACTER of the parameter to “+”. Example: VOLM030 + ← Sets volume of all monitors to 30. In repeater control, responses are returned by all the connected monitors. If you want to determine that a value has been returned by a specific set, assign ID numbers to each monitor in advance. When some monitors do not return their responses, the probable cause is that the monitors could not receive the command or command processing is not complete. Do not send a new command. Example: (When 4 monitors are connected, and assigned ID numbers: 1 through 4) VOLM030 + WAIT OK 001 OK 002 OK 003 OK 004 ← If 4 monitors are connected in a chain, reliable operation can be ensured by sending a new command only after a reply has been returned by 4th (last) monitor. Repeater control can also be used for reading settings. Example: VOLM ? ? ? + WAIT 10 001 20 002 30 003 30 004 Volume settings for all monitors are returned. TIPS • If repeater control is used during ID designation (IDSL, IDLK), the ID designation is canceled. • Commands that use parameters consisting of more than four characters can not be controlled by repeater control. 28 E Downloaded From TV-Manual.com Manuals Controlling the Monitor with a PC ENGLISH RS-232C command table How to read the command table Command: Command field (See page 25.) Direction: W When the “Parameter” is set in the parameter field (see page 25), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” or “???+” (repeater control) in the parameter field (see page 25). Parameter: Parameter field (See page 25.) Reply: Response (Returned value) *: “Yes” indicates commands which can be used in power standby mode. Power control/Input mode selection Function POWER CONTROL Command Direction POWR W Parameter Reply Control/Response contents 0 * Switches to standby mode. 1 Returns from standby mode. R Yes 0 Standby mode 1 Normal mode 2 Input signal waiting mode INPUT MODE SELECTION INPS W 0 Toggle change for input mode Terminals not selected in DVI SELECT/BNC SELECT cannot be selected. 1 PC1 DIGITAL “ERR” when AV (DIGITAL) is selected for DVI SELECT. 2 PC2 ANALOG 3 AV2 COMPONENT “ERR” when PC (ANALOG) is selected for BNC SELECT. 4 AV3 VIDEO 6 PC3 ANALOG “ERR” when AV (COMPONENT) is selected for BNC SELECT. 7 AV1 DIGITAL “ERR” when PC (DIGITAL) is selected for DVI SELECT. R Yes 1 PC1 DIGITAL 2 PC2 ANALOG 3 AV2 COMPONENT 4 AV3 VIDEO 6 PC3 ANALOG 7 AV1 DIGITAL SCREEN menu (PC2/PC3) Command Direction AUTO Function ASNC W CLOCK CLCK WR 0-255 PHASE PHSE WR 0-63 POSITION OF THE LONGEST DIRECTION HPOS WR 0-500 POSITION OF THE SHORTEST DIRECTION VPOS WR ARST W POSITIONING RESET Parameter Reply Control/Response contents 1 * No 0-255 0-63 0-500 A maximum value depends on a resolution. No Downloaded From TV-Manual.com Manuals 0-100 1 0-100 No 29 E Controlling the Monitor with a PC PICTURE menu Command Direction AUTO Function AGIN W CONTRAST CONT WR 0-60 0-60 0-127 on PC2/PC3. BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC2/PC3. TINT TINT WR 0-60 0-60 When the input mode is AV. COLORS COLR WR 0-60 0-60 0-24 SHARPNESS ADVANCED Reply Control/Response contents 1 When the input mode is PC2, PC3. SHRP WR 0-24 FLESH TONE FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH 3D-NR TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH MPEG-NR MPNR WR 0-1 0-1 0: OFF, 1: ON 3D-Y/C YCSP WR 0-1 0-1 0: OFF, 1: ON BMOD WR 0 0 STD 2 2 VIVID 3 3 sRGB (When the input mode is PC) COLOR MODE WHITE BALANCE Parameter THRU CTMP WR PRESET 0 Yes Yes Yes 0 When the input mode is PC1. 1-15 USER * No 1-15 From 1: approximately 3,000K to 15: approximately 10,000K (500K steps) 99 99 Yes R-CONTRAST CRTR WR 0-512 0-512 “ERR” when CTMP is not set to 99. G-CONTRAST CRTG WR 0-512 0-512 B-CONTRAST CRTB WR 0-512 0-512 GAMMA GAMM WR 0-2 RESET ARST W 0-2 0: 1.8, 1: 2.2, 2: 2.4 Yes 2 No AUDIO menu Function Command Direction TREBLE AUTR WR Parameter -10-10 Reply -10-10 Control/Response contents BASS AUBS WR -10-10 -10-10 BALANCE AUBL WR -10-10 -10-10 RESET ARST W * Yes 3 No SETUP menu Function LANGUAGE ID NUMBER ID NO. SETTING Command Direction LANG WR IDST W Parameter Reply 14 1 1 DEUTSCH 2 2 FRANÇAIS 3 3 ITALIANO 4 4 ESPAÑOL 5 5 РУССКИЙ 6 6 0-255 Sets the monitor’s ID number. (“0” means “no ID number”.) R ID NO. SETTING (ONCE) IDSL W 0-255 Returns the monitor’s ID number. 1-255 Sets a monitor ID number. This ID number is only effective for the command immediately after this command. 0 W ID NO. SETTING (SUBSEQUENT) IDLK ID CHECK IDCK W 1-255 PICTURE FLIP PFIL WR 0-3 Power On Delay PWOD WR 0 0 ID IDLK 1-60 30 * Yes Yes Yes Clears the ID number if one has been designated. Sets a monitor ID number. This ID number is effective for the next and all subsequent commands after this command. 0 E Downloaded From TV-Manual.com Manuals Control/Response contents 14 ENGLISH Yes Clears the ID number if one has been designated. : xxx : yyy Displays monitor’s own ID number and the selected ID number on the screen. 0-3 0: OFF, 1: MIRROR, 2: UPSIDE DOWN, 3: ROTATE 0 OFF 1-60 ON Yes Yes Yes Controlling the Monitor with a PC Command Direction DATE/TIME SETTING Function DATE WR AABBCCDDEE Parameter AABBCCDDEE Reply AA: Year, BB: Month, CC: Day, DD: Time, EE: Minute Control/Response contents Yes SCHEDULE SC01SC08 WR ABCDEFFGGH ABCDEFFGGH Schedule of a specified number A: Schedule 0 = Not effective, 1 = Effective B: Power 0 = OFF, 1 = ON C: Day of the week 1 0 = Only once, 1 = Every week, 2 = Every day D: Day of the week 2 0 = Sunday, 1 = Monday through 6 = Saturday, 9 = Not exist E: Day of the week 3 0 = Sunday, 1 = Monday through 6 = Saturday, 9 = Not exist F: Time 00-23 G: Minute 00-59 H: Input 0 = Not specified, 1 = PC1/AV1, 2 = PC2, 3 = PC3/AV2, 4 = AV3 Yes * DVI SELECT DVSL WR 0-1 0-1 0: PC (DIGITAL), 1: AV (DIGITAL) Yes BNC SELECT BNSL WR 0-1 0-1 0: PC (ANALOG), 1: AV (COMPONENT) Yes QUICK SHOOT (PC) QSPC WR 0-1 0-1 0: OFF, 1: ON Yes QUICK SHOOT (AV) QSAV WR 0-1 0-1 0: OFF, 1: ON Yes COLOR SYSTEM CSYS WR 0-5 0-5 0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43 Yes AUDIO OUTPUT AOUT WR 0-1 0-1 0: VARIABLE, 1: FIXED Yes RESOLUTION CHECK PXCK R PIXEL SETTING (PC2, PC3) PXSL WR INPUT RESOLUTION (PC) RESOLUTION CHECK INPUT RESOLUTION (AV) RESO ENGLISH OPTION menu - Returns current resolution in the form of hhh, vvv. 1 1 V: 768) 1360 x 768 2 2 V: 768) 1280 x 768 3 3 V: 768) 1024 x 768 5 5 V: 480) 848 x 480 6 6 V: 480) 640 x 480 R No - 480i, 480p, 1080i, 720p, 1080p, VGA, etc. No SELF ADJUST AADJ WR 0-1 0-1 0: OFF, 1: ON Yes POWER MANAGEMENT PMNG WR 0-1 0-1 0: OFF, 1: ON Yes ENLARGE menu (When the input mode is PC) Function Command Direction EMAG WR 0-4 WIDTH OF THE SHORTER SIDE BEZH WR 0-100 0-100 WIDTH OF THE LONGER SIDE BEZV WR 0-100 0-100 IMAGE POSITION (2 x 2) EPOS WR 0-3 IMAGE POSITION (3 x 3) EPOS WR 0-8 0-8 IMAGE POSITION (4 x 4) EPOS WR 0-15 0-15 IMAGE POSITION (5 x 5) EPOS WR 0-24 0-24 ENLARGED SCREEN POSITIONING THE LONGEST DIRECTION EPSH WR -999-999 -999-999 The setting range depends on the ENLARGE MODE setting and the IMAGE POSITION. THE SHORTEST DIRECTION EPSV WR -999-999 -999-999 ENLARGE/IMAGE POSITION SETTING ESTG WR XXYY ENLARGE MODE BEZEL WIDTH Parameter Reply Control/Response contents * 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 0-3 See page 21. No XXYY XX: Enlarge mode (Same as EMAG), YY: Image Position (Same as EPOS) PIP/PbyP menu Function PIP MODES Direction WR MPSZ WR THE LONGEST DIRECTION MHPS W THE SHORTEST DIRECTION MVPS PIP SIZE PIP POS Command MWIN PIP V/H-POS Parameter Reply 0-3 1-12 W Yes Yes 0-100 Yes 0-100 0-100,0-100 R Yes Specify the position in MPOSxxxyyy format. (xxx: Longer side, yyy: Shorter side position) 0-100,0-100 Returns a response in (xxx,yyy) format. (xxx: Longer side, yyy: Shorter side position) PIP BLEND MWBL WR 0-15 PIP SOURCE MWIP WR 1 1 PC1 DIGITAL 2 2 PC2 ANALOG 3 3 AV2 COMPONENT 4 4 AV3 VIDEO 6 6 PC3 ANALOG 7 * Yes Yes 0-100 R MPOS 1-12 0-100 R W Control/Response contents 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 0-15 Yes Yes Yes Yes 7 AV1 DIGITAL SOUND CHANGE MWAD WR 1-2 1-2 1: MAIN, 2: SUB Yes MAIN POS (Main screen) MWPP WR 0-1 0-1 0: POS1, 1: POS2 Yes PbyP2 POS (Sub screen) MW2P WR 0-2 0-2 0: POS1, 1: POS2, 2: POS3 Yes AUTO OFF MOFF WR 0-1 0-1 0: MANUAL, 1: AUTO Yes Downloaded From TV-Manual.com Manuals 31 E Controlling the Monitor with a PC Initialisation/Functional Restriction Setting (FUNCTION) menu Command Direction ALL RESET Functio RSET W Parameter Reply Control/Response contents ADJUSTMENT LOCK ALCK WR 0-2 0-2 0: OFF Yes OSD DISPLAY LOSD WR 0-1 0-1 0: ON, 1: OFF Yes LED OFLD WR 0-1 0-1 0: ON, 1: OFF Yes 0 * No Others Function Command Direction SCREEN SIZE (PC) WIDE WR SCREEN SIZE (AV) WIDE WR 1-5 VOLUME VOLM WR 0-31 0-1 MUTE Parameter Reply 1-5 Control/Response contents 1-5 1: WIDE, 2: NORMAL, 3: DotbyDot, 4: ZOOM1, 5: ZOOM2 1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: DotbyDot 0-31 MUTE WR MODEL INF1 R Value SERIAL NO SRNO R Value BRIGHT VLMP WR TEMPERATURE SENSOR DSTA R INFORMATION 0-31 * Yes Yes Yes 0-1 0: OFF, 1: ON No Yes 0-31 Brightness Yes 0 Internal temperature normal 1 Internal temperature abnormal (Standby mode) 2 Internal temperature abnormal (Temperature is normal now, but it was abnormal during operation.) Yes 3 Internal temperature abnormal (Brightness of the backlight decreases.) 4 Temperature sensor abnormal TEMPERATURE ACQUISITION CAUSE OF LAST STANDBY MODE ERRT STCA R W R Value Temperature at temperature sensors 1 through 3 are returned in the following forms: [Sensor 1], [Sensor 2], [Sensor 3] 0 Yes Initialisation 0 No detectable error has occurred 1 Standby mode by POWER button 2 Main power “OFF” by the main power switch 3 Standby mode by RS-232C 4 Waiting mode by No Signal (Incl: VESA DPMS/DMPM) 6 Standby mode by abnormal temperature 8 Standby mode by SCHEDULE setting 32 E Downloaded From TV-Manual.com Manuals Yes Troubleshooting There is no picture or sound. • Is the power cord disconnected? (See page 12.) • Is the main power switch set to “OFF”? (See page 14.) • Is the monitor in standby mode (the power LED illuminating in orange)? (See page 14.) • Make sure correct input mode is selected. (See page 15.) • If any external equipment is connected, make sure the equipment is operating (playing back). Remote control does not work. • Are the batteries inserted with polarity (+,-) aligned? (See page 12.) • Are the batteries exhausted? (See page 12.) • Point the remote control unit toward the monitor’s remote control sensor. (See page 12.) • Is the menu display hidden or is operation disabled? (See page 24.) Sound from left and right speakers is reversed. Sound is heard from only one side. • Are audio cables connected properly? (See pages 10 and 11.) • Make sure audio cables for external speakers are connected properly: left and right cables may be reversed or one of the two cables may not be connected. (See page 11.) • Check the setting of BALANCE for AUDIO menu. (See page 18.) There is a picture but no sound. • Is the sound muted? • Make sure the volume is not set to minimum. • Is the PC audio cable (commercially available) connected? • Are audio cables connected properly? • Is the audio signal input properly to the audio input terminal corresponding to the selected video input terminal? Unstable video. • The signal may be incompatible. • Try the automatic screen adjustment when the PC2 input terminal or PC3 input terminals is used. Power LED flashes red. “SERVICE CALL” appears in the corner of the screen. • Hardware has a problem. Turn off the monitor and request repair from your JVC dealer. ENGLISH Before calling for repair services, make sure following checks for possible remedies to the encountered symptoms. When “TEMPERATURE” is displayed. • When the internal temperature of the monitor rises excessively, the brightness of the backlight decreases in order to prevent high-temperature-related problems. Remove the cause of the excessive rise in temperature. (See the description below.) The monitor sometimes makes a cracking sound. • You may hear cracking sound from the monitor. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the monitor’s performance. ■ Warning when temperature rises • When the internal temperature of the monitor rises excessively, the brightness of the backlight decreases automatically in order to prevent high-temperaturerelated problems. When this occurs, “TEMPERATURE” is displayed on the screen and the Power LED flashes red and green alternately. • If the internal temperature rises further, the monitor automatically enters standby mode. (The Power LED continues flashing red and green alternately.) Solution: • If the monitor enters standby mode due to a rise in temperature, to return to normal display, turn the main power switch off and then back on again. The monitor, however, will enter standby mode again if the cause of the temperature rise is not eliminated. (See page 9.) • Check whether the monitor is placed at a location where a quick rise in temperature is likely. Internal temperature rises quickly if the vents on the monitor are blocked. • Internal temperature rises quickly if dust accumulates inside the monitor or around the vents. Remove dust if possible. Ask JVC dealer about removing internal dust. PC1 or AV1 does not appear properly. • Is the setting of DVI SELECT correct? (See page 19.) • Is the input signal compatible with this monitor? (See pages 10 and 35.) • Turn off the power to the connected equipment and then turn the power on again. • If the monitors are connected in a daisy chain, turn off the power to all the monitors connected in a daisy chain and then turn the power on again. PC3 or AV2 does not appear properly. • Is the setting of BNC SELECT correct? (See page 19.) • Is the input signal compatible with this monitor? (See page 35.) Control buttons do not work. There is no picture. • Some kind of load noises from outside might interfere with normal operation. Turn off the power and turn it on after waiting at least 5 seconds, and then check the operation. Downloaded From TV-Manual.com Manuals 33 E Specifications Product Specifications Model LCD element Max. resolution (pixels) Max. colours Pixel pitch Viewing angle Screen active area (mm) Computer input signal Sync signal GD-F65L1 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD 1920 x 1080 16.77 M colours (8 bits/colour) 0.744 mm (H) x 0.744 mm (V) 176° right/left/up/down (contrast ratio ≥ 10) 1428 x 804 Digital (DVI 1.0 standard-compliant), Analogue RGB (0.7 Vp-p) [75 Ω] Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz) Video colour system Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1 PC Analogue Mini D-sub 15 pin, 3 rows x 1, BNC *1*2 x 1 Audio 3.5 mm mini stereo jack x 1 AV Composite video BNC x 1 Component BNC (Y, Cb/Pb, Cr/Pr)*1 x 1 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Output terminals PC/AV Digital DVI-D 24 pin x 1 *3 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Speaker 7 W + 7 W [6 Ω] Power requirement AC 100 V - 240 V, 50/60 Hz Operating temperature 0°C to 40°C Operating humidity 20% to 80% (no condensation) Power consumption 550 W (Input signal waiting mode: 10 W, Standby mode: 4.0 W) Dimensions (mm) Approx. 1,572 x 126 x 923 (excluding protrusions) Weight (kg) Approx. 65 (excluding the temporary stand) *1 *2 *3 Cannot be used simultaneously. Does not support plug and play. Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function. Design and specifications are subject to change without notice. 34 E Downloaded From TV-Manual.com Manuals Specifications Note that the values shown are approximate values. Unit: mm 126 7 1572 1485 85 ENGLISH Dimensional Drawings 85 20 440 650 Screw holes for mounting brackets (M10 x 4 holes) 20 923 860 Opening height (807) Opening width (1432) 393 155 595 When mounting the monitor, read the manual of the brackets or stand for their mounting procedure. The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor. Note that screw hole depth of the monitor is 20 mm. Loose holding may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 10 mm length of thread. Use the bracket which can endure at least 4 times or more the weight of the monitor. Compatible signal timing (PC) VESA Screen resolution 640 x 480 800 x 600 848 x 480 1024 x 768 1152 x 864 1280 x 768 1280 x 960 1280 x 1024 Wide US TEXT Sun 1360 x 768 1600 x 1200*1 1280 x 720 1920 x 1080 720 x 400 1024 x 768 1152 x 900 1280 x 1024 1600 x 1000 Hsync 31.5 kHz 37.9 kHz 37.5 kHz 35.1 kHz 37.9 kHz 48.1 kHz 46.9 kHz 31.0 kHz 48.4 kHz 56.5 kHz 60.0 kHz 67.5 kHz 47.8 kHz 60.3 kHz 60.0 kHz 64.0 kHz 80.0 kHz 47.7 kHz 75.0 kHz 44.7 kHz 66.3 kHz 31.5 kHz 48.3 kHz 53.6 kHz 56.6 kHz 61.8 kHz 71.8 kHz 71.7 kHz 81.1 kHz 68.6 kHz Vsync 60 Hz 72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 70 Hz 60 Hz 66 Hz 70 Hz 66 Hz 76.2 Hz 67.2 Hz 76 Hz 66 Hz Dot frequency Analogue signal Digital signal Yes 25.175 MHz Yes 31.5 MHz Yes Yes 31.5 MHz Yes Yes 36.0 MHz Yes 40.0 MHz Yes Yes 50.0 MHz Yes Yes 49.5 MHz Yes Yes 33.75 MHz Yes Yes 65.0 MHz Yes Yes 75.0 MHz Yes Yes 78.75 MHz Yes Yes 108.0 MHz Yes Yes 79.5 MHz Yes Yes 102.25 MHz Yes Yes 108.0 MHz Yes Yes 108.0 MHz Yes Yes 135.0 MHz Yes Yes 85.5 MHz Yes Yes 162.0 MHz Yes Yes 74.4 MHz Yes Yes 148.5 MHz Yes Yes 28.3 MHz Yes Yes 64.13 MHz Yes 70.4 MHz Yes 74.25 MHz Yes 94.88 MHz Yes 108.23 MHz Yes 117.01 MHz Yes 134.99 MHz Yes 135.76 MHz Yes *1 Displays a reduced image. * All are compliant only with non-interlaced. * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. * The frequency values for the Sun are reference values. Downloaded From TV-Manual.com Manuals 35 E Specifications Power management This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor’s power management function to work. DPMS: Display Power Management Signaling DPMS ON STATE STANDBY SUSPEND OFF STATE DMPM: Digital Monitor Power Management Power Screen consumption Hsync Vsync DMPM Display 550 W No display 10 W Yes Yes No No Monitor ON Active OFF Yes No Yes No Power consumption 550 W Display 10 W No display Screen DDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. PC2 input terminal pins PC1/AV1 input terminal pins (Mini D-sub 15 pin) (DVI-D24 pin) No. 1 2 3 4 5 6 7 8 9 10 11 12 Function TMDS data 2TMDS data 2+ TMDS data 2/4 shield N.C. N.C. DDC clock DDC data N.C. TMDS data 1TMDS data 1+ TMDS data 1/3 shield N.C. No. 13 14 15 16 17 18 19 20 21 22 23 24 Function N.C. +5 V GND Hot-plug detection TMDS data 0TMDS data 0+ TMDS data 0/5 shield N.C. N.C. TMDS clock shield TMDS clock+ TMDS clock- No. 1 2 3 4 5 6 7 8 Function Red video signal input Green video signal input Blue video signal input N.C. GND GND for red video signal GND for green video signal GND for blue video signal No. 9 10 11 12 13 14 15 Function +5 V GND N.C. DDC data Hsync signal input Vsync signal input DDC clock PC/AV output terminal pins (DVI-D24 pin) RS-232C input terminal pins (D-sub 9 pin) No. 1 2 3 4 5 Function N.C. Transmitted data Received data N.C. GND No. 6 7 8 9 Function N.C. N.C. N.C. N.C. RS-232C output terminal pins (D-sub 9 pin) No. 1 2 3 4 5 36 Function N.C. Received data Transmitted data N.C. GND No. 6 7 8 9 Function N.C. N.C. N.C. N.C. E Downloaded From TV-Manual.com Manuals No. 1 2 3 4 5 6 7 8 9 10 11 12 Function TMDS data 2TMDS data 2+ TMDS data 2/4 shield N.C. N.C. DDC clock DDC data N.C. TMDS data 1TMDS data 1+ TMDS data 1/3 shield N.C. No. 13 14 15 16 17 18 19 20 21 22 23 24 Function N.C. +5 V GND Hot-plug detection TMDS data 0TMDS data 0+ TMDS data 0/5 shield N.C. N.C. TMDS clock shield TMDS clock+ TMDS clock- Downloaded From TV-Manual.com Manuals 0508STH-MW-SH © 2008 Victor Company of Japan, Limited Downloaded From TV-Manual.com Manuals 08E DSC1 TINSM1116MPZA(1)