Transcript
KI-115
HIGH POWER SINGLE 15" LOW FREQUENCY SPEAKER SYSTEM
Frequency Response
Vertical 1/3 Octave Polars
Impedance 115
60 55 50
105
45 35
95
Ohms
dB
40 30 25 20
85
15 10 5 15185
6739
2991
4459
1979
1309
581
876
10047
Frequency
390
258
114
173
51
77
34
15
10
23
0
15572
10698
5113
7442
3557
1679
2443
802
1168
558
383
183
267
127
61
88
42
29
20
75
Frequency
Horizontal Off-Axis Transfer Function
Directivity Index 20
12
18 6 16 dB
14 0 10 20 30 40
-6 -12
12
dB
0
10 8 6
-18
4
-24
2 12902
8127
5120
3225
2032
1280
20480
Frequency
806
508
320
202
127
80
50
20
32
0
20480
12902
8127
5120
3225
2032
1280
806
508
Frequency
Vertical Coverage (-6dB)
Horizontal Coverage (-6dB)
360
315
315
270
270
225
225
180 135
Coverage angle
360
180 135 90
90
45
45
Vertical Off-Axis Transfer Function UP 12
0 -6 -12 -18 -24
20480
12902
8127
5120
3225
2032
1280
806
508
320
202
80
127
50
32
-30
dB
6
20
0 10 20 30 40
20480
8127
12902
5120
3225
2032
1280
806
508
320
202
127
80
50
20
12902
20480
8127
5120
3225
2032
806
508
320
127
202
80
50
32
20
1280
Frequency
Frequency
Frequency
32
0
0
Coverage angle
320
202
80
127
50
32
20
-30
Horizontal 1/3 Octave Polars
HIGH POWER SINGLE 15" LOW FREQUENCY SPEAKER SYSTEM
Architectural Specifications The KI-115 professional subwoofer shall include a single 15" (381mm) K-48-EP low-frequency transducer utilizing a 3" (76.2mm) voice coil and 95-ounce (3.23kg) magnet.
12.589
9.712
18.438 Ref
Frequency response shall be 49Hz to 300Hz, ±4dB, with the -10dB point at 37Hz, measured at three meters, half-space anechoic. Refer to graphs for horizontal and vertical dispersion angles and directivity. Sensitivity shall be 101dB SPL, measured at one meter, half-space anechoic, with a 2.83V input. Power handling shall be 400 watts (46 volts), to AES standards, continuous pink noise, 40Hz to 10kHz, 6dB peaks. Calculated maximum continuous output at one meter shall be 125dB SPL. Nominal impedance shall be 8 ohms, with 5.3 ohms minimum at 42Hz.
Designed for high output, long-term reliability, the Klipsch KI-115 low frequency enclosure utilizes a single K-48-EP cast frame 15" woofer. This 95-ounce magnet, 3" voice coil powerhouse delivers high sensitivity with superior power handling. Klipsch’s specially designed speaker motor assembly ensures that high transient cone excursions won’t damage the voice coil former under extreme output applications.
Back View
Front View
8.500
9.250
9.250
8.500
Signal connections shall be made via two parallelwired Neutrik NL-4 Speakon panel mount jacks. The enclosure panels shall be CNC-fabricated, 18mm, 9-ply birch plywood, assembled utilizing rabbet and dado joinery. Dimensions for the enclosure shall be 18.438" (46.833cm) high by 19.563" (49.69cm) deep by 24.5" (62.23cm) wide in a rectangular shape. Net weight shall be 62 lbs. (28.148kg).
Left Side View
Right Side View
10.125
19.563 Ref
19.563 Ref
12.250 Ref
10.125
The top and bottom panels shall be radiused, with a curved metal perforated grille for structural integrity and protection of the transducers from impact and tampering. The enclosure tuning shall be of a vented design. The enclosure finish shall be lacquer-based primer and lacquer-based texture paint with a black finish.
6.039
14.762 24.500 Ref
12.250 Ref
Top View
Bottom View
The system shall be a Klipsch KI-115 loudspeaker. This symbol represents the center of gravity.
Perfect for music reinforcement and reproduction, the KI-115 finds ready application in clubs, theaters, auditoriums, churches and performance environments. The rugged, tuned port, 9-ply birch enclosure utilizes CNC fabrication techniques for uniform tolerances, contributing to advanced reliability and ruggedness. Dado “lock-tab” and rabbet joint construction contribute to freedom from resonance and cabinet-induced coloration. Signal connections are provided via two parallel-wired Neutrik NL-4 Speakon panel mount jacks. The KI-115 subwoofer utilizes radiused top and bottom panels with a curved perforated metal grille, and is black dual texture-coated for weather and corrosion resistance. The KI-115 is available with or without a passive crossover, and is compatible with Klipsch KI-102, KI-172, KI-262 and KI-272 full-range professional loudspeaker systems.
3502 Woodview Trace, Suite 200 Indianapolis, IN 46268 P.O. Box 688 Hope, AR USA 71801 1-800-KLIPSCH • www.klipsch.com
©2003 Klipsch Audio Technologies. All rights reserved. Specifications subject to engineering changes.
5M0203 190545 (Rev. 2)
Like all KI Series speakers, the KI-115 is covered by the Klipsch limited five-year warranty.
KI-115 ● High power 15" cast frame woofer ● Compact heavy-duty, 13-ply Baltic Birch enclosure ● Weather-resistant, dual-coat textured black finish ● 101dB sensitivity, 125dB SPL output ● 400 watt power handling capability ● Two Neutrik NL-4 Speakon connectors ● Dado “lock-tab” and rabbet joint construction ● Only 19" X 25" X 20"
Specifications FREQUENCY RESPONSE1
49-300Hz±4dB, -10dB 37Hz (see graph)
2
400 Watts (46V)
3
125dB
POWER HANDLING
MAXIMUM CONTINUOUS OUTPUT
DISPERSION ANGLE
See Graph
DIRECTIVITY
See Graph
4
SENSITIVITY
NOMINAL IMPEDANCE COMPONENTS ENCLOSURE MATERIAL INPUT CONNECTIONS
101dB 8 Ohms, 5.3 Ohms Minimum at 42Hz (see graph) K-48-EP 15" Woofer 9-Ply Furniture Grade Birch Plywood Two NL-4 Speakon Connectors Wired in Parallel
DEPTH
19.563" (49.69cm)
HEIGHT
18.438" (46.833cm)
WIDTH
24.5" (62.23cm)
NET WEIGHT
62 lbs. (28.148kg)
SHIPPING WEIGHT
71 lbs. (32.234kg)
FINISHES
Black 3M, Half-space anechoic AES Standard, continuous pink noise 40Hz-10kHz, 6dB peaks 3 Calculated at 1M at power handling power input 4 SPL at 1M, half-space anechoic with 2.83V input 1 2
