Preview only show first 10 pages with watermark. For full document please download

Kingston-hyperx-savage-ddr4-2133-16-gb-kit-4-hx421c13sbk4 16

   EMBED

Share

Transcript

Memory Module Specifications HX421C13SBK4/16 16GB (4GB 512M x 64-Bit x 4 pcs.) DDR4-2133 CL13 288-Pin DIMM Kit SPECIFICATIONS CL(IDD) 15 cycles Row Cycle Time (tRCmin) 46.5ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.) Row Active Time (tRASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V - 0 Operating Temperature 0o C to +85o C Storage Temperature -55o C to +100o C *Power will vary depending on the SDRAM used. DESCRIPTION FEATURES HyperX HX421C13SBK4/16 is a kit of four 512M x 64-bit (4GB) DDR4-2133 CL13 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel® XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2133 at a low latency timing of 13-13-13 at 1.2V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows: • Power Supply: VDD = 1.2V Typical XMP TIMING PARAMETERS •JEDEC: DDR4-2133 CL15-15-15 @1.2V •XMP Profile #1: DDR4-2133 CL13-13-13 @1.2V • VDDQ = 1.2V Typical • VPP - 2.5V Typical • VDDSPD = 2.25V to 3.6V • On-Die termination (ODT) • 16 internal banks; 4 groups of 4 banks each • Bi-Directional Differential Data Strobe • 8 bit pre-fetch • Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) • Height 1.36” (34.57mm) Continued >> hyperxgaming.com Document No. 4807401-001.A00 08/27/15 Page 1 continued MODULE WITH HEAT SPREADER MODULE DIMENSIONS 133.35 129.55 31.25 2.10± ±0.15 Pin 1 Detail A 3.35 Detail B Pin 35 Pin 47 Detail D Detail E 64.60 28.90 14.60 17.60 8.00 11.00 2.70±0.15 3.00 Detail C Pin 105 Pin 117 56.10 22.95 FOR MORE INFORMATION, GO TO HYPERXGAMING.COM All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components. HyperX is a division of Kingston. ©2015 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. Document No. 4807401-001.A00 Page 2 hyperxgaming.com