Preview only show first 10 pages with watermark. For full document please download

Kbs20ktm

   EMBED


Share

Transcript

Three phase input - single phase output UPS, without batteries, 20KVA. 1 of 2 http://www.kert.it/PrintProduct.aspx?Sku=KBS20KTM Three phase input - single phase output UPS, without batteries, 20KVA. KBS20KTM Features Capacity (VA): 20000,00 Features Power (W): 16000,00 Wave form: Sine wave Input Thd (%): 3,00 Input voltage: 400,00 -20÷10% Vac Frequency (Hz): 50 Input current (A): 23,00 Technology: On-Line Efficiency (%): 92,00 Power dissipation (W): 1390,00 Output Output protections: Output voltage: 230,00 ± 1% Vac Overload - Short-cirucit - Overtemperature Frequency (Hz): 50 same as input Alerts: Connections Input: Terminal board Output: Terminal board Suggested applications: Installation: On floor Dimensions Dimensions (mm): W 450,00 x H 1200,00 x D 650,00 Weight (kg): 100,00 Standards: Back-up operation - By-pass activated - By-pass failure - Battery output sensed - Battery exhausted - Battery to be replaced Overtemperature - Overload - Short-circuit - Wrong input phases sequence - Battery test in progres - Output voltage out of range Abnormal inverter condition - Battery charger failure - Inverter voltage out of range - Abnormal operation - Fault Remote control functions: EPO - Abnormal operation - Fault - Dry contact for by-pass activated - Dry contact for emergency mode - Dry contact for abnormal inverter condition - Dry contact for by-pass failure - Dry contact for battery exhausted - Dry contact for output voltage out of range - Dry contact for abnormal rectifier condition Signaling: Acoustic signaling - LCD display Measuring instruments: Digital multimeter 2006/95/EC Directive Battery tipe: Sealed lead acid, maintenance free batteries 2004/108/EC Directive Audible noise (dB/m): 60at 1 CEI EN 62040-1-1 IP rating: IP20 19/06/2014 08:59 Three phase input - single phase output UPS, without batteries, 20KVA. 2 of 2 http://www.kert.it/PrintProduct.aspx?Sku=KBS20KTM CEI EN 62040-2 Cooling: Forced air convection CEI EN 62040-3 Working temperature (°C): 0 - 40 CEI EN 50272-2 Relative humidity (%): 0 - 95 19/06/2014 08:59