Klangquelle_deckel_print Final Product

Transcript

STEP 1 INSTALL 1 Start your Windows PC or MAC. STEP 2 SOUND SOURCE If you have another Dante enabled product (e.g. mixing console) proceed with STEP 3. Otherwise, your computer can also stream audio. 2 OPEN www.audinate.com /products/software/dante-controller 1 OPEN www.audinate.com/products/ software/dante-virtual-soundcard 3 Downoad & Install Dante Controller 2 Purchase & Download & Install Dante Virtual Soundcard (DVS) STEP 3 CONNECT DEVICE 1 Connect external power supply if your network does not offer Power over Ethernet (PoE) 2 Connect CAT5e/CAT6 network cable to KLANG:quelle and to your computer or Dante enabled product/network Mixing Console 3 Open DVS and click on START Output Card Gigabit Ethernet 4 Set DVS as your default sound card Virtual Soundcard 5 Start your DAW or audio player 4 SAMPLE RATE 1 Open Dante Controller 2 Go to ROUTING tab and double click on your sound source. Go to DEVICE CONFIG tab and choose preferred sampling rate. Close this window. 3 Now do the same for KLANG:quelle and use the same sampling rate Dante devices can only be connected if they run at the same sampling rates. STEP 5 ROUTING 1 Connect (stereo) audio stream from sound source to KLANG:quelle Out Left and Right. STEP 6 ENJOY LISTENING 1 Connect your favourite headphones and adjust gain and volume control Volume control Pre-select gain Dante Controller SOURCE Ch 01 Ch 02 Ch 03 STEP KLANG:quelle Out1 Left Out1 Right Out2 Left Out2 Right Headphone 1 Output level meter