Transcript
Cat 318F L ®
Hydraulic Excavator 2017 The Cat ® 318F L is a perfect choice for customers who value versatility, reliability, durability, and maximum efficiency.
Performance
Serviceability
• The C 4 .4 ACER T ™ meets U.S. EPA T ier 4 F inal/ EU Stage IV emission standards. It is power ful and ef ficient , and it can run on biodiesel up to B20. • Advanced control automatically manages pump and engine speed for maximum ef ficiency. • Two power modes, high power and eco mode, help you actively manage fuel consumption. • Engine idle shutdown saves fuel, and ex tends ser vice inter vals.
• Many routine ser vice and maintenance points can be accessed from ground level reducing the time taken to check and ser vice your machine. • W ide ser vice doors make for easy access. • Filters are grouped to reduce ser vice time. • The cooling package is designed to prevent plugging, make blowing of f debris easy.
Versatility • Site prep and finishing work are quick and easy with a wide range of Cat work tools. • U tilit y work is fast and flawless with a Cat bucket and compactor. • A coupler lets you swap bet ween at tachments in seconds without leaving the cab. • See the whole money-making at tachment line for your machine at www.cat.com/attachments .
Comfort • The roll-over protective structure (ROPS) cer tified cab is quiet and comfor table. • Automatic climate control helps maintain consistent cab temperature. • Joystick consoles and armrests are adjustable. • Seats are adjus table and feature air suspension (Europe, Aus tralia, New Zealand and Pacific Islands) with an optional heater. • The LCD monitor is easy to navigate and programmable in 42 languages.
Technology • Cat Connect technology improves job site ef ficiency. • Optional Cat Grade Control helps you create a level base and precise slope with ease. • Product L ink™/ VisionLink ® connects owners to the machine, providing access to location, hours, fuel consumption, idle time, events, and diagnostic codes.
Durability • The large swing bearing is secured with elongated bolts to help handle the most swing-intensive work. • Robot welded, Caterpillar designed boom and s ticks are built for long ser vice. • Greased track link bet ween pins and bushings increases undercarriage life and reduces noise.
Safety • The hydraulic activation lever locks out all hydraulic functions. • Handrails, anti-skid plating, and countersunk bolts reduce slipping and tripping. • A ground-level engine shutof f switch shuts down the engine in case of emergency. • S tandard rear view camera and mirrors enhance visibilit y. • The side-view camera enhances visibilit y on the boom side of the machine to help make operators more ef fective and ef ficient (Europe only).
Cat 318F L Hydraulic Excavator ®
Engine
Sound Performance
Engine Model
Cat C 4 . 4 ACER T
Net Power – SAE J13 4 9 /ISO 9 24 9
8 8 kW
117 hp/119 PS
Net Power – ISO 14 3 9 6
91 kW
12 2 hp/124 PS
ISO 6 3 9 6 – Operator Sound Pressure Level
71 dB(A)
ISO 6 3 9 5 – E x terior Sound Power Level
10 2 dB(A)
Dimensions*
Gross Power – SAE J19 95
91 kW
12 2 hp/124 PS
Bore
10 5 mm
4 .13 in
S troke
127 mm
5.0 0 in
Stick
4 .4 L
26 9 in3
Shipping Height
310 0 mm
10'2 "
Shipping Length
8 58 0 mm
28'2 "
Tail Swing Radius
252 0 mm
8'3 "
Displacement
Hydraulic System Main System – Maximum Flow (total)
Reach Boom – 5.1 m (16'9") R 2.6 m (8'6 ")
3 0 0 L /min
79 gal
Length to Center of Rollers
3 2 70 mm
10'9 "
Maximum Pressure – Equipment
3 5 MPa
5, 0 76 psi
Track Length
4 0 75 mm
13'4"
Maximum Pressure – Travel
35 MPa
5, 0 76 psi
Ground Clearance
4 4 0 mm
1'5 "
Maximum Pressure – Swing
2 5 MPa
3, 6 2 6 psi
Track Gauge
19 9 0 mm
6'6"
Pilot Sys tem – Maximum Flow
2 5 L /min
6.6 gal /min
Transpor t W idth – 70 0 mm (2 8 ") Shoes
2 69 0 mm
8'10 "
Pilot System – Maximum Pressure
412 0 kPa
5 9 8 psi
Cab Height
2 89 0 mm
9'6"
Cab Height with Top Guard
310 0 mm
10'2 "
Counter weight Clearance
1010 mm
3'4"
Drive Maximum Travel Speed
3.9 8 km/h
2 .5 mph
Maximum Drawbar Pull
2 0 7.5 kN
4 6, 6 4 8 lbf
Working Ranges* Reach Boom – 5.1 m (16'9")
Machine Weights Minimum Operating Weight
Stick
18 6 0 0 kg
Maximum Operating Weight
19 2 0 0 kg
41, 010 lb
6 0 9 0 mm
20'0 "
42, 3 4 0 lb
Maximum Reach at Ground Level
8 78 0 mm
2 8'10 "
Swing Swing Speed
8.5 rpm
Swing Torque
5 0.7 kN∙m
R 2.6 m (8'6 ")
Maximum Digging Depth
37, 39 4 lbf-f t
Service Refill Capacities
Maximum Cut ting Height
89 2 0 mm
29'3 "
Maximum L oading Height
628 0 mm
2 0'7"
Minimum Loading Height
2 3 0 0 mm
7'5"
Maximum Depth Cut for 24 4 0 mm (8'0 ") Level Bot tom
5870 mm
19'3 "
Maximum Ver tical Wall Digging Depth
4 9 5 0 mm
16'2"
Fuel Tank Capacit y
290 L
76.61 gal
DEF Tank Capacit y
2 0.5 L
5.4 gal
26 L
6.9 gal
Stick
13.5 L
3.57 gal
Bucket Type
Swing Drive
8L
2.11 gal
Bucket Digging Force (SA E)
10 9 kN
Final Drive (each)
8L
2.11 gal
Bucket Digging Force (ISO)
12 3 kN
2 7,70 0 lbf
Hydraulic System (including tank)
121 L
31.9 6 gal
S tick Digging Force (SAE)
8 3 kN
18, 6 59 lbf
Hydraulic Tank
10 6 L
2 8.0 0 gal
S tick Digging Force (ISO)
8 6 kN
19, 3 3 4 lbf
Cooling System Engine Oil (with filter)
Bucket & Stick Forces* Reach Boom – 5.1 m (16'9") R 2.6 m (8'6 ")
General Dut y Bucket
24, 4 0 0 lbf
*W ith a 0.91 m3 (1.19 yd 3), 105 0 mm (41") GD bucket.
F or more complete infor mation on Cat product s, dealer ser v ices, and indus tr y solu tions, visit us on t he web at ww w.cat.com © 2 016 Caterpillar All righ ts reser ved Materials and speci fications are subject to change wi thout notice. Featured machines in pho t os may include addit ional equipment . See your Cat dealer for available options. C AT, CAT E RPIL L A R , S A F E T Y.C AT.COM, t heir respec t ive logos, “Caterpillar Yellow ” and the “Power Edge” trade dress, as well as corporate and product iden ti t y used herein, are t rademarks of Caterpillar and may no t be used wi thout permission. V isionL ink is a trademark of Trimble Navigation L imited, regis tered in the Uni ted S tates and in ot her countries.
AE XQ1912 (AUZ , EU, N ACD)
