Transcript
K 50/100 Network Camera Server
Your Web Browser is Your Remote Eye !
TCP/IP based Remote Digital video monitoring and surveillance
K 50/100 is a stand-alone network camera server with built-in CCD camera which delivers crisp real time live videos at a rate up to 30fps over the existing network such as telephone line, LAN, Cable modem, xDSL. K 50/100 is designed to work with more than 1 built-in CCD camera and have external video port to easily extend number of viewing site through single network camera server. K 50/100 provide interface to control PTZ or Alarm In/Output through web browser and has more features such as FTP and e-mail larm notification.
Key Features ∎ Pure WEB Based monitoring solution User only need standard web browser to view live video stream on any O/S such as Window, Max, Linux, Unix and OS2. ∎ All-in-one solution Has Built-in High quality CCD Camera and Web server are integrated in the camera server. No need extra device to view live video stream anytime anywhere through web browser. ∎ External video input Has external video interface to extend your viewing site through sigle camera server. 3 external video input (FW-100) & 1external video input (FW-50). ∎ Easy to record and play back Freely downloadable FW-Voyager software enables you to record live Video stream while your are viewing and play back archived video through web ∎ Remote System management All the system configuration and upgrade can remotely be done over the TCP/IP network
W-50 Rear View
Kuhn S.A. se reserva el derecho de cambiar este documento sin previo aviso. Tel.: 56 2 738 5028
www.kuhn.cl
W-100 Rear View
Your Web Browser is Your Remote Eye !
System Specification Hardware · 32bit RISC CPU · Hardware Motion JPEG engine · Flash Memory: 2Mbytes · SDRAM: 16Mbytes
LAN interface · 10/100BaseT ethernet auto sensing
Network Protocols · HTTP, TCP/IP, FTP, Telnet, ARP, RARP, PPP, PAP, CHAP, JAVA, DHCP, e-mail, etc.
Security Function · password protected server access · IP Filtering (IP restriction) · Image Encryption
Image Compression & Quality · Compression algorithm: Real-time · MJPEG Compression rate: Max 30fps · Image quality: 5 levels
Service · E-mailing by event · FTP function by time schedule & event · Auto dial-out by time schedule & event · Dial-in function via PSTN modem · Dynamic IP support through AOIP
CCD Camera Module · 1/3” 410K pixels Sony CCD, (FW-100) · 1/3” 270K pixels Sony CCD (FW-50) · Lens Mount : C/CS mount (6mm lens) · Sensitivity : Min. 1 Lux · Auto Iris : Electric Shutter Video Resolution · NTSC: 704x480,704x240,352x240,176x112 · PAL: 704x576,704x288,352x288,176x144 Video Format · NTSC/PAL Video format support Performance · Max Up to 30 FPS(NTSC)/25FPS(PAL) Management · Configurable by serial or LAN port · Remote Flash memory update via Telnet
Serial Interface · RS-232 for console or modem
PTZ(Pan/Tilt/Zoom) Control · RS232, RS-485 bus for multiple PTZ device or UART Device control · Panasonic CS-WV 854,Pelco Spectra dome II and “p” protocol, Sony EVID30,Kalatel and AD Delta dome, Vicon 1311RB are currently supported and other PTZ device will be supported further. Alarm I/O interface · 2 Opto-coupled inputs · 1 Relay output
External Video-in & output · 3External video input (FW-100) · 1External video inpt (FW-50) & · 1 loopthrough Output Dimension · 10”(L) x 3.94”(W) x 2.36”(H) · 255mm(L) x 100mm(W) x 60mm (H) · Weight:0.92lbs(417g) w/o PWR supply PWR Supply · DC 12 Volt, 1.5Am, SMPS Operating temp · 40° ~ 125°F (5° ~ 50°C) Approval · FCC : Class A · CE : Class B Accessories · Console cable for system set up · Test Lan Cable · RJ-45 for Alarm sensor interface · Tripod stands for camera fix. · CD for User Guide, Installation wizard & Technical note · Quick Installation guide Miscellaneous · Java script (Ver 1.1) mode · Sensor notification service · Pure HTTP based network camera
Easy Access · Internet Explorer 4.0 or higher · Netscape 4.0 or higher · No plug-in S/W for the monitoring
· Push streaming · Developer support program · Work with FW-Manager · Dynamic IP support through AOIP · AVI conversion tool support by FWvoyager
Application
Network Diagram
Main application of this device is to monitor remote facility over the TCP/IP network . Only indoor use is recommended. ∎ Home security ∎ Small to Large sized facility monitoring ∎ Unmanned facility monitoring ∎ Building Automation ∎ Access control
Kuhn S.A. se reserva el derecho de cambiar este documento sin previo aviso Tel.: 56 2 738 5028
www.kuhn.cl
