Kodak 6500 Quickstart Guide

Transcript

System Thank you for purchasing the Kodak RVG 6500 system. Find out what you can do with the RVG 6500 system and the RVG Acquisition interface. ENGLISH RVG 6500 KODAK RVG 6500 System Overview 1 Battery status indicator LED: Not charged Charging (blinking) Charged with charger connection OFF Charged without charger connection 2 S  ensor remote control button and the ON/OFF button: OFF mode Connecting to WiFi AP (blinking) Transmitting acquired x-ray image (blinking) Connected to WiFi AP Standby mode Quick Start Guide 2 Ready for acquisition Error mode 3 Sensor ENGLISH Icon Legend Icon Icon Name RVG Button Refresh Button Sensor List Button Available Button Lock On Computer Name Button Lock Button Unlock Button 4 USB connector for battery charging A Medical charger B USB cable to charge with the computer The KODAK 6500 3 Acquiring an Image with the RVG Sensor To acquire an image with the RVG sensor, follow the instructions in the folowing order. 1 Connecting RVG Sensor to the Computer You must connect the RVG sensor to your computer where the acquired image must appear. To connect the selected RVG sensor to your computer, follow these steps: 1 Press the remote control button of the selected RVG control box to turn ON the device. Wait for the blinking blue light A to become solid blue B . Quick Start Guide 4 2 Access the Imaging Window. Click the RVG button to access the RVG Acquisition interface. 3 In the RVG Acquisition interface, click the Sensor List button to access the RVG sensor list. Click the Refresh button to refresh the sensor list. ENGLISH 4 Find the selected RVG sensor in the sensor list: A If Available button then do the following: Click the Lock button to connect the sensor to your computer, the Available button becomes the Lock On Computer Name button. B If Lock On Computer Name button then do the following: Click the Unlock button to disconnect from the computer it is connected to and press quickly on the remote control button while the light is blink blue (A). If the disconnection was not executed you must redo the process. Click the Lock button to connect the sensor to your computer, the Available button becomes the Lock On Computer Name button. 5 Click the Sensor List button to return to the RVG Acquisition interface. 2 Preparing and Positioning the RVG Sensor To prepare the selected RVG sensor, follow these steps: The KODAK 6500 5 1 Select an appropriate positioner for the region of interest and the sensor size. 2 Cover with a disposable hygienic sleeves specifically designed for each sensor size. Important: To prevent crosscontamination, use a new hygienic barrier for each new patient. 3 Place the protected RVG sensor in the sensor positioner’s biteblock. Quick Start Guide 6 4 Insert the sensor holding it horizontally in the patient’s mouth and position it according to the region of interest. To prepare the x-ray generator, follow these steps: 1 Select the x-ray timing according to the region of interest and the patient type (follow the user instructions of your x-ray generator). 2 Approach the x-ray generator tube head to the patient. ENGLISH 3 Preparing the X-Ray Generator 2 Position yourself either 2 meters behind the x-ray generator or outside the door. 3 Keep visual contact with the patient during the x-ray. 4 Press the remote control button of the selected RVG control box to access the RVG Acquisition interface. 3 Align the tube head with the patient’s head and the sensor and make sure that the tube head is not shacking. 4 Launching the X-Ray To launch the x-ray, follow these steps: 1 Ask the patient to remain still. The KODAK 6500 7 5 Trigger the x-ray with the remote control of the x-ray generator. The acquired image appears in the preview screen of the RVG Acquisition interface. The light on the remote control button blinks blue indicating the image transmission. When the acquisition ends, the RVG Acquisition interface disappears and the acquired image is displayed in the Imaging Window. The light on the remote control button becomes solid blue. 6 Check the image quality. If not satisfactory, redo the x-ray. 7 If satisfactory, remove the generator tube head. 8 Remove the RVG sensor from the patient’s mouth. Quick Start Guide 8 9 Remove the hygienic sensor protection. Important: DO NOT pull the sensor by its cable when you remove the hygienic protection.