Transcript
TITANIUM DRIVER D2500Ti-Nd The D2500Ti-Nd model is an ultra high quality compression driver for professional use wherever high SPL and low distortion are of great concern. Pure titanium specially designed diaphragm with IPF® (Impregnated Polymer Fiber) surround, has structured type snow flake for high sensitivity, low distortion and smooth extended frequency response applications. The D2500Ti-Nd is recommended for use in arenas, stage monitors, side fills and sound reinforcement systems. Injected phase plug in engineering plastic, optimized to eliminate undesirable phase cancellation problems. High flux density magnetic assembly with Neodymium ring and aluminium shorting ring that lowers distortion and reduces the voice coil self-inductance. Voice coil manufactured in CCAW (copper clad aluminum wire) uses a high temperature Polyimide former. Precisely engineered diaphragm structure and alignment mechanism allow for easy, reliable and cost effective repair in case of diaphragm failure (RPD 220Ti). In the rare case a repair may be necessary, please read carefully the instructions supplied and be sure to correctly follow the items step by step. Model D2500 Ti Nd uses standard 1 3/8” screw - 18 threads per inches,for better with Selenium horns.
OBS.: In order to change the repair easily, ANY KIND OF CONNECTION THAT YOU WISH TO USE SHOULDN’T WELDED AT D200 TERMINAL’S DRIVER. This will cause the loose of the product’s warranty. Selenium engineers suggest to use the faston connectors supplied.
SPECIFICATIONS Nominal impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Minimum impedance @ 5,500 Hz . . . . . . . . . . . . . . . . . . . . 6.98
DRIVER x HORN CONNECTION
HL14-25
W W
POWER USING CROSSOVER (12dB/oct) ACTIVE PASSIVE AES (HPF 1.5 kHz)5 . . . . . . . . . . . . . . . . . . . . . . . . . . 23 . . . . . . . .-- W 5 AES (HPF 2 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 . . . . . . . .-- W MUSICAL PORGRAM (HPF 1.5 kHz)1 . . . . . . . . . . . . 46. . . . . .120 W MUSICAL PROGRAM (HPF 2 kHz)1 . . . . . . . . . . . . . . 54. . . . . .160 W Sensitivity On horn, 2.83V@1m, on axis2 . . . . . . . . . . . . . . . . . . . 111 dB SPL On plane-wave tube, 0.0894V3 . . . . . . . . . . . . . . . . . . 116 dB SPL Frequency response @ -6 dB . . . . . . . . . . . . . . 1,000 to 22,000 Hz Throat diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 (1) mm (in) Diaphragm material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Titanium Voice coil diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 (1.7) mm (in) Re . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 W Flux density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.80 T Minimum recommended crossover (12 dB / oct) . . . . . . . 1,500 Hz
HM25-25
D2500Ti-Nd
HM17-25
1 Power handling specifications refer to normal speech and/or music program material, reproduced by an amplifier producing no more than 5% distortion. Power is calculated as true RMS voltage squared divided by the nominal impedance of the loudspeaker. This voltage is measured at the input of the recommended passive crossover when placed between the power amplifier and loudspeaker. Musical Program= 2 x W RMS. 2 Measured with HL14-50 horn, 1,000 - 20,000 Hz average. 3 The sensitivity represents the SPL in a 25 mm terminated tube, 800 - 2,000 Hz average. 5 Test with duration of 2h with pink noise (from 6dB crest factor) and filtered a decade of often-cut.
ADDITIONAL INFORMATION Magnet material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Neodymium Magnet weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115(4.05) g (oz) Magnet diameter x depth . . . . . . . . . . . . . . 80 x 5 (3.15 x 0.19) mm (in) Magnetic assembly weight . . . . . . . . . . . . . . . . . . . . 650(1.43) g (lb) Housing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum Voice coil material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CCAW Voice coil former material . . . . . . . . . . . . . . . . . . . . . . . . . Polyimide (Kapton®) Voice coil winding length. . . . . . . . . . . . . . . . . . . . . . . 2.6 (8.53) m (ft) Voice coil winding depth . . . . . . . . . . . . . . . . . . . . . . 2.7 (0.106) mm (in) Wire temperature coefficient of resistance (a25) . . . . . 0.00404 1/°C Volume displaced by driver . . . . . . . . . . . . . . . . . 0.2(0.00706) l (ft3) Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 730 (1.6) g (lb) Gross weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760(1.7) g (lb) Carton dimensions (W x D x H) . . . . . . . . . . . . 9x9x9 (3.5x 3.5x3.5)
HM11-25
80,0
56,4
cm (in)
MOUNTING INFORMATION Horn connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Screw-on 13/8” - 18 TPI Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Faston Polarity. . . . . . . . . . . . . . . . . Positive voltage applied to the positive terminal (red) gives diaphragm motion toward the throat
Ø 25,0
37,9
18,6
Dimensões Dimensionsem in mm.
TITANIUM DRIVER D2500Ti-Nd HARMONIC DISTORTION CURVES W/ HL14-25 HORN, 7.5 W / 1 m.
RESPONSE AND IMPEDANCE CURVES W/ HL14-25 HORN INSIDE AN ANECHOIC CHAMBER, 1 W / 1 m
110
20
100
15
140
120
dB 90
10
80
5
dB
25
ohms
120
100
80
70
60
0 500
200
1k
2k Hz
5k
10k
Response Curve. Impedance Curve.
B
500
200
20k
1k
2k Hz
5k
10k
Response Curve. Distortion Curve, 2nd harmonic. Distortion Curve, 3rd harmonic.
K
20k B
K
RESPONSE AND IMPEDANCE CURVES W/ PLANE-WAVE TUBE, 1 mW 1W 1mW 150 120
25
140 110
20
POLAR RESPONSE CURVES 1 kHz 30°
90
10
120
110
80
0 500
200
1k
2k Hz
5k
10k
Response Curve. Impedance Curve.
K
Frequency response and impedance curves measured with 50 mm terminated plane-wave tube, with sensitivity referenced to a 25 mm tube.
0 -6
330°
30° 300°
240° 180°
270°
240°
120°
210°
210°
0 -6
150°
180°
210°
330°
-10
60°
300°
-20 dB
270° 90°
120° 150°
300°
16 kHz
-20 dB
90°
180°
330°
-20 dB
270° 90°
240° 150°
0 -6 -10
60°
300°
120°
210°
-10
60°
4 kHz 30°
330°
-20 dB
8 kHz
20k B
180°
0 -6 -10
60°
90°
240° 150°
5
70
300°
120°
30°
100
30°
-20 dB
90°
ohms
15
2 kHz 330°
-10
60°
130 100
0 -6
D3500Ti-Nd driver coupled to a HL14-50 horn.
270°
240°
120° 150°
180°
210°
Polar Response Curve.
HARMONIC DISTORTION CURVES W/ HL14-25 HORN, 1 W / 1 m. 120
HOW TO CHOOSE THE RIGHT AMPLIFIER The power amplifier must be able to supply twice the RMS driver power. This 3 dB headroom is necessary to handle the peaks that are common to musical programs. When the amplifier clips those peaks, high distortion arises and this may damage the transducer due to excessive heat. The use of compressors is a good practice to reduce music dynamics to safe levels.
dB
100
80
FINDING VOICE COIL TEMPERATURE It is very important to avoid maximum voice coil temperature. Since moving coil resistance (RE) varies with temperature according to a well known law, we can calculate the temperature inside the voice coil by measuring the voice coil DC resistance:
60
æR öæ 1 TB = TA + çç B - 1÷÷ çç TA - 25 + a 25 è RA øè
40 500
200
1k
2k
Response Curve. Distortion Curve, 2nd harmonic. Distortion Curve, 3rd harmonic.
5k
10k
20k K
ö ÷÷ ø
TA , TB= voice coil temperatures in °C. RA , RB= voice coil resistances at temperatures TA and TB, respectively. a25= voice coil wire temperature coefficient at 25 °C.
®
DPD (Driver Protection Device): Selenium trademark. IPF® (Impregnated Polymer Fiber): Selenium trademark.
www.selenium.com.br Specifications subject to change without prior notice. Cod.: NA
Rev.: 04 - 07 /10
www.seleniumloudspeakers.com
