K-tek® Windscreens

Transcript

P R O F E S S I O N A L A U D I O P R O D U C T S SOUND WITHIN REACH K-TEK BOOM POLES DV CAMERA MOUNTS SHOCK MOUNTS & ACCESSORIES WINDSCREENS K L A S S I C B O OM PO L E S • STAG E PO L E S • AVA LO N B O OM PO L E S • S H O C K MO U N T S • M I C R O P H O N E S U P PO RT P R O D U C T S K L A S S I C B O O M P O L E S K-TEK KLASSIC BOOM POLES ® LO CAT I O N • D O C U M E N TA RY • ST U D I O The original K-Tek Klassic 5-Section Boom Poles combine thoughtful design, top-of-the-line materials and precision engineering. Available in six convenient sizes, the shortest telescopes from 1' 4" (40cm) to 4' 11" (150cm). The longest extends from only 4' 7 " (139cm) to nearly 21' (638cm). Available wired with internal cable and bottom or side connector (CC or CCR) or “Flow-through” or “Flow-through Stubby” base (FT or FTS), or unwired. K-CCR (XLR Side Exit) Superior Construction Outstanding Versatility K-Tek Poles are constructed from high-density graphite selected for maximum strength and minimum weight. Eight layers of dent-proof graphite are precision ground and then burnished to produce a low handling-noise finish. The bottom coupling allows boom operators to attach a variety of accessories. A Flow-through accessory allows an internal cable to exit without chafing. K-Tek’s proprietary Mushroom Pole Base is molded from rugged polyurethane for optimum shock protection and long life. Advanced Design Klassic Pole tops feature two sets of slots to accommodate most types of mic cables. Telescoping sections are connected with unique “captive collets” that require minimum torque. The collets are held captive within a collar studded with directional dimples designed to offer a pleasant touch and good grip under all conditions, even in extreme temperatures and humidity. K-FTS (Flow-through Stubby) 2 K L A S S I C Model K-56 K-56CC K-56CCR K-81 K-81CC K-81CCR K-102 K-102CC K-102 CCR K-102FTS K-152 K-152CC K-152CCR K-152FTS K-202 K-202CC K-202CCR K-202FT K-251 K-251FT Min. Length 1'4" (40cm) 1'4" (40cm) 1'7" (48cm) 2' (60cm) 2' (60cm) 2'3" (68cm) 2' (60cm) 2' (60cm) 2'3" (68cm) 2'3" (68cm) 3' (91cm) 3' (91cm) 3'3" (99cm) 3'3" (99cm) 3'10" (116cm) 3'10" (116cm) 4'1" (124cm) 4'3" (129cm) 4'7" (139cm) 5' (152cm) Max. Length Sections 4'11" (150cm) 4'11" (150cm) 4'11" (150cm) 6'9" (206cm) 6'9" (206cm) 6'9" (206cm) 8'9" (267cm) 8'9" (267cm) 8'9" (267cm) 8'9" (267cm) 12'8" (386cm) 12'8" (386cm) 12'8" (386cm) 12'8" (386cm) 16'10" (513cm) 16'10" (513cm) 16'10" (513cm) 16'10" (513cm) 20'11" (638cm) 20'11" (638cm) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 B O O M P O L E S 2 sets of slots accommodate most types of mic cables Weight .652 lbs. (295g) .987 lbs. (443g) 1.214 lbs. (550g) 1.280 lbs. (580g) 1.496 lbs. (678g) 1.746 lbs. (791g) 1.009 lbs. (457g) 1.292 lbs. (586g) 1.542 lbs. (699g) 1.682 lbs. (762g) 1.344 lbs. (609g) 1.649 lbs. (747g) 1.887 lbs. (855g) 1.957 lbs. (887g) 1.673 lbs. (758g) 1.836 lbs. (832g) 2.086 lbs. (946g) 2.144 lbs. (972g) 2.138 lbs. (969g) 2.409 lbs. (1092g) Captive collet Collar with directional dimples Telescoping sections Low handling-noise finish High-density graphite fiber Attach accessories to bottom coupling K-CC (XLR bottom exit) Mushroom Pole Base K-56 K-81 K-102 K-152 K-202 K-251 3 A R T I C U L A T E D B O O M P O L E S K-TEK ARTICULATED BOOM POLES ® The introduction of the K-Tek Klassic revolutionized the way that boom poles were made. The K-Tek Articulated Poles are revolutionizing the way that Boom Poles are used! Expansive Reach The KA –113 has four telescoping sections before the joint and two more after, providing a reach of nearly nine and one half feet (287 cm). Five positive locking positions provide articulation at 90, 112.5, 135, 157.5 or 180 degrees. This allows the microphone to be placed at or over the subject, over obstructions or even other poles. Single-handed Operation K-Tek’s ingenious articulated design allows the operator to comfortably hold the pole with one hand with the mushroom base at the belt line, freeing one hand to operate the mixer. The pole goes up …over … and back down to accurately position the microphone while staying outside of the frame line. Or invert the pole and the articulation allows you to go under and back up to position the microphone. A simple two-person interview can be done with the mushroom base on the floor (or operator’s toe) and the articulated section positioned over the talent. Rotating the pole moves the microphone. Model Min. Length Max. Length Sections KA-113 KA-113CCR* 2'2" (66cm) 2'5" (74cm) 9'5" (287cm) 9'5" (287cm) *CCR: internal coil cable with side exit XLR 4 6 6 Weight 1.776 lbs. (805g) 2.303 lbs. (1044g) Q U I C K C O N N E C T S T A G E P O L E S K-TEK QUICK CONNECT STAGE POLES ® Maximum Length and Stability Five sections in a pole provide a good compromise in the extended-length/collapsed-length ratio. But if collapsed length is not an issue — for example, on a large sound stage, or on location with a production that uses a two or three man crew — a four-section pole can offer significant advantages. A very long four-section pole can be extremely stiff, as the diameter of the smallest section is still considerable. The base section can be very long, providing a large unobstructed handling area. Plus, there is less chance of movement in the couplings because there are fewer of them. Quick, Hassle-Free Changes Each Stage Pole has an integrated “Quick Connect” top section with a stainless steel thread and cable slots. Furthermore the smallest graphite section has a large enough interior diameter to accept an XLR connector, so wiring in the field is fast and easy. Switching from a straight cable to a coiled cord is simply a matter of interchanging the Flow-through Foot and a Coiled Cord Adapter and dropping in the cable. Model Flow-through with straight cable Min. Length KS-124 3' 3" (99cm) KS-124-FTS* 3' 6" (118cm) KS-162 4' 1" (124cm) KS-162-FTS* 4' 4" (131cm) KS-200 4' 10" (147cm) KS-200-FT* 5' 5" (165cm) KS-247 6' (183cm) KS-247FT* 6' 7" (201cm) Max. Length Sections 10' 4" (315cm) 10' 4" (315cm) 13' 6" (412cm) 13' 6" (412cm) 16' 8" (508cm) 16' 8" (508cm) 20' 7" (627cm) 20' 7" (627cm) 4 4 4 4 4 4 4 4 Weight 1.187 lbs. (538.6g) 1.187 lbs. (538.6g) 1.437 lbs. (652g) 1.437 lbs. (652g) 1.65 lbs. (748.4g) 1.65 lbs. (748.4g) 2.062 lbs. (935.5g) 2.062 lbs. (935.5g) *FT or FTS Flow-through base with straight cable 5 K L A S S I C A C C E S S O R I E S K-TEK KLASSIC ACCESSORIES ® Customize your pole to the way you work. Klassic and Quick Connect Stage Poles feature a coupling at the bottom that allows you to attach any of the K-Tek Klassic line of accessories quickly and securely. K-CC — Base unit with XLR Male for Internal Coiled Cable The K-CC is a dimpled collar with a bottom XLR. Factory wired poles come with the K-CC installed. (Cable kits are available for all Klassic boom poles.) K-CC Model Weight K-CC .145 lbs (65g) K-CCR — Base unit with Right Angle XLR for Internal Coiled Cable The K-CCR is a 3" base where the XLR comes out the side and the mushroom base attaches to the end. With longer poles this allows the operator to rest the pole on its base between takes without damaging K-CCR the wiring. needed to allow the cable to flow into the pole while it is being extended and to flow out of the pole while it is being collapsed without binding. The K-FT Flow-through Base has a slot four inches long to allow long cables to flow smoothly. It can be used with the K-202 and K-251 Klassic poles and may be compatible with the K-152. We also offer the “Stubby” Flow-through Base (K-FTS) with a slot only 1 3/4" long. It is designed for use with the K-56 and K-102 Klassic poles and is adequate for work with the K-152 when it is desirable to keep the overall length to a minimum. Model Length Weight K-FT K-FTS 7" (18 cm) 4" (10 cm) .324 lbs (146g) .253 lbs (114g) K-Tek ® Boom Pole Extension Sections For use on any Klassic or Quick-Connect Stage pole (without internal coiled cable). K-Tek Extension Sections attach to the bottom end of the pole to give you the extra length you need for those rare cases when the job demands an expanded reach – without requiring you to carry a long pole at all times. Model Product Description Model K-EX60 K-EX50 K-EX40 K-EX30 K-EX20 Weight K-CCR .395 lbs (179g) K-FT/K-FTS — Flow-through Base for Internal Straight Cable K-FT 6 When running a straight cable inside a boom pole, a method is Extension Extension Extension Extension Extension Section Section Section Section Section 5' 4' 3' 2' 1' (152 cm) 2" (127cm) 4" (102cm) 6" (76 cm) 8" (51cm) K L A S S I C K-Tek Microphone “Quick Connect” System K-Tek “HODGES Effect” Brass Weight The K-Tek microphone Quick Connect system is designed to attach to any device using a 3/8" – 16 thread, making it universal. The K-QC quick connect unit attaches to the 3/8" stud on the end of a boom pole and is locked on with a 3/8" nut for security. The K-QC consists of the attaching section with K-QS its locknut, a dimpled collar with its collett and one 3/8" mounting spud for a microphone. A C C E S S O R I E S K-QC Each microphone support is fitted with a spud that plugs into the K-QC. These spuds are packaged in sets of three units. To get a little bit of extra reach, we also offer the K-QSL, a two inch extension spud. Model Product Description K-QC K-QS K-QSL Quick Connect Unit including one Spud Package of three Spuds for K-QC Long Spud for K-QC K-Tek Lectrosonics Adapter This adapter is a support bracket to protect a Lectrosonics transmitter when plugged into our Klassic Poles. K-LEC Lectrosonics Adapter Weight: .265 lbs (120g) Letrosonics Adapter Boom Pole manufacturers have been striving to make their products as light as possible. Generally, they have achieved a great weight reduction using carbon composite and exotic alloys. The boom operators ask … why is my rig so heavy when I use the new light weight boom poles? The entire pole, microphone, mount and cable assembly might be only four pounds but it feels like more. What the operator feels as weight is, of course, the downward moment of force of the microphone and mount at the far end of a long pole. This force can be considerable. If one could hold the pole at, or near its center of balance, it would be very easy to hold and maneuver. With the left hand as the pivot point at the balance point, the right hand can guide the microphone to its desired position effortlessly. Unfortunately, at the balance point, over half of the pole is sticking out behind. This problem is solved by the HODGES Effect Brass Weights. M. Klemme Technology Corp. manufactures finely machined brass weights that attach to the base of the K-Tek microphone boom poles. These brass weights, in 750 gram units, can be attached in combination to move the balance point of the pole/mic assembly back to a comfortable and practical point. The ideal balance point to achieve the maximum reduction in fatigue and the most precise control of the mic position, is just forward of the natural position of the pole pivot on the left hand. (This is assuming normal Hodges Effect Brass Weight “pivot on the left/control with the right” booming.) With the HODGES Effect, the total weight of the system is increased, but feels as though a great weight has been removed. Model Product Description K-HE “HODGES effect” Brass Weight Weight: 1.674 lbs (759g) 7 A V A L O N B O O M P O L E S AVALON BOOM POLES Top Quality Affordability for ENG, EFP, DV Production Crafted of the same high - density graphite fiber used in the K-Tek Klassic line or in cost-effective aluminum tubing, Avalon boom poles are designed to meet the needs of ENG and DV Camera crews. The series offers many of the same benefits of the original Klassic boom poles in an affordable package -- eliminating some deluxe features but without sacrificing any of the K-Tek quality. All poles feature the same high-reliability collars and unique “captive collet” coupling system -- telescoping sections lock in place securely and easily. Factory wired models (CC or CCR) are fitted with a high-quality coiled cord inside the pole and a sturdy male XLR receptacle conveniently mounted with a bottom exit or a side exit at the base. The first professional boom pole designed to fit into a standard equipment case, the versatile Avalon Traveler (KEG-88 or KE-79) stores quickly for easy transportation and extends to a maximum reach over 6'7". In addition to standard black, some models of the Avalon Aluminum series are now available in striking anodized red or blue. Avalon Graphite Boom Poles Model KEG-60 KEG-60CC KEG-88 KEG-88CC KEG-100 KEG-100CC KEG-100CCR KEG-150 KEG-150CC KEG-150CCR Min. Length 1' 7" (49cm) 1' 7" (49cm) 1' 11" (59cm) 1' 11" (59cm) 2' 2" (66cm) 2' 2" (66cm) 2' 5" (74cm) 3' (93cm) 3' (93cm) 3' 3" (101cm) Max. Length Sections 5' (152cm) 5' (152cm) 6' 8" (203cm) 6' 8" (203cm) 8' 9" (267cm) 8' 9" ( 267cm) 8' 9" ( 267cm) 12' 6" ( 381cm) 12' 6" ( 381cm) 12' 6" ( 381cm) 5 5 6 6 5 5 5 5 5 5 Weight 0.687 lbs (312g) 0.937 lbs (415g) 0.907 lbs (411g) 1.214 lbs (550g) .955 lbs (433g) 1.262 lbs (572g) 1.362 lbs (601g) 1.328 lbs (602g) 1.635 lbs (741g) 1.699 lbs (770g) Avalon Aluminum Boom Pole Models Model KE-69 KE-69CC KE-79 KE-79CC KE-89 KE-89CC KE-110 KE-110CC KE-110CCR 8 Min. Length 2' 4" (72cm) 2' 4" (72cm) 1' 8" (52cm) 1' 8" (52cm) 2' 5" (74cm) 2' 5" (74cm) 2' 7" (79cm) 2' 7" (79cm) 2' 10" (87cm) Max. Length Sections 5' 9" (175cm) 5' 9" (175cm) 6' 7" (201cm) 6' 7" (201cm) 7' 2" (229cm) 7' 2" (229cm) 9' 2" (279cm) 9' 2" (279cm) 9' 2" (279cm) 3 3 6 6 4 4 5 5 5 Weight .786 lbs (356g) 1.051 lbs (476g) 1.237 lbs (561g) 1.452 lbs (658g) 1.110 lbs (503g) 1.375 lbs (623g) 1.458 lbs (661g) 1.723 lbs (781g) 1.813 lbs (822g) A V A L O N B O O M P O L E S KE-79CC Aluminum poles CC CCR 9 S H O C K M O U N T S & A C C E S S O R I E S K-TEK SHOCK MOUNTS & ACCESSORIES ® K-Tek produces a rich catalogue of high-quality microphone support and protection products for the professional sound engineer and DV camera crew. But even the most flexible piece of equipment does not perform until it integrates effectively with the microphone, camera, and other equipment in use at the production set, to form a truly operational system. To help you cope with the ever changing circumstances during a shoot, K-Tek presents a complete range of accessories, most of which are compatible with third party products. K-GPS General Purpose Suspension The K-GPS is a versatile high tech 4-point suspension system featuring K-Tek’s unique K-SUS polymer suspenders spaced 3 1/5" (9cm) apart in a precision-machined aluminum frame. The result is a lightweight K-GPS shock mount designed to fit a wide range of microphones. Equipped with a swivel mount with standard 3/8" - 16 thread, the system mounts quickly to a mic stand, boom pole or any other fixture. Weight: .220 lbs (99g) K-GPSS A short version of the K-GPS General Purpose Suspension. The K-GPSS uses K-SUS polymer suspenders spaced 2" (5 cm) apart in a precision machined aluminum frame. This lightweight shock mount is optimized to fit relatively short microphones. Equipped with a swivel mount with standard 3/8" - 16 thread, it mounts easily to a boom pole or any other fixture. Weight: .195 lbs (88g) K-SUS Microphone Suspenders Made from a special polymer, K-Tek K-SUS Microphone Suspenders are a high quality replacement for rubber bands, or bands and clips in various suspension systems. K-SUS They fit most available suspension frames with a four-point mounting pattern and accept any microphone with a diameter of 20 - 40 mm. Available in pairs. Weight: 0.021 lbs (9g) K-SM Microphone Shock Mount The microphone is held firmly in two specially formulated polymer mounts attached to precision machined aluminum arms, spaced 2" (5cm) apart. The mounts stretch to accommodate most shotgun mics 19 to 25mm K-SM in diameter. The K-SM microphone Shock Mount shock mount may be used with popular windshields through the addition of the K-WA Windshield Adapter. Weight : .178 lbs (80g) K-SSM Microphone Shock Mount —Short Version Designed for short shotgun microphones, the K-SSM holds the mic firmly in two polymer mounts spaced 1 3/8" (3.5mm) apart. Weight: .172 lbs (78g) K-DA-SM — Robust Dual Angle Shock Mount Weight: .121 lbs (54g) K-DA-SSM — Robust Dual Angle ShockMount — Short Version Weight: .115 lbs (52g) 10 S H O C K M O U N T S & A C C E S S O R I E S KE-US Universal Shock Mount K-BWC Camera Adapter This lightweight, versatile suspension system uses the K-Tek K-SUS polymer suspenders in a machined aluminum frame. Standard spacing is 3 5/8" (93mm); suspenders can KE-US be user-adjusted down in steps Suspension Mount to 1 1/2" (40mm) apart to accommodate short microphones. The system’s swivel adapter with industry-standard 3/8" -- 16 thread permits easy mounting onto a boom pole, handgrip or any other support. Fits in 1.05" (25mm) camera microphone collar and adapts to 3/8" - 16 thread. Simple and versatile way to mount professional microphones to most Canon cameras. Weight: .162 lbs (73g) K-CAM-SM — Shock Mount with Camera Shoe Adapter Weight: .049 lbs (22g) K-BWJ Camera Adapter Fits in 0.85" (22mm) camera microphone collar and adapts to 3/8" -16 thread. Simple and versatile way to mount professional microphones to most JVC/Panasonic cameras. Weight: .049 lbs (22g) K-SA — Shoe Adapter for DV Cameras Weight: .034 lbs (15g) Weight: .147 lbs (66g) K-SA DV Camera Shoe Adapter K-CAM-SM Shock Mount, Shoe Adapter K-CAM-SSM — Shock Mount — Short Version with Camera Shoe Adapter K-OSE — DV Camera Offset Shoe Extender Weight: .094 lbs (42g) Weight: .138 lbs (62g) K-BWS Camera Adapter Fits in 0.98" (25mm) camera microphone collar and adapts to 3/8" -16 thread. Simple and versatile way to mount professional microphones to most Sony Broadcast cameras. K-BWJ, K-BWC, K-BWS Camera Adapters K-OSE DV Camera Offset Shoe Extender Weight: .049 lbs (22g) 11 B O O M P O L E C R A D L E K-BC Universal Boom Pole Cradle The K-Tek Boom Pole Cradle attaches to a universal grip Knuckle with a stainless steel spud. This connects to a machined aluminum I- beam shaft supporting two swiveled pole cradles. Each of the two Cradles cushions the pole on two polyurethane pads, each supporting the pole over 2 square inches, cushioning and supporting the pole over a length of 16 inches while holding it very rigidly. The pads also help isolate the pole from vibration conducted through the C-stand. K-BC Product Description K-BC Universal Boom Pole Cradle 1.032 lbs (468g) K-HG 7" (18cm) Weight: 0.2 lbs. (94g) K-ZHG Hefty Handgrip Coiled Audio Cords Available with Neutrik Male and Female XLR (NN) or Neutrik Male and K-Tek Right Angle Female XLR (NK) connectors. The K-Tek K-HG Handgrip offers an efficient and professional method to handhold the system or easily attach it to a pole or stand. Made of foamcovered graphite, this comfortable grip features a K-Tek pole head with a threaded base and weighs just 2.7 ounces. Length K-ZHG Hefty Handgrip for Zeppelin Windscreens High Quality Coiled Audio Cords K-HG Handgrip Model G R I P S Universal Boom Pole Cradle Model Weight: & Weight Model Min. Length Max. Length Weight K-36NN K-36NK K-18NN K-18NK 3' (91cm) 3' (91cm) 1.5' (46cm) 1.5' (46cm) 18' (549cm) 18' (549cm) 9' (274cm) 9' (274cm) .463 lbs (210g) .414 lbs (187g) .322 lbs (146g) .273 lbs (123g) K-HG Handgrip 2.7 oz. (76.55g) K-Tek K-HGW Wired Handgrip The K-HGW consists of a K-Tek boom pole head, six inches of K-Tek boom pole graphite covered with foam, and a male XLR connecter with two female 3/8" - 16 mounting threads. The grip is internally wired with soft-cloth-covered quiet cable fitted with the K-Tek short profile Female XLR microphone connecter. The K-HGW gives seven inches more reach and hardly weighs anything. In addition, it mechanically isolates the pole from the mount and provides K-HGW Wired Handgrip the soft cloth covered wire pig tail. Model K-HGW 12 Length 7" (18cm) Weight .414 lbs (187g) K-WA Windshield Adapter K-WA — Windshield Adapter Adapts the K-SM, K-SSM, and K-GPSS to mount inside most popular windshields. Kit includes inside adapter plate, outside adapter plate, two #10-32 mounting screws and two #4-40 bracket mounting screws. Weight: .086 lbs (39g) K-SF — Slot Filler for Sennheiser MZW 60-1Windscreen Weight: .086 lbs (39g) W I N D S C R E E N S K-TEK WINDSCREENS ® From the makers of the K-Tek® professional boom poles, this unique range of windscreens offer effective solutions for wind noise reduction and microphone protection at affordable prices. Zeppelin-no cover Zeppelin ® Windscreens Dead air is what we strive to achieve in windscreen design, and dead air is what you will find in the Zeppelin. The Zeppelin from K-Tek is a practical, user-friendly method for getting maximum shielding from wind exposure during location recording. The Zeppelin system consists of an injection molded polypropylene microphone cage, 2 rubber retaining rings with removable sonic foam end caps, XLR pig tail, and a snug-fitting faux fur High-Wind cover. We offer it in four standard sizes. The microphone is supported by K-Tek's popular General Purpose Suspension (K-GPS) or Short Shock Mount (K-SSM), which can accommodate microphones from 19-25mm in diameter. The modular Zeppelin assembles and dismantles quickly and effortlessly, for compact storage and travel, and easy replacement of parts. Once the system is installed, the microphone can be slid out of the cage at any time for use while still mounted on the K-GPS/K-SSM suspension. Options include a fleece cover and a hefty hand grip for handheld work away from a boom pole. Model Min. Length K-ZEPP-S K-ZEPP-M K-ZEPP-L K-ZEPP-XL Zeppelin – Short 11 1/4" (28.5cm) Zeppelin – Medium 13" (33cm) Zeppelin – Long 16" (40.5cm) Zeppelin – Extra Long 19" (48.3cm) Max. Length Weight .887 lbs (402g) 1.018 lbs (461g) 1.257 lbs (570g) 1.480 lbs (671g) Zeppelin with fleece cover Zeppelin with faux fur cover Zeppelin without cage 13 W I N D S C R E E N S K-TEK WINDSCREENS ® Slip-On Fuzzy Windscreen The K-Tek Slip-On Fuzzy is an excellent wind protection system for exterior recording with shotgun microphones. K-Tek’s unique design combines a traditional faux fur exterior that breaks up the wind with a tightly woven fabric backing – making the Fuzzy the only slip-on windscreen with a layer of extra protection. The system’s body of open cell foam slides smoothly over the mic head and fits snug around the microphone capsule to provide additional support and insulation. Family of Fuzzy Windscreens Model Product Description Inside Length Weight Z-FSO-T Z-FSO-XS Z-FSO-S Z-FSO-M Z-FSO-L Z-FSO-XL Slip-On Fuzzy – Tiny Slip-On Fuzzy – Extra Short Slip-On Fuzzy – Short Slip-On Fuzzy – Medium Slip-On Fuzzy – Long Slip-On Fuzzy – Extra Long 3" (8cm) 3.5" (8.89cm) 5" (13cm) 6" (15.2cm) 7" (18cm) 10.5" (27cm) .072 lbs (32g) .088 lbs (39g) .114 lbs (51g) .129 lbs (58g) .155 lbs (70g) .180 lbs (81g) K-Tek Slip-on Fleecy Windscreen The K-Tek Slip-on Fleecy Windscreen is a simple and unobtrusive solution for microphone wind protection. The windscreen features an exterior of charcoal grey fleece fitted over a body of open cell foam designed to slip easily and snugly over most popular shotgun microphones. Family of Fleecy Windscreens Model Product Description Z-FLCY-T Z-FLCY-XS Z-FLCY-S Z-FLCY-M Z-FLCY-L Z-FLCY-XL Fleecy – Tiny Fleecy – Extra Short Fleecy – Short Fleecy – Medium Fleecy – Long Fleecy – Extra Long 14 Length 3" (7.62cm) 3.5" (8.89cm) 5" (12.7cm) 6" (15.2cm) 7" (18cm) 10.5" (27cm) Weight .047 lbs (21g) .057 lbs (26g) .075 lbs (34g) .083 lbs (38g) .094 lbs (43g) .117 lbs (53g) W I N D S C R E E N S K-Tek Combination Shock Mount/ Fuzzy Windscreen The K-Tek Combination Shock Mount/Fuzzy Windscreen offers the simplest and most convenient solution for wind noise reduction and microphone protection during exterior recording. The windscreen features an outer layer of synthetic fur backed Z-CAM-FZ-M with a lining of tightly - woven fabric and a body of open cell foam that fits snug around the microphone capsule. The shock mount is based on the popular K-Tek K-SM, which employs a holder of specially formulated rubber attached to arms of lightweight, durable anodized aluminum. Created to be “one size fits most,” the grip accommodates microphones ranging from 17 to 25mm in diameter. Once the microphone is firmly in place, a swivel adapter with industry-standard 3/8" - 16 thread enables easy mounting of the complete assembly onto any boom pole, handgrip or other support. The system can also be ordered with a shoe adapter instead of a thread for direct mounting onto a camera. Model Product Description Length Z-FZ-S Z-FZ-M Z-FZ-L Z-FZ-XL Combo Shock Mount/Fuzzy – Short Combo Shock Mount/Fuzzy – Medium Combo Shock Mount/Fuzzy – Long Combo Shock Mount/Fuzzy – Extra Long 7.5" (19 cm) 10" (25 cm) 12" (30 cm) 14" (36 cm) .306 lbs (138g) .332 lbs (150g) .375 lbs (170g) .418 lbs (190g) Z-CAM-FZ-S Z-CAM-FZ-M Z-CAM-FZ-L Z-CAM-FZ-XL Combo Shoe Mount/Fuzzy – Short Combo Shoe Mount/Fuzzy – Medium Combo Shoe Mount/Fuzzy – Long Combo Shoe Mount/Fuzzy – Extra Long 7.5" (19 cm) 10" (25 cm) 12" (30 cm) 14" (36 cm) .275 lbs (124g) .306 lbs (138g) .343 lbs (155g) .380 lbs (172g) Z-FZ-M Weight K-Tek Topper Windscreen for Handheld Microphones The new Topper by K-Tek is a wind protection system designed specifically for handheld microphones. Featuring an exterior of black fleece lined with tightly woven fabric, or with the traditional faux fur (black short hair) cover, tailored to fit snugly over standard foam covers. Great for popular microphones like the EV-RE-50 and Sennheiser MD46. Model Product Description K-TPR-FF K-TPR-FL Topper – Faux Fur Topper – Fleecy Weight Topper Windscreens for handheld mics .051 lbs (23g) .026 lbs (12g) 15 P R O F E S S I O N A L A U D I O P K-Tek received a 1998 Academy of Motion Picture Arts and Sciences Technical Achievement Award: To Manfred N. Klemme for the design and development of the K-Tek Microphone Boom Pole and accessories for on-set motion picture sound recording. “The K-Tek series microphone boom pole provides production recording personnel with a self-lubricated, light-weight, sturdy pole with multiple accessories.” © A.M.P.A.S.®, 1998 m.klemme technology, corp. 1384-F Poinsettia Ave. Vista, CA 92081 Phone: 760-727-0593 Fax: 760-727-0693 email: [email protected] www.ktekboompoles.com R O D U C T S