Transcript
Product Fact Sheet
Keysight Laser Interferometer System Cables Keysight Technologies, Inc. offers a selection of cables, both fiber optic and wire, for use with Keysight Laser Interferometer systems To interconnect the laser system components, most systems will need at least one each of the three cable types: –– Fiber optic cable (remote lens assembly to remote or integrated receiver) –– Receiver cable (remote receiver to laser axis board) –– Laser head cable (laser head to power supply and laser axis board)
10881D/E/F cable
E1847A cable
Key features –– Multiple lengths available for most cables –– High performance cables minimize errors for dynamic measurements –– Locking connectors for most cable ends prevent accidental disconnection
Keysight | Laser Interferometer System Cables – Product Fact Sheet
Selection guide Model 10880A/B/C 10881A/B/C 10881D/E/F 10882A/B/C E1705A E1705B E1705C E1705E E1705F E1847A E1848A E1848B N1250A/B/E/F N1251B
Cable type Receiver Laser head (power and ref) Laser head (power and ref) Laser and receiver Fiber optic (plastic) Fiber optic (plastic) Fiber optic (plastic) Fiber optic (glass) Fiber optic (glass) Laser head (power only) Laser head (power only) Laser head (power only) Receiver Laser head (power and ref)
Power connector – Female DIN #6 Spade lugs – – – – – – #6 Spade lugs Male DIN Female DIN – Female DIN
Specific cable length options Model E1705x
E1847A/E1848A/ E1848B
Option numbers (-XXX) 004 020, 025 040, 050, 060, 080, 090, 100, 110, 120, 130, 140, 150, 160, 180 200, 300, 340, 400, 800 060, 140 200, 300, 400, 600
Lengths (m) 0.2 1.0, 1.25 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9
Tolerance (mm) +5, —0 +10, —0 +20, —0
10, 15, 17, 20, 40 3, 7 10, 15, 20, 30
+100, —0 +150, —0 +250, —0
Cable option rule (only applies to cables in this table): Option # = Cable length in mm divided by 50 mm.
Lengths (m) 5, 10, 20 3, 7, 20 3, 7, 20 3, 7, 20 See chart See chart See chart See chart See chart See chart See chart See chart 5, 10, 12, 20 7
Usage Normal Normal with 10884B Normal with user’s power supply With 5519A/B and E1735A USB electronics Normal (Vpin to Vpin) Normal (ST to Vpin) Normal (ST to ST) Lower signal loss (ST to Vpin) Lower signal loss (ST to ST) Integrated receivers with user’s power supply Integrated receivers with user’s power supply Integrated receivers with 10884B High performance High performance with 10884B
For more details on Keysight interferometry systems, components and ordering information please visit www.keysight.com/find/lasers
Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight’s commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements.
This information is subject to change without notice. © Keysight Technologies, 2011 – 2014 Published in USA, August 1, 2014 5990-8133EN www.keysight.com
