Transcript
Rev 0 – Aug 2012
KD-CATHD300 Key Digital®, led by digital video pioneer Mike Tsinberg,
HDBT/HDMI/DVI via Single CAT6/STP (TX/RX) Baluns with EDID Control, RS-232, IR
develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is important. Key Digital® is at the forefront of the video industry for Home
Setup Guide
Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers.
Key Digital® Systems :: 521 East 3rd Street :: Mount Vernon, NY 10553 Phone : 914.667.9700
Fax : 914.668.8666
KD-CATHD300_Manual.indd 2-3
The Experts in Digital Video Technology and Solutions™
Web : www.keydigital.com
8/29/12 4:48 PM
4
1
Table of Contents
About KD-CATHD300 Description
About KD-CATHD300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Application Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
½½ The FatCAT Series™ KD-CATHD300 allows extension of 1080p/60, 1920x1200, 3D & 4K signals up to 250 ft. when using Key Digital® Super CAT6 Shielded Cabling (Model # KD-CAT6STP1X) or up to 200 ft. when using third-party CAT6/STP cabling. KD-CATHD300 carries IR and RS-232 for controlling remotely located equipment.
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Key Features
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
½½ Auto-adjustment of feedback, equalization and amplification depending on the length of cabling used ½½ Internal EDID Library features 9 default EDID configurations including native EDID data from any Output/Display ½½ Features both Transmit and Receive IR, RS-232 for bi-directional control signals ½½ Full support for 12-Bit Deep Color Video ½½ Supports lossless compressed digital audio:
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Extending IR and RS-232 Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Important Product Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 How to Contact Key Digital® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
»» Dolby® TrueHD, Dolby® Digital Plus and DTS™-HD Master Audio Key Benefits ½½ HDMI/DVI, IR and RS-232 signals combined over a single CAT6/STP ½½ Daisy chaining of Tx and Rx units allow allows almost unlimited extension of HDMI/DVI, RS-232 and IR signals ½½ Supports HDBaseT® Technology Advanced HDMI® Features ½½ 3D – Capability to pass 3D stereoscopic signal formats CAT6/STP cabling is required. All included specifications are based on the use of CAT6 STP with properly shielded RJ45 connectors You MUST use the Power Supply provided with your unit or you VOID the Key Digital® Warranty and risk damage to your unit and associated equipment.
½½ 4K – 4096x2160/24 video resolution support for commercial applications such as Digital Movie Theaters, CAD, Post Production, Graphics and etc.
Accessories ½½ (2) 5V 2A DC Power Supplies
� (2) Mounting Brackets
½½ (2) Locking HDMI Cable Clips
� (1) Grounding Wire
Please read all instructions to insure safe operation of the product. © 2012 Key Digital, Inc. All rights reserved.
KD-CATHD300_Manual.indd 1
8/29/12 4:48 PM
2
3
Connections Before making any connections, power off your source and display devices.
Tx Balun:
Rx Balun: ½½ Using a short HDMI cable, connect your display device to the HDMI port labeled “HDMI Output”.
½½ Using a short HDMI cable, connect your source device to the HDMI port labeled “HDMI Input”. To connect DVI use appropriate DVI to HDMI adapters.
½½ Connect the CAT6 STP cable to the Tx Balun at the port labeled “CAT6 STP Input”. ½½ Connect the CAT6 STP to the Rx Balun at the port labeled “CAT6 STP Output”.
½½ If you are using IR, connect it at this time. ½½ If desired, you can connect IR signals to either send (port labeled Tx) or receive (port labeled Rx) at this time. ½½ If you are using RS-232, connect to the RS-232 port.
½½ You may connect an RS-232 cable to the DB9 port to transmit RS-232 control signals. ½½ Power up the Baluns using the included power supplies and then power up your source and display equipment.
KD-CATHD300_Manual.indd 3
8/29/12 4:48 PM
4
5
Extending IR and RS-232 Control ½½ RS-232
»» You can use the KD-CATHD300 to send RS-232 commands for controlling remote equipment. »» Requires the use of a null-modem cable on one (either) side. ½½ IR
Application Example Blu-Ray Blu-Ray
HDMI/DVI* HDMI/DVI*
IR Emitter Emitter IR
CAT6/STP CAT6/STP
KD-CATHD300TX KD-CATHD300TX
IR Tx Tx IR
IR IR Receiver Receiver (to control control TV) TV) (to
»» You may transmit IR information in either direction. The IR input can be from a dedicated control system or a standard distribution block’s emitter outputs. Use a fixed 5v input signal with a 3.5mm mono mini jack. »» The sleeve of the 3.5mm Male connector must have good physical contact with 3.5 mm Female input/output on the KD-CATHD300. »» Some 3.5mm Male plugs feature a plastic sleeve that extends longer than an average sleeve. This may cause poor grounding contact. See the example to the right of a sleeve that may cause poor contact.
CAT6/STP CAT6/STP HDMI/DVI* HDMI/DVI*
IR Rx Rx IR
TV Remote Remote TV
IR IR
KD-IRKIT300 KD-IRKIT300
Up to to 250’ 250’ –– with with Key Key Digital Digital®® KD-CAT6STP1X KD-CAT6STP1X Up Up to to 200’ 200’ –– with with 3rd 3rd Party Party CAT6/STP CAT6/STP Up
Display Display HDMI HDMI
CAT6/STP CAT6/STP
KD-CATHD300RX KD-CATHD300RX
IR Emitter Emitter IR IR IR Tx Tx
HDMI HDMI
IR IR Receiver Receiver (to control control DVD) DVD) (to
KD-IRKIT300 KD-IRKIT300 IR Rx Rx IR
Blu Ray Ray Remote Remote Blu
Daisy Chain Example: Blu-Ray Blu-Ray
KD-CATHD300TX KD-CATHD300TX HDMI HDMI
20’ 20’
Achieved Distance: Distance: up up to to 560’ 560’ Achieved
CAT6/STP CAT6/STP
Up to to 250’ 250’ –– with with Key Key Digital Digital®® KD-CAT6STP1X KD-CAT6STP1X Up Up to to 200’ 200’ –– with with 3rd 3rd Party Party CAT6/STP CAT6/STP Up
KD-CATHD300RX KD-CATHD300RX
Display Display
KD-CATHD300TX KD-CATHD300TX
KD-CATHD300RX KD-CATHD300RX
20’ 20’
CAT6/STP CAT6/STP
20’ 20’
HDMI HDMI
HDMI HDMI
KD-CATHD300_Manual.indd 4-5
8/29/12 4:48 PM
6
7
Settings EDID Control EDID settings may be necessary when connecting to or from an AV Receiver, or for passing 3D content derived from a Cable or Satellite source. They can also speed up the switching process from Cable or Satellite. The possible EDID settings can range from ‘0’ to ‘9’. (‘0’ is the default). 0
EDID from connected display
1
1080i w/ PCM 2ch Digital Audio
2
1080i w/ HD Audio
3
1080p w/ PCM 2ch Digital Audio
4
1080p w/ HD Audio
5
3D w/ PCM 2ch Digital Audio
6
3D w/ Dolby Audio
7
3D w/ HD Audio
8
DVI 1080p
9
DVI 1080p with Forced HPD
When selecting an EDID from the library, your source device will see the KDCATHD300 EDID choice instead of the displays EDID, overriding the display’s EDID information. If your display is not capable of accepting the video resolution or audio type selected, you may not see a picture or hear sound. In this case please choose another more compatible EDID, or use the default EDID.
Range and Resolution: ½½ KD-CATHD300 w/ KD-CAT6STP1X Super CAT6 Shielded cabling: All resolutions up to 1080p, 1920x1200, 3D, 4K up to 250 ft. ½½ KD-CATHD300 w/ Third-Party CAT6/STP cabling: All resolutions up to 1080p, 1920x1200, 3D, 4K up to 200 ft.
Rotary EDID Control Switch
The EDID controls are located on the Tx Balun. To change EDID settings, use a small flat bladed screwdriver to turn the rotary switch to the desired EDID setting. The switch clicks at each position to ensure the arrow is pointing at a number and not in-between. There is no need to power the unit off when adjusting the EDID settings. The unit will automatically renegotiate the new handshake in a few seconds. Please follow this procedure for subsequent EDID changes.
NOTE: Use metal shielded RJ45 connectors with soldered ground wires when terminating the CAT6 STP.
Firmware Updates: The KD-CATHD300 Tx and Rx have an “Upgrade Mode” switch located near the RS-232 port. The 2 position slide switch is marked “Normal” and “Program”. This switch should only be used in the “Program” position when updating the unit’s firmware. Be sure the switch is in the “Normal” mode for standard operation.
Specifications Technical: ½½ Inputs Tx (Each): 1 HDMI/DVI, 1 Serial IR Rx, 1 RS-232, ½½ Outputs Tx (Each): 1 CAT6 STP, 1 Serial IR Tx ½½ Inputs Rx (Each): 1 CAT6 STP, 1 Serial IR Rx ½½ Outputs Rx (Each): 1 HDMI/DVI, 1 Serial IR Tx, 1 RS-232
KD-CATHD300_Manual.indd 6-7
8/29/12 4:48 PM
8
½½ HDMI® and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP techologies ½½ KD-CATHD300 Link and Range: 1080p/60, 1920x1200, 1080i/60, 720p, 1080p/24; up to 250 ft. when used with KD-CAT6STP1X cabling, 200 ft. when used with third-party CAT6/STP cabling. ½½ Lossless Compressed Digital Audio Support: Dolby® TrueHD, Dolby® Digital Plus and DTS™-HD Master Audio ½½ DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL) ½½ HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p ½½ HDMI Connector: Type A, 19 Pin Female
9
Important Product Warnings: 1. Connect all cables before providing power to the unit. 2. Test for proper operation before securing unit behind walls or in hard to access spaces. 3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts or sheet-rock anchors.
Safety Instructions:
½½ RJ45 Connector: Shielded Link Connector
Please be sure to follow these instructions for safe operation of your unit.
½½ IR Connector: 3.5 mm monaural mini jack
1. Read and follow all instructions.
½½ RS-232 Connector: D-Sub 9 Pin
2. Heed all warnings.
½½ I2C Communication: EDID and HDCP bi-directional transparency from Display to Source
4. Do not use this device near water.
½½ CEC Support: To the main input and output HDMI channel.
6. Install in accordance with the manufacturer’s instructions.
General
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
½½ Regulation: CE, RoHS, WEEE ½½ Enclosure: Black Metal ½½ Product Dimensions (Each): L = 6” W = 4.1” H = 1.2” ½½ Shipping Carton Dimensions: L = 7.48” W = 6.54” H = 5.2” ½½ Product Weight (Each): 1 lb ½½ Shipping Weight: 3 lbs ½½ Power: UL Certified Power Supply – 5V / 2A, 110-240 VAC, 50-60 Hz ½½ Power Consumption: Tx - 2.5 Watts, Rx - 5 Watts ½½ Accessories: (2) Mounting Brackets, (2) Locking HDMI Cable Clips, (1) Grounding Wire, (2) 5V 2A DC Power Supplies
KD-CATHD300_Manual.indd 8-9
5. Clean only with dry cloth.
8. Only use attachments/accessories specified by the manufacturer. 9. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way including: »» Damage to the power supply or power plug »» Exposure to rain or moisture
Power Supply Use: You MUST use the Power Supply provided with your unit or you VOID the Key Digital® Warranty and risk damage to your unit and associated equipment.
8/29/12 4:48 PM
10
11
How to Contact Key Digital®
Warranty
System Design Group (SDG)
All Key Digital® products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a limited two-year parts and labor warranty.
For system design questions please contact us at: ½½
Phone: 914-667-9700
½½
E-mail:
[email protected]
Customer Support For customer support questions please contact us at: ½½
Phone: 914-667-9700
½½
E-mail:
[email protected]
Technical Support For technical questions about using Key Digital® products, please contact us at: ½½
Phone: 914-667-9700
½½
E-mail:
[email protected]
Repairs and Warranty Service Should your product require warranty service or repair, please obtain a Key Digital® Return Material Authorization (RMA) number by contacting us at: ½½ Phone:
914-667-9700
½½ E-mail:
[email protected]
Feedback Please email any comments/questions about the manual to: ½½ E-mail:
[email protected]
KD-CATHD300_Manual.indd 10-11
8/29/12 4:48 PM
12
Installation Notes
KD-CATHD300_Manual.indd 12-13
13
Installation Notes
8/29/12 4:48 PM
