Transcript
R
KUBOTA ULTRA-COMPACT EXCAVATOR
K
K008 - 3 Spacious, comfortable, and more productive, yet it fits in the tightest spaces. The K008-3 sets the standard for all ultra-compact excavators.
For more information visit gartontractor.com.
Kubota raises the bar again with the spacious K008-3 ultra-compact excavator. For sheer productivity, no other ultra-compact excavator measures up to the K008-3. By upgrading it in the essential areas of performance, durability, serviceability, and comfort, the spacious K008-3 outperforms the competitors in a wide range of construction and building work.
K008-3
Clean-running Kubota Engine
s Complie V! rI e i T h t i w
Powerful and dependable, the K008-3’s diesel engine delivers superior horsepower and performance. It offers low noise and vibration levels, exceptional fuel efficiency, and complies with the EPA’s 2013 Tier IV emissions regulations.
TPSS
Handy toolbox
TPSS is standard equipment, allowing the operator to select the most familiar operating control pattern, either ISO or SAE.
To help you perform basic maintenance, the K008-3 comes complete with a toolbox conveniently located under the operator’s seat.
Straight wall trenching
Coolant temperature gauge
Equipped with a swing angle of up to 60 degrees, the K008-3 lets you dig a straight trench along any wall.
The new coolant temperature gauge helps prevent the engine from overheating by keeping you informed. Located close to the control levers, a warning lamp lights up when the coolant temperature rises to 115 degrees, and turns off when it falls to 108 degrees or below.
Protected bucket hoses
Foldable ROPS
By running inside the dipper arm, the bucket hoses are also well protected from damage.
Rollover Protective Structure provides you with an extra measure of safety. It folds down to make easier transporting and storage of the excavator.
Improved hose and boom cylinder protection All the hydraulic hoses hidden with in the boom and dipper arm. With the boom mounted on top of the boom, the K008-3 increases service life by offering outstanding protection from damage.
With increased space in the operator’s area, you’ll get the job done faster and in comfort.
Protected auxiliary hoses By routing its auxiliary hydraulic hoses through the boom, the K008-3 no longer requires lengthy hoses when connecting your implements. Furthermore, a shorter hose length greatly reduces the risk of snagging and causing damage.
K008-3
Two-speed travel Need to make up time? Step on the K008-3’s hi-speed pedal, and you’ll maneuver around job sites faster than any other compact excavator in its class.
.2" m 14 60 m 3
Two-way lever Located within easy reach, it lets you switch between control of the blade or the adjustable track width.
Fast and easy maintenance A full-open bonnet and new engine layout makes daily inspection and maintenance of essential components a snap. Both features now provide you with easy access to the radiator, battery, coolant, fuel filter, and dual-element air-cleaner.
Comfortable operator’s seat Well padded and contoured, you’ll truly appreciate the comfort of its operator’s seat, especially during long days of operation.
" m 7.795 m 1
m
W O R K I N G
P E R F O R M A N C E
Swing bracket pin bushings
Pedal-operated boom swing
To increase life of components, swing bracket pins have bushings.
A convenient toe-heel pedal lets you easily operate both the boom swing and upper-house swivel at the same time.
Spacious operator’s area You’ll find it more comfortable behind the operating levers of the K008-3. That’s because we’ve generously increased the space between the operating levers and the operator’s seat, and lengthened the floorboards.
.6" m 13 45 m 3
2' 4" 700 mm 2' 10" 860 mm Wider working range For maximum productivity, its digging/dumping heights, digging depths, and digging radius at ground level have all been increased.
4' 6" 1,375 mm
5' 8" 1,715 mm Adjustable width track frame
Reliable Kubota E-TVCS engine Super dependable and efficient, the combustion created by our engine’s unique Three Vortex Combustion System reduces exhaust emission, noise, and vibration.
To enable passage through narrow spaces such as doorways and gates, the adjustable width track frame can reduce the K008-3’s track width down to 700 mm by simply operating a single lever. Plus, changing the blade width is as easy as removing one pin by hand.
KUBOTA ULTRA-COMPACT EXCAVATOR DIMENSIONSSPECIFICATIONS
SPECIFICATIONS SPECIFICATIONS
Operating weight 2200 (1000) Including operator’s weight 175 lbs.
" (2870)
" (2035) " (1715)
" (1375)
" (3025)
" (3075)
" (1120)
2" (955)
6"(750)
ons without tact your bota strongly and seat belt
Model
K008-3
G
Rubber
Rubber
44 (719) A
9'0" (2750)
Dimensions
7'4" (2230) B
2'10" (860) / 2'4" (700)
HP (kW)/rpm
10.3 (7.7) / 2050
Output (SAE J1349 net)
HP (kW)/rpm
10.1 (7.5) / 2050
Displacement
cu.in. (cc)
44 (719)
Overall length
ft.in. (mm)
9'0" (2750)
Overall height
ft.in. (mm)
Overall width
ft.in. (mm)
Min. ground clearance
5.9" (150)
Pump capacity
5.55 (21.0)
Hydraulic system
5.55 (21.0) 2200 (1000) 1010 (460)
Auxiliary hydraulic flow Max. breakout force
Bucket Arm
Travel speed
1695 (770)
Drive system
2'11" (900) 4'0" (1230)
8.3
Swing system
55
2'10" (860) 2'4" (700)
7.1" (180) 3.30 / 4.49 (12.5 / 17.0) 3.17 (12.0 ) 2200 (1000 )
LIFTING CAPACITY
LIFTING CAPACITY LIFTING CAPACITY 9'5" (2870) A Max. digging height ft.in. (mm) OVER-FRONT OVER-FRONT LIFT (2035) dumping height 6'8" ft.in. (mm) B Max. BLADE UP LIFT BLADE DOWN POINT unit=1000 lbs 5'8" (1715) unit=1000 lbs POINT Max. digging depth C HEIGHT ft.in. (mm) HEIGHT LIFT POINT RADIUS (ft) LIFT POINT RADIUS (ft) D Max.(ft) 4'6" (1375) vertical digging depth ft.in. (mm) (ft) 8 8 6 6 4 4 E Max. digging radius @ ground ft.in. (mm) 9'11" (3025) 6 – – 0.38 0.38 – – F Max. digging radius 10'1" (3075) ft.in. (mm) 6 4 0.39 0.24 0.44 0.39 – – (1120) 3'8" W/o swing ft.in. (mm) 4 G Min. turning 2 radius 1.02 0.40 0.23 0.56 0.36 0.67 With swing ft.in. (mm) 3'2" (955) 2 GL 0 0.37 0.23 0.58 0.34 1.04 0.61 H Min. tail turning radius 2'6"(750) ft.in. (mm) GL 0 Machine with ROPS canopy and rubber crawler, without bucket The company reserves the right to change the above specifications without notice. This brochure is for descriptive purpose only. Please contact your local Kubota dealer for warranty infomation. For your safety, Kubota strongly recommends the use of a Rollover Protective structure (ROPS) and seat belt for almost all applications.
1010 (460)
lbs. (kgf)
1.2 / 2.5 (2.0 / 4.0) 1695 (770) 2'11" (900)
ft.in. (mm)
4'0" (1230)
psi (kgf/cm2)
3.55 (0.25)
w/ROPS Bar in. (mm) 2'7" (800)
E Unit swing speed F
Boom swing angle
7.1" (180)
rpm
8.3
Left
degree
55
Right
degree
Width
in. (mm)
2'4" / 2'10" (700 / 860
Height
in. (mm)
7.9" (200)
Max. lift above ground
in. (mm)
Max. drop below ground
in. (mm)
H
7.9" (200)
2200 (1000)
Crawler length
Dimensions Blade
7.9" (200)
5.55 (21.0)
lbs. (kgf)
lbs. (kgf)
60 2'4" / 2'10" (700 / 860)
gpm. (/min)
ft.in. (mm)
Ground contact pressure
3.55 (0.25)
5.9" (150) 5.55 (21.0)
Tumbler distance Shoe width
7.1" (180)
in. (mm) gpm. (/min)
mph (km/h)
Max. traction force
D
1.2 / 2.5 (2.0 / 4.0)
7'4" (2230)
2'10" (860) / 2'4" (70
7.9" (200) 7.1" (180)
3.30 / 4.49 (12.5 / 17.
Hydraulic oil (reservoir/system)
gpm. (/min)
Fuel reservoir
gpm. (/min)
3.17 (12.0 )
lbs.(kgf)
2200 (1000 )
Operating weight Including operator’s weight 175 lbs.
2'4" (700) 2'10" (860)
WORKING WORKINGRANGE RANGE
9'5" (2870) A Max. digging height ft.in. (mm) LIFTING CAPACITY LIFTINGMax. CAPACITY LIFTING CAPACITY LIFTING CAPACITY OVER-SIDE dumping height 6'8" (2035) ft.in. (mm) B OVER-FRONT OVER-FRONT OVER-SIDE Max. digging depth 5'8" (1715) C ft.in. (mm) BLADE UP BLADEunit=1000 DOWN lbs Lift point radius unit=1000 lbs unit=1000 lbs unit=1000 lbs (1375) D Max. vertical digging depth 4'6" ft.in. (mm) LIFT POINT RADIUS (ft) LIFT POINT RADIUS (ft)Lift point LIFT POINT RADIUS (ft) LIFT POINT RADIUS (ft) E Max. digging radius @ ground ft.in. (mm) 9'11" (3025) 8 6 4 8 8 8 6 6 6 4 4 4 F Max. digging radius 10'1" (3075) ft.in. (mm) – 0.33 – – – – 0.38 0.38 0.33 – – – 3'8" (1120) W/o swing ft.in. (mm) 0.20 0.32 – G Min. 0.39 0.24 0.20 0.44 0.39turning radius 0.32 – – – With swing ft.in. (mm) 3'2" (955) 0.19 Lift point height 0.29 0.53 0.40 0.23 0.19 0.56 0.36 0.29 1.02 0.67 0.53 H Min. tail turning radius 2'6"(750) ft.in. (mm) 0.18 0.27 0.48 0.37 0.23 0.18 0.58 0.34 0.27 1.04 0.61 0.48
Machine with ROPS canopy and rubber crawler, without bucket
60
7'4" (2230)
10.1 (7.5) / 2050
Kubota D722-E4
Output (SAE J1995 gross)
5'11" (1790)
Engine
10.3 (7.7) / 2050
LIFTING LIFTING CAPACITY CAPACITY WORKING RANGE
Unit: ft. in. (mm)
Model
Kubota D722-E4
lbs.(kgf)
K008-3
H
Type of tracks
C
K008-3 Model Rubber Type of tracks Kubota D722-E4 Model 10.3 (7.7) / 2050 Output (SAE J1995 gross) HP (kW)/rpm Engine 10.1 (7.5) / 2050 Output (SAE J1349 net) HP (kW)/rpm 44 (719) cu.in. (cc) Displacement 9'0" (2750) Overall length ft.in. (mm) 7'4" (2230) Overall height ft.in. (mm) 2'10" (860)Dimensions / 2'4" (700) ft.in. (mm) Overall width 5.9" (150) in. (mm) Min. ground clearance (21.0) 5.55 Pump capacity gpm. (/min) 5.55 (21.0) gpm. (/min) Hydraulic Auxiliary hydraulic flow 2200 (1000) system Bucket lbs. (kgf) Max. breakout force 1010 (460) Arm lbs. (kgf) 1.2 / 2.5 (2.0 / 4.0) Travel speed mph (km/h) 1695 (770) Max. traction force lbs. (kgf) 2'11" (900) ft.in. (mm) Tumbler distance Drive 4'0" (1230) Crawler length system ft.in. (mm) 7.1" (180) Shoe width in. (mm) 3.55 (0.25) Ground contact pressure psi (kgf/cm2) 8.3 rpm Unit swing speed 55 Swing degree Left Boom swing angle 60 system Right degree 2'4" / 2'10" (700 / 860) in. (mm) Width Dimensions 7.9" (200) Height in. (mm) Blade 7.9" (200) Max. lift above ground in. (mm) 7.1" (180) Max. drop below ground in. (mm) (12.5 3.30 / 4.49 / 17.0) gpm. (/min) Hydraulic oil (reservoir/system) 3.17 (12.0 ) gpm. (/min) Fuel reservoir
The company reserves the right to change the above specifications without notice. This brochure is for descriptive purpose only. Please contact your local Kubota dealer for warranty infomation. For your safety, Kubota strongly Axis of rotation recommends the use of a Rollover Protective structure (ROPS) and seat belt for almost all applications.
LIFTI
LIF PO HEIG (f
GL
Machine w
K008-3 KT Hydraulic Hammer (Optional Attachment)
Foldable ROPS (Standard Attachment)
©2012 Kubota Corporation
R
KUBOTA TRACTOR CORPORATION Kubota Tractor Corporation, 3401 Del Amo Boulevard, Torrance CA 90503 Western Division: 1175 S. Guild Ave., Lodi, CA 95240 Tel (209) 334-9910 Central Division: 14855 FAA Boulevard, Fort Worth, TX 76155 Tel (817) 571-0900 Northern Division: 6300 at One Kubota Way, Groveport, OH 43125 Tel (614) 835-1100 Southeast Division: 1025 Northbrook Parkway, Suwanee, GA 30024 Tel (770) 995-8855
Visit our web site at: www.kubota.com
Cat. No.8860-01-US Printed in Japan ’14-11D. 2 0
