Preview only show first 10 pages with watermark. For full document please download

Knox Waterfall Faucet Installation Instructions

   EMBED

Share

Transcript

KNOX WATERFALL FAUCET INSTALLATION INSTRUCTIONS Before installing, read entire waterfall faucet installation instructions. Observe all local building and safety codes. For the following installation instructions for your new faucet it is assumed that any old fixtures have been removed and any repairs or modifications to the water supply have been completed. Unpack and inspect the product for any shipping damages. If you find damages, do not install. Contact Customer Service at 1-866-855-2284. If you need assistance or have questions while installing your faucet, contact Customer Service. We recommend consulting a professional if you are unfamiliar with installing bathroom fixtures. Signature Hardware accepts no liability for any damage to the floor, walls, plumbing or for personal injury during installation TOOLS AND MATERIALS: Adjustable Wrench Basin Wrench INSTALLATION Faucet Body Rubber Washer Braided Water Supply Locking Washer Lock Nut 1. Remove the lock nut, locking washer and rubber washer from the faucet body. 2. Attach the braided water supplies to the faucet body. Hot (red) is always on the left and cold (blue) is on the right. Knox Waterfall Faucet Installation Instructions 1 Vanity Top Filter 3. Place the faucet body through the hole in the vanity top. From beneath the sink, thread the rubber washer and locking washer onto the faucet body. Shut-off Valve 4. Remove the filter from the braided water supply. Shut-off Valve 5. Thread the filters onto the shut-off valves. 6. Attach the braided water supplies to the filters and shut-off valves. 7. When installation is complete, turn on the water supply. Check to make sure that all connections are tight (no water should be leaking) and that the hot and cold supplies are working correctly. Turn the water on and allow the water to flow through the spout for approximately 60 seconds. Knox Waterfall Faucet Installation Instructions 2