Transcript
EDTA (Electrical Down Tilt Antenna) Field Replaceable Internal RET
pol., H42º/ V18º, ET0~10º 806~869MHz, X-pol., 1850~1995MHz, XX-pol., pol., H37º/ V8.0º, ET0~10º ● Electrical Specification Product Number
ET-X-TU TU-42-15-37-18-iR-RA
Frequency Range
806~869MHz
1850~1995MHz
42˚
37˚
18.0˚
8.0˚
15.0 / 12.9
18.0/ 15.9
Electrical Down Tilt Range
0˚ ~ 10˚
0˚ ~ 10˚
1st Upper Sidelobe Suppression
≥ 18dB
≥ 18dB
Front-to-Back Ratio
≥ 27dB
≥ 27dB
Dual, Slant ±45˚ 45˚
Quad, Slant ±45˚
≥ 18dB
≥ 18dB
250W
250W
50Ω
50Ω
≤1.5:1 (≥ 14dB)
≤1.5:1 (≥ 14dB)
≥ 28dB
≥ 26dB T0, ≥ 28dB T2-T10
3dB Beam-Width
Horizontal Vertical
Gain (dBi /dBd)
Polarization Type Cross –Polar Discrimination
Boresight
Input Maximum CW Power Impedance VSWR (Return Loss) Isolation Between Ports Passive Intermodulation, IM3 Antenna Control Interface
≤ -150dBc 150dBc (@2x43dBm) Field Replaceable Internal RET,AISG2.0
● Mechanical Specification Dimension (Length x Width x Depth)
1219mm x 460mm x 180mm (48.0” x 18.1” x 7.1”)
Weight without Clamp
22.6kg (50.0lbs)
Max. Wind Speed
67m/s (150mph)
Wind Load (@100mph), Front / Side / Rear Connector (Type / Position)
860.5N / 336.7N / 860.5N (193.5lbf / 75.7lbf / 193.5lbf) 6 x 7/16” DIN(Female) / Bottom
• Specifications are subject to change without notice. July 19th, 2013
http://www.kmwcomm.com
