Transcript
KI-115
HIGH POWER SINGLE 15" LOW FREQUENCY SPEAKER SYSTEM
Frequency Response
Vertical 1/3 Octave Polars
Impedance
115
60 55 50
105
45 35
95
30
Ohms
dB
40
25 20 85
15 10
Horizontal Off-Axis Transfer Function
15185
6739
Frequency
10047
4459
2991
1979
876
1309
581
390
258
173
77
114
51
34
23
15
0 10
15572
7442
Frequency
10698
5113
3557
2443
1679
802
1168
558
383
267
183
88
127
61
42
29
20
5 75
Directivity Index 20
12
18 6 dB
16 14 0 10 20 30 40
-6 -12
12
dB
0
10 8 6
-18
4
-24
2 20480
12902
8127
5120
3225
2032
1280
806
508
320
202
127
80
50
20
32
0
20480
Frequency
12902
8127
5120
3225
2032
1280
806
Frequency
Vertical Coverage (-6dB)
Horizontal Coverage (-6dB)
360
315
315
270
270
225
225
180 135
Coverage angle
360
180 135 90
90
45
45
12
-12 -18 -24
Frequency
20480
12902
8127
5120
3225
2032
1280
806
508
320
202
127
80
50
32
20
-30
dB
6
-6
0 10 20 30 40
20480
12902
8127
5120
3225
2032
1280
806
508
320
202
127
80
Frequency
Vertical Off-Axis Transfer Function UP
0
50
20
20480
12902
8127
5120
3225
2032
1280
806
508
320
202
127
80
50
32
20
Frequency
32
0
0
Coverage angle
508
320
202
127
80
50
32
20
-30
Horizontal 1/3 Octave Polars
HIGH POWER SINGLE 15" LOW FREQUENCY SPEAKER SYSTEM
The KI-115 professional subwoofer shall include a single 15" (381mm) K-48-EP low-frequency transducer utilizing a 3" (76.2mm) voice coil and 104-ounce (3.23kg) magnet.
14.762 24.500 Ref
The system shall be a Klipsch KI-115 loudspeaker.
12.589 8.500
9.250
9.250
8.500
Left Side View
Right Side View
Top View
10.125
19.563 Ref
12.250 Ref
19.563 Ref
The top and bottom panels shall be radiused, with a metal perforated grille for structural integrity and protection of the transducers from impact and tampering. The enclosure tuning shall be of a vented design. The enclosure finish shall be lacquer-based primer and lacquer-based texture paint with a black finish.
12.250 Ref Bottom View
This symbol represents the center of gravity.
3502 Woodview Trace Indianapolis, IN 46268
©2010 Klipsch Group, Inc. All rights reserved. Specifications subject to engineering changes.
Designed for high output, long-term reliability, the Klipsch KI-115 low frequency enclosure utilizes a single K-48-EP cast frame 15" woofer. This 104-ounce magnet, 3" voice coil powerhouse delivers high sensitivity with superior power handling. Klipsch’s specially designed speaker motor assembly ensures that high transient cone excursions won’t damage the voice coil former under extreme output applications.
Back View
Front View
10.125
Signal connections shall be made via two parallelwired Neutrik NL-4 Speakon panel mount jacks. The enclosure panels shall be CNC-fabricated, 3/4" furniture grade plywood, assembled utilizing rabbet and dado joinery. Dimensions for the enclosure shall be 18.438" (46.833cm) high by 19.563" (49.69cm) deep by 24.5" (62.23cm) wide in a rectangular shape. Net weight shall be 62 lbs. (28.148kg).
18.438 Ref
Frequency response shall be 49Hz to 300Hz, ±4dB, with the -10dB point at 37Hz, measured at three meters, half-space anechoic. Refer to graphs for horizontal and vertical dispersion angles and directivity. Sensitivity shall be 101dB SPL, measured at one meter, half-space anechoic, with a 2.83V input. Power handling shall be 400 watts (46 volts), to AES standards, continuous pink noise, 40Hz to 10kHz, 6dB peaks. Maximum continuous output at one meter shall be 125dB SPL. Nominal impedance shall be 8 ohms, with 5.3 ohms minimum at 42Hz.
9.712
6.039
Architectural Specifications
1-800-KLIPSCH • www.klipsch.com
Perfect for music reinforcement and reproduction, the KI-115 finds ready application in clubs, theaters, auditoriums, churches and performance environments. The rugged, tuned port, 3/4" furniture grade plywood enclosure utilizes CNC fabrication techniques for unform tolerances, contributing to advanced reliability and ruggedness. Dado “locktab” and rabbet joint construction contribute to freedom from resonance and cabinet-induced coloration.
Signal connections are provided via two parallel-wired Neutrik NL-4 Speakon panel mount jacks.
The KI-115 subwoofer utilizes radiused top and bottom panels with a perforated metal grille, and is black dual texture-coated for weather and corrosion resistance. The KI-115 is available with or without a passive crossover, and is compatible with Klipsch KI-102, KI-172, KI-262 and KI-272 full-range professional loudspeaker systems. Like all KI Series speakers, the KI-115 is covered by the Klipsch limited five-year warranty.
KI-115
● High power 15" cast frame woofer ● Compact heavy-duty, 3/4" furniture grade plywood enclosure ● Weather-resistant, dual-coat textured black finish ● 120dB sensitivity, 125dB SPL output ● 400 watt power handling capability ● Two Neutrik NL-4 Speakon connectors ● Dado “lock-tab” and rabbet joint construction ● Only 19" X 25" X 20"
Specifications
FREQUENCY RESPONSE1 POWER HANDLING
2
MAXIMUM CONTINUOUS OUTPUT
3
DISPERSION ANGLE DIRECTIVITY
SENSITIVITY
4
NOMINAL IMPEDANCE COMPONENTS
ENCLOSURE MATERIAL INPUT CONNECTIONS
DEPTH
HEIGHT
WIDTH
NET WEIGHT
SHIPPING WEIGHT FINISHES
49-300Hz±4dB, -10dB 37Hz (see graph) 400 Watts (46V) 125dB
See Graph See Graph 101dB
8 Ohms, 5.3 Ohms Minimum at 42Hz (see graph) K-48-EP 15" Woofer
3/4" Furniture Grade Plywood
Two NL-4 Speakon Connectors Wired in Parallel
19.563" (49.69cm)
18.438" (46.833cm) 24.5" (62.23cm)
62 lbs. (28.148kg) 71 lbs. (32.234kg) Black
3M, Half-space anechoic AES Standard, continuous pink noise 40Hz-10kHz, 6dB peaks 3 At 1M at power handling power input 4 SPL at 1M, half-space anechoic with 2.83V input 1 2
