Transcript
Kappa Series ®
Multielement loudspeakers
Maximum power from any amp or head unit
Highlights
All you ask for from a car loudspeaker is maximum power with minimum distortion? Then Infinity Kappa speakers are for you. Each multielement loudspeaker operates on reduced impedance to draw maximum power from any source, old or new. The Kappa Series feature an innovative motor design that reduces distortion for cleaner bass at any listening level, along with a UniPivot (patent no. 6,002,780) edge-driven MMD (Metal Matrix Diaphragm ) tweeter for HF response to 25kHz while a high-quality, preconnected crossover simplifies the installation. ®
®
TM
®
TM
• Ultrawideband UHF tweeter • Tweeter-level control switch • Low-distortion woofer motor • High-efficiency design • Separate high-quality crossover networks
Kappa Series ®
Multielement loudspeakers Features
• New design featuring a matte black grille with real cloth mesh and elegant chrome finish inlay and logo • Ultra-wideband UHF soft dome tweeter for accurate music reproduction up to 30kHz on the 693.9i three-way model • Edge-driven MMD tweeters for all new Kappa multielement speakers have been tuned for maximum linearity and soft roll-off at 25kHz. Tweeter level can be adjusted by the simple touch of a button • New ceramic woofer motor with a much longer voice coil for drastically reduced distortion at high listening levels (up to 15dB less!), resulting in a much tighter and better sounding bass • Separate crossover network dongles with easily accessible tweeter-level control switch on all models • High-quality screw-down terminals on all models connect perfectly with all kinds of speaker wires • 2 Ohm design, combined with proprietary PlusOne lightweight, woven-glass-fiber woofer cones, makes these Kappa speakers extremely efficient and also ensures full compatibility with standard head units ®
®
Specifications K42.9i
K52.9i
K62.9i
K652.9i
K693.9i
Size
100mm
130mm
160mm/170mm
165mm
6" x 9"
Type
2-Way Coaxial
2-Way Coaxial
2-Way Coaxial
2-Way Coaxial
3-Way Coaxial
Power Handling – RMS
50W
55W
75W
75W
110W
Power Handling – Peak
150W
165W
225W
225W
330W
75Hz – 25kHz
55Hz – 25kHz
45Hz – 25kHz
45Hz – 25kHz
35Hz – 30kHz
93dB
94dB
95dB
95dB
96dB
2 Ohms
2 Ohms
2 Ohms
2 Ohms
2 Ohms
Direct-Connect Crossover Dongle
Yes
Yes
Yes
Yes
Yes
Outboard Crossover
No
No
No
No
No
UniPivot Rotating Tweeter
No
Yes
Yes
Yes
No
Wideband UHF Tweeter
No
No
No
No
Yes
Tweeter-Level Control (0/-6dB)
No
No
No
No
No
Tweeter-Level Control (0/-3dB)
No
Yes
Yes
Yes
Yes
Tweeter Protection (PTC)
No
No
No
No
Yes
Frequency Response Sensitivity (@ 2,83V, 1m) Nominal Impedance
TM
Harman Consumer Group, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.infinitysystems.com
© 2008 Harman International Industries, Incorporated. All rights reserved. Infinity, Kappa, PlusOne (patent pending) and MMD are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Metal Matrix Diaphragm and UniPivot are trademarks of Harman International Industries, Incorporated. Features, specifications and appearance are subject to change without notice.