Transcript
1/3” Color 10M IR Day & Night CCD Camera
KCKC-7842 Dimensions (Unit: mm)
Features
SONY Super HAD CCD+ SONY DSP
Auto BLC(Back Light Compensation) function
420 TVL
Auto AES(Auto Electronic Shutter) function
10M IR Design
Auto AGC(Auto Gain Control) function
IP 66 Waterproof
DC12V
; Low power consumption Design
Specifications Sensor Chip Picture Element Scanning Frequency High Resolution Sensitivity Infrared Ray LED Infrared Ray Distance IR Wavelength Water Resistant Synchronizing System
1/3” SONY Super HAD CCD / SONY DSP NTSC: 510 (H) × 492 (V)
PAL: 500 (H) × 582 (V)
NTSC:15734Hz(H) 60Hz(V)
PAL:15625Hz(H) 50Hz(V) 420 TV lines
Color mode automatically switches to B/W mode under 5 Lux 0.1 Lux (IR OFF) ; 0 Lux (IR ON ) 12 pcs 10 Meters 850 nm IP 66 Internal Sync., 2:1 Interlace
Auto White Balance
AUTO
Auto Gain Control
AUTO
Backlight Compensation
AUTO
S/N Ratio Gamma Compensation Electronic Shutter Video Output
More than 48dB (AGC OFF) 0.45 Auto【 1/60(50)~1/110,000】 1.0Vp-p75Ω
Specifications 6mm Standard Board Lens (3.6, 4, 8, 12mm Optional)
Lens Mount Power Requirement
DC 12V / 260 mA (IR ON)
Dimension / Weight
53(Ø) x 86.8(H) mm ; 500g －10℃～＋50 ℃
Operating Temperature
Installation Installation Procedure
STEP 1: The IR camera base can install on ceiling, wall … Using the screws to mounting the bracket on the right position.
STEP 2: Assembly the camera with the bracket. Complete installation.
STEP 3:
(Important)
Connect the power supply of DC12V / 400mA Stable voltage adaptor.
