Transcript
bizhub C280 Design 簡易說明書 Shortcut Manual
1. Touch Pen
輕觸筆
2. Touch Panel
輕觸螢光幕
3. Main Power indicator 電源指示燈 4. Sub power switch 副電源開關 5. Function key 公能鍵 6. Data indicator 資料指示燈 7. Keypad 數字鍵 8. Brightness Adjustment Dial 螢光幕亮度調整鍵 2
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Konica Minolta C280 Design **如已選用共用用戶認證功能，請跟以下步驟進入使用版面 ** If device with public authentication function, please follow the below steps 彩色複印 Color Copy 1.按【列表】選擇用戶名稱，按【確定】 Press【User Name List】Select user name and Press【OK】 2.按【密碼】輸入密碼，按【確定】 ， Press【password】press【OK】 3.按【Access】。 Press【Access】 黑白複印 B/W Copy
先按 [共同的使用者部門] Press [Public User access]
複印後: (鎖機)請按【Access】鍵 2 次 Press 【Access】twice times to logout
3
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
影印功能
Copy Function
Basic 基本設定 (I) 1.
自動彩色 – 自動探測原稿是彩色文件或黑白文件 Auto Color – This setting to automatically detect the documents are in color or black and white
2.
全彩 – 列印彩色文件 Full Color – The copy in full color
3.
黑色 – 列印黑白文件 Black – The copy in black and white
4.
雙色 -- 如原稿圖案或文字分為黑色和彩 色，可把原稿彩色的部份轉變為選擇的其中 一種顏色，而黑色的部份則不變 2 Color – Print all areas of the document determined to be in color with the specified color, and print all areas determined to be black in black
5.
單色 – 可把文件的影像轉變為選擇的其中 一種顏色 Single Color – Print copies in the specified color, regardless of whether the document is in color or in black and white
4
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Basic 基本設定 (II) -- Paper 紙張 更改手送紙紙張尺寸 1
Change Bypass Tray Setting 按 基本設定 ，按 紙張 Press Basic, Press Paper
2
選擇手送紙盤 Select Paper Type
3
按 紙盤變更設定 Press change Tray Settings
4
選擇紙張類型 Press Select Paper Type
5
輸入適合的尺寸 Input paper size a 按尺寸設定，選擇標準尺寸 Touch Standard Size b
按自定尺寸 輸入長度 X 和寬度 Y，例如 90mm 輸入 0900 (如要儲存尺寸，按儲存， 再選擇儲存位 置 Memory1 -5 ) Touch Custom Size input (Length) X and (width) Y，e.g. 90mm please input 0900 (If stored paper size，touch
6
5
Store， then choose Memory1 -5 ) 按 OK Press OK
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Basic 基本設定 (III) -- 倍率 Zoom 按 倍率 Press ZOOM 1
選擇一般的變焦比率 Select fixed zoom size a 按預設的縮小 / 放大比率 例如︰A3 A4 設定數字為 0.707 Touch Fixed zoom ratios e.g.︰A3 A4 default zoom ratio is 0.707 b 按 - + 加減號增加或減少變焦數字 Touch- + to change zoom ratio
2
按 手動 ,直接輸入變焦數字，按 OK 確定 Touch Manual , Using the keypad，type in the desired zoom ratio then touch OK
6
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
分頁/分類 Sort/Group
1.
按分頁機 Press Finishing
2.
可按分頁或 群組 Press Sort or Group
Sort
3.
Group
如沒有其他設定，按 Start 影印鍵 Press Start to Copy
位移功能 Offset 1. 按分頁機 Press Finishing 2. 在位移功能項目中按是 In Offset option select Yes 3. 如沒有其他設定，按 Start 影印鍵 Press Start to Copy
*如沒有安裝訂裝器,副本會用十字型式分隔 If no finisher is installed, printed copies are sorted in crisscross pattern 如有安裝訂裝器,副本會用前後型式分隔 If a finisher is installed, the copies are stacked on top of each other with each set shifted to separate it 7
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
(必需加裝配件才有以下功能) (Optional Function)
訂裝 Staple 1. 按 分頁機 Press Finishing
2. 在訂裝項目中按 訂角 或 2 個位置 At Staple select Corner or 2position 3. 按 位置設定選擇訂裝位置 Press position Setting to desired staple positions 4. 如沒有其他設定，按 Start 影印鍵 Press Start to Copy
打孔 Punch 1. 按 分頁機 Touch Finishing 2. 在訂裝項目中按 2 孔 或 4 孔 At Staple select 2 Hole or 4 Hole 3. 按 位置設定選擇打孔位置 Touch position Setting
4. 如沒有其他設定，按 Start 影印鍵 Press Start to Copy
8
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
必須加裝配件才有此功能 (Optional Parts is needed)
摺疊/書本訂裝 Fold/Bind
1. 按分頁機 Press Finishing
2. 在 摺疊/裝訂項目中按 Yes 啟動功能 At Fold/Bind select Yes
3. 按 對摺 中間裝訂 或 三摺 Touch Half-Fold Center Staple & Fold or Tri-Fold
Half-Fold 對摺
9
Center Staple & Fold 中間裝訂
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Tri-Fold 三摺
Basic 基本設定 (IV) --Duplex/Combine 雙面/組合 選擇組合
Combine function 按 2 in 12 合 1 兩張原稿縮為一張 或 4 in 1/ 8 in 14 合 1/8 合 1 四張/八張原稿縮為一張 Touch 2 in 1 or Touch 4 in 1/ 8 in 1 To reduce the size from 2 / 4 / 8 sheets originals into 1 sheet of copy
選擇 原稿 > 影本 Press Original ＞ Copy a.單面原稿 印 雙面副本 1-sided > 2-sided 單面 > 雙面 1-sided > 2-sided Single-sided Original to Double-sided Copy
b.雙面原稿 印 單面副本 2-sided >1-sided 雙面 > 單面 2-sided >1-sided Double-sided Original to Single-sided Copy
c.雙面原稿 印 雙面副本 2-sided >2-sided 雙面 > 雙面 2-sided >2-sided Double-sided Original to Double-sided Copy
10
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Quality/Density 品質濃淡度 1. 可在原稿類型 選擇適當的原稿類型 Select Original Type to choose Text, Text/Photo, Photo, Map, Dot Matrix Original or Copied Paper
2. 按 濃淡度 調校整份文件的深淺度 Touch Density – the print image
can be adjusted, each time [Lighter] or [Darker] is touched, the
density is lightened or darkened by one level.
3. 按 底色調整 調校原稿背景的深淺度 Touch Background Removal – the density of the background color of the document can be adjusted, each time [Light] or [Dark] is touched, the background density is lightened or darkened by one level. Paper Discoloration Adj to make adjustment for background removal for copying. Bleed Removal to make adjustment for thin paper for copying
4. 按 文字增強 調校原稿文字的深淺度 Touch Text Enhancement – select the reproduction quality of text when copying documents consisting of text that overlaps images such as illustrations or graphs
5. 選擇 光澤面 開動光面效果 Touch Glossy – select this setting when copying images with a glossy finish
11
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Originals Setting 原稿設定 1
按 Mixed Original 混合原稿啓動探測功能,如 放在自動送紙器的原稿有不同大小的混合 Press Mixed Original to Loads originals of different sizes (A4 or A3) into the ADF and scan them at a time.
2
按 Z-Folded Original 確保 Z 摺疊過的原稿在 影印時不會誤認原稿尺寸 Press Z-Folded Original correctly detects the original size
3
when folded originals are loaded into the ADF and copied. 按 Binding Position 原稿空白邊設定原稿內容的方向 Press Binding Position specify the original binding position (page margin) to prevent the copy from being printed upside-down when scanning a 2-sided original.
4
按 Original Direction 原稿設定方向設定預留的訂裝位置 Press Original Direction when copying double-sided originals or making double-sided or combined copies, press this button to specify the direction in which the original is loaded into the ADF or placed on the Original Glass.
5
按 Original Size 原稿尺寸設定原稿大小, 預設是自動探測原稿大小 Press Original Size to specify the original size, the default setting is auto detect
Proof Copy
在做好需要的設定後，按 兩次 Proof Copy 鍵可 預覽影印效果 Press Proof Copy twice to preview the image for checking the copy result
按 Start 確認並列印，或 按 Stop 重選覆印功能 To confirm press the Start button to print out or press Stop button to go back and do more adjustment
12
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Application 應用功能
插頁/封面/章節/投影片插頁/畫像插入 [Sheet/Cover/Chapter Insert] 色彩編輯 [Edit Color]
頁連寫/重覆 [Book Copy/Repeat]
頁面空白邊 [Page Margin] 畫像調整 [Image Adjust] 小冊子 [Booklet]
消框 [Erase]
戳記/構成 [Stamp/Composition]
卡片 [Card Shot]
儲存到使用者信箱 [Save in User Box] 13
在副本列印時插入特定紙張或加入特殊紙張作封面 Inserts another sheet of paper or adds a cover page to the paper for copying. Page 14 – 15 調整彩色覆印的色彩效果 Inverts the contrast or gradation of the original or prints the original in the mirror image. It also adds a color in the background or adjust the quality of a color image. Page 16 影印書本；將細小的原稿以密舖平面方式重覆地印在副本上 Configure the settings for a book or catalog. An image on a single sheet of original can be repeatedly copied or divided and enlarged in parts to produce copies of the respective parts. Page 17 – 19 預留空白邊作釘裝 Select the binding margin (blank area) of the paper used for copying. Page 19 當原稿的尺寸比副本的紙張為小時可調整顯示的內容方式 Configure the layout for the image when the paper is larger than the original. Page 20 自動將原稿排好排版並計算好放大縮小的比例用雙面列印功能印成一本小冊子 Automatically arranges the page order of the scanned original and makes 2-sided 2 in 1 copies to produce a page layout for a center bound book, such as a magazine. Page 21 將原稿以外的部份留空不印在副本上 Erases unnecessary outside portion of the original body text or erases the area outside the original placed on the Original Glass. Page 22 在副本上加上原稿沒有的日期/時間,頁碼或戳記，亦可加上複印防護的功能 Prints the date/time, page number or a stamp printed on copies. This function also allows you to embed information for preventing unauthorized copying in a document. Page 23 - 25 影印卡片的正面和背面都印在同一張紙 Copies the contents of the front and back sides of a card-size original, for example, insurance card, driver's license, or business card, on one sheet. Page 26 將原稿儲存到影印機的硬碟內 Saves the scanned original data in a User Box. Page 26 Konica Minolta Business Solutions (HK) Ltd.
Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
[Sheet/Cover/Chapter Insert] 插頁/封面/章節/投影片插頁/畫像插入 - OHP 投影片插頁 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 OHP Interleave OHP 白紙插頁 (必須選擇黑白模式) Select OHP Interleave 4. 選擇分隔紙的紙盤 Select the Interleave Paper 5. 把投射膠片放在手送紙盤 Place the Transparency at the bypass tray 6. 按 OK Press OK 7. 按 Start 影印鍵 Press Start
- Cover Mode 封面 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 Cover Mode 封面 Select Cover Mode 4. 選擇前封面有沒有影像或後封面有沒有影像 Select Print Image at the Front / Back Cover or not 5. 及哪一個紙盤放置前封面紙或後封面紙 Also select which tray has the Front / Back Cover Paper 6. 按 Ok Press OK 7. 按 Start Press Start
14
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
- Insert Sheet 插頁 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 Insert Sheet 插頁 Select Insert Sheet 4. 按 Copy 複印或 Blank 空白選擇插入的頁數有 沒有影像 Select Copy or Blank to set up print image at the insert pages or not 5. 輸入需插入的頁號和選擇插紙的紙盤 Key in the page no. of the insert pages then select which tray has the insert paper 6. 按 Ok Press OK 7. 按 Start Press Start
- Insert Image 插入影像 1. 按 Application 應用功能 Select Application 2. 按 Sheet /Cover /Chapter Insert 插頁 / 封面 / 插入章節 Select Sheet /Cover /Chapter Insert 3. 按 Insert Image 插頁 Select Insert Image 4. 輸入需插入的頁號 Key in the page no. of the insert image 5. 按 Ok Press OK 6. 按 Start Press Start
15
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
[Edit Color] 色彩編輯
- Neg. Pos. Reverse 黑白反像 1. 按 Application 應用功能 Select Application 2. 按 Edit Color 色彩編輯 Select Edit Color 3. 按 Neg. Pos. Reverse 黑白反像 Select Neg. Pos. Reverse 4. 按 Neg. Pos. Reverse 黑白反像 Select Neg. Pos. Reverse
- Mirror Image 鏡面畫像 1. 按 Application 應用功能 Select Application 2. 按 Edit Color 色彩編輯 Select Edit Color 3. 按 Mirror Image 鏡面畫像 Select Mirror Image
- Background Color 底色色彩 1. 按 Application 應用功能 Select Application 2. 按 Edit Color 色彩編輯 Select Edit Color 3. 按按 Background Color 底色色彩設定背景顏色 Select Background Color 16
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
- Book Copy 書本複印 按 Application 應用功能 Select Application 1. 按 Book Copy / Repeat 頁連寫/重覆 Select Book Copy / Repeat 2. 按 Book Copy 書本掃瞄 Select Book Copy 3. 再按 Separation，同時可選擇要不要 Select Separation 4. Front Cover/Back Cover 前封面或後封面 Also you can select Front Cover/Back Cover to copy the front Cover or back cover of the original. 5. 把書打開放在鏡面左上角，按 Start Open and place the book at the top right of the original glass and press Start 6. 直至掃描整本書後，按 Finish Until you have scan all the original you can press Finish 7. 再按 Start
Fig.
At last press the Start button to print out 如選擇 Front Cover 前封面，掃描時︰ If you have select the Front Cover Function: Fig.1.
Fig.3.
先把前封面放在鏡面左上角，按 Start Place the front cover at the top right of the original glass and press Start 然後才揭至第一頁掃描，直至掃描整本書後，按 Finish 再按 Start After you scan the front cover, open the book and place the 1st page to continues the scanning, until you have scan all the original you can press Finish, then press Start button to print out
如選擇 Front Cover 前封面和後封面 Back Cover，掃描時︰ If you have select the Front and Back Cover Function: Fig.1. Fig.2. Fig.3.
17
先把前封面放在鏡面左上角，按 Start Place the front cover at the top right of the original glass and press Start 再把後封面放在鏡面左上角，按 Start Then place the back cover at the top right of the original glass and press Start 然後才揭至第一頁掃描，直至掃描整本書後，按 Finish 再按 Start After you scan the front cover, open the book and place the 1st page to continues the scanning, until you have scan all the original you can press Finish, then press Start button to print out
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
-
Image Repeat 畫像重複
1.
按 Application 應用功能
With Margin
Select Application 2.
Original
按 Book Copy / Repeat 頁連寫 / 重覆 Select Book Copy / Repeat
3.
按 Image Repeat 畫像重複 Select Image Repeat
4.
選擇 With Margin / Without Margin 有空白邊 / 沒有空白邊 Select With Margin / Without Margin
5.
按 Set Range 範圍設定 Select Set Range
6.
按 Custom Size 自訂尺寸， 按 X 輸入長度 和 按 Y 輸入寬度 Select Custom Size to enter the original size, press X then key in the Width of the original, press Y original.
7.
按 OK Press OK
8.
按 Start Press Start
18
then key in the Height of
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Without Margin
- Poster Mode 海報模式 1.
按 Application 應用功能
2.
Select Application 按 Book Copy / Repeat 頁連寫/重覆
3.
Select Book Copy / Repeat 按 Poster Mode 海報模式
4.
Select Poster Mode 按 Zoom 倍率﹐選擇要放大的倍數 Select Zoom to setup the zoom ratio
5. 6.
按 OK Press OK 按 Start Press Start
- Page Margin 頁面空白邊 1.
按 Application 應用功能
2.
Select Application 按 Page Margin 頁邊的空白邊
3.
Select Page Margin 選擇要加裝釘線的位置 Top 頂端 Left 左側 或 Right 右側
4.
Select the margin position Top, Left or Right 於 Adjust Value 調整值畫像移位中輸入寬度 Setup the width of the margin by Key pad
5. 6.
19
or + / 按 OK Press OK 按 Start Press Start
button
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
- Image Adjustment 畫像調整 1.
按 Application 應用功能
2.
Select Application 按 Image Adjust 畫像調整
3.
Select Image Adjust 可選擇 Full Size 全尺寸 / Center Zoom 中間倍率 或 Centering 僅有中間
4. 5.
20
Select Full Size, Center Zoom or Centering 按 OK Press OK 按 Start Press Start
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
- Booklet 小冊子 1. 2. 3.
4.
按 Application 應用功能 Select Application 按 Booklet 小冊子 Select Booklet 可選擇 左邊或右邊 Left Binding / Right Binding Select Left Binding / Right Binding 按 摺疊/裝訂 選擇摺疊或裝訂的方式 Select Fold/Bind to setup the fold or bind function (必須加裝配件才有此功能) (Optional Parts is needed)
選擇 中間裝訂 對摺 或 不裝訂 Select Center Staple & fold, Half-fold No 5.
按 Paper 選擇紙張 Press Paper to select the output paper
6.
按 Cover Sheet 插入封面 Press Cover Sheet to insert cover sheet (詳情請看第 13 頁 Cover Mode 封面功能)
Half-Fold 對摺
Center Staple & Fold 中間裝訂
(For more details please refer to Page 13 Cover Mode function) 7. 8.
21
按 OK Press OK 按 Start Press Start
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
- Frame Erase 邊框刪除 1.
按 應用功能 Press Application
2.
按 刪除 Press Erase
3.
按 邊框刪除 Press Frame Erase
4.
選擇要刪除影像的位置及寬度 Select the edge and input the width
5.
按 OK 再按 Start Press OK and then
Start
- Non-Image Area Erase 非畫像影像消 1
按 應用功能 Press Application
2
按 刪除 Press Erase
3
按 非畫像影像消 Press Non-Image Area Erase
4
按 OK 再按 Start Press OK and then
22
Start
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Stamp Composition 戳記構成 - Date / Time 日期時間 1 按 應用功能 Press Application 2 可選擇 戳記/構成 Select Stamp/Composition 3 按 日期/時間 Select Date / Time 4 按 列印位置 可選擇把日期打印在不同位置 Press Print Position set up the position of the date and time 按 文字色彩 可選擇把日期的顏色 Press Text Color set up the color of the date and time 按 文字尺寸 可選擇把日期的大小尺寸 Press Text Size set up the size of the date and time 選擇 所有頁面 在每一張副本上都列印日期時間 Select All Pages to print date/time in whole print out 選擇 僅限首頁 只在第一張副本上都列印日期時 間 Select 1st Page Only to print date/time on the 1st page only 5 按 OK ， 再按 Start Press OK, then press Start
- Page # 頁碼 1.
按 應用功能 Press
2.
Application
按 戳記/構成 Select Stamp/Composition
3.
按 頁碼 Select Page Number
4.
在 首頁頁碼 中可輸入開始號碼 Enter the starting no. at Starting Page Number
5.
按 列印位置 可選擇把日期打印在不同位置 (Press Print Position to change the print position)
6
按 OK ， 再按 Start
7
Press OK, then press Start
23
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
- Page # 頁碼 1.
按 應用功能 Press
2.
Application
按 戳記/構成 Select Stamp/Composition
3.
按 戳記 Select Stamp
4.
選擇戳記 Select the watermark massage
5.
按 列印位置 可選擇戳記打印的位置
6.
Press Print Position to change the print position 按 OK ， 再按 Start Press OK, then press Start
- Copy Protect 複印防護 1.
按 應用功能 Press
2.
Application
按 戳記 / 構成 Select Stamp/Composition
3.
按 Copy Security Select Copy Security
4.
按 複印防護 Select Copy Protect
5.
按 預設戳記 選擇水印， 或按 日期時間 選擇日期時間， 或可按 細節設定 選擇顏色深淺等詳細資料 Press Preset Stamp to select the watermark massage, Press Date/Time to add the printing date & time on the output, Press Detail Setting to change the copy protect image color or density setting
6.
按 OK 後，再按 Start Press OK, then press Start
24
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Overlay 重疊 1.
按 應用功能 Press
2.
Application
按 戳記 / 構成 ，再按 重疊 Select Stamp/Composition, then select Overlay
3.
按 色彩 選擇用作重疊的原稿在列印時的顏色， 自動彩色 = 和原稿一樣的顏色, 黑色 = 用黑白色 列印 Press Color to select the overlay image printing color, Auto color = same as original, Black = print in B / W
4.
按 OK 後，再按 Start Press OK, then press Start
25
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
- Card Shot 卡片 1. 按 應用功能 Press
Application
2. 按卡片 Press Card Shot 3. 按[X] 和 [Y]輸入卡片的尺寸 Press [X] and [Y] and enter the size of the card 4. 按 版面 選擇排版方式 Press Layout to select the layout type of print out 5. 按 倍率 選擇縮放方式 Press Zoom to select the zoom type 全尺寸 = 1 比 1 比例 (100%) 自動 = 根據原稿尺寸自動計算放大縮小的倍率 Full Size = 1:1 (100%) Auto = Automatically selected based on the size of original 6. 按 Start Press Start
- Save In User Box 儲存到使用者信箱 1. 按 應用功能 Press Application 2. 按 儲存到使用者信箱 Press Save In User Box 3. 按 使用者信箱 選擇目的地信箱 Press User Box to specify destination user box 4. 按 文件名稱 更改文件名稱 Press Document Name to change document name 5. 儲存列印 是 = 在影印的同時將文件儲存到使用者信箱 儲存列印 否 = 只將文件儲存到使用者信箱並不會覆印 Save & Print Yes = Save the document to the User Box & print a copy at the same time Save & Print No = Save the document to the User Box only 6. 按 Start Press Start 26
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
停止正在等候的工作 Delete the copy jab in the Waiting List 1.
按作業顯示
2.
press Job List 按作業細節
3.
Press Job Details 選擇正在等候的工作
4.
按 刪除
5.
Press Delete 按 是 後按 OK 清除工作的命令 Press
Yes
and then
OK to delete printing job
Select the job you want to delete
27
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
增加電郵或傳真 Add Email or Fax 1. 按 Utility/Counter Press Utility/Counter 2. 按 1. 目的地/信箱的登記 Press 1. One Touch/User Box Registration 3. 按 1. 掃瞄登錄/傳真目的地 Press 1. Create One Touch Destination 4. 按 1. 地址簿(共用) Press 1.Address Book(Public) 5. 按 電郵送信 或 傳真傳送 Press E-mail or Fax 6. 按 新的 Press New 7. 按 名稱，輸入名稱，按 OK Press Name to input name and Press OK 8. 按輸入電郵地址/傳真地址，按 OK Press Address to input email or fax address and press OK 9. 按 索引，選擇要放在哪個索引中,按 OK Press Index and select Favorites or other Index and press OK
28
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
傳真 / 掃瞄功能 1.
Fax / Scan Function
按 Fax/Scan Press Fax/Scan
2.
選擇一按鍵的索引尋找傳真或掃瞄 的目的地 Find the destination by one-touch Index
如果是傳真可直接按數字鍵輸入傳真號碼 For fax function you can also press the number key pad directly to input the fax number 如果希望將同一份文件傳真到多個目的地，可在輸入第一個地址後按 下一個目的地 便可繼續加入目 的地 If you want to fax the same document to multiple destination you can press the next destination button to let you input the next destination fax number (必須加裝傳真配件才有此功能) (Optional Fax Parts is needed)
3. 按 Start Press Start
29
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
掃瞄設定 Scan Setting 1.
按 Fax/Scan Press Fax/Scan
2.
掃描設定 Scan Setting A. 原稿型態 – 選擇原稿類型 Original Type - Select original type B.
單面/雙面 - 設定原稿是單或雙面 Simplex/Duplex - Select original single-sided or double-sided
C.
解晰度 - 設定解像度 Resolution – resolution setting
D.
檔案類型 - 設定掃瞄後的檔案類型式 File Type – Change file format 多頁 - 把多頁的掃瞄文件存為一個檔案 (於 JPEG 不能使用) Multi Page- combine all scanned original data and save as a single file (can’t use if “JPEG” is select) 分頁 – 把掃瞄的文件分為指定的頁數儲存. (按數字鍵選擇指定的頁數) Page Separation - divide the scanned data at a specified page. (Specified by pressing number key pad)
E.
濃淡度 - 設定深淺度 Density – Change density
F.
色彩 - 設定掃瞄色彩, Color – change color mode, B/W or Color
G. 分離掃瞄 - 不同文件可分開掃瞄並合成為一檔案 Separate Scan – Originals can be separate to scan and save as a single file 3.
原稿設定 Original Setting 混合原稿 - 啓動探測功能, 如放在自動送紙器的原稿有不同大小的混合
4.
Mixed Original - Scan originals of different sizes are loaded together into the feeder 選擇一按鍵的索引尋找傳真或掃瞄的目的
5.
Find the destination by one-touch Index 按 Start Press Start
30
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
檢查傳送記錄 1. 2. 3. 4.
按 按 按 按
Display the Job History List
作業細節 傳送 作業日誌 通信清單
1. 2. 3. 4. 5. 6.
5. 選擇 掃瞄傳送報表 / 傳真傳送報表 6. 選擇要列印的報告 A. 動態式報表 B. 傳送報表 C. 接收報表
Press Job Details Press Send Press Job History Press Comm. List Select Scan TX List / Fax TX List Select which report you want to print
A、 Activity Report B、 TX Report C、 RX Report 7. Press Start Button
7. 按 Start
2 3 4
5
31
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
使用者信箱功能
User Box Function
列印使用者信箱內的文件
Print a document from User Box
1. 按 User Box Press User Box 2. 選擇需要的使用者信箱 Select the user box 3. 按 Use/File Press Use/File 4. 選擇需要的文件 Select the document 5. 按 列印設定 Press Print A, 選擇列印份數 (按數字鍵輸入) Select how many copies by num. key pad B, 選擇單面 / 雙面列印 Select single / double side printing C, 選擇全彩色 / 黑白列印 Select Color mode: Full Color / Black 6. 按 Start Press Start
32
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
儲存文件到使用者信箱
Save a document to User Box
1. 按 User Box Press User Box 2. 選擇需要的使用者信箱 Select the user box 3. 按 Save Document Press 儲存文件 4. 在按 Start 開始掃瞄之前可更改下 列設定 You can change the below setting before you press the Start button to save the document to user box A, 按 文件名稱 便可更改文件名稱 Press Document Name to Change Document Name B, 按 掃瞄設定 便可更改掃瞄設定 Press Scan Setting to Change Scan Setting 設定原稿是單面 / 雙面掃瞄 Select single / double side original scanning mode 選擇檔案格式 (PDF / JPEG / TIFF / Compact PDF) Select file type (PDF / JPEG / TIFF / Compact PDF) 選擇自動彩色 / 全彩色 / 黑白 灰楷尺度掃瞄模式 Select Color mode: Auto Color / Full Color / Black / Gray Scale 33
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Clearing paper jams 清除塞紙 Feeder
Right – Side Door
34
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Replacing the toner cartridge 更換碳粉 *當某碳粉接近不足時，版面會顯示右邊的提示, *If toner near empty，Screen will show toner empty message
*如沒有使用數碼醫生服務, 請電 25652190 安排送 新的碳粉 If not join Digital Doctor Service, please call 25652190 to order new toner - Toner Cartridge (Y) = Yellow Toner 黃色碳粉 - Toner Cartridge (M) = Magenta Toner 紅色碳粉 - Toner Cartridge (C) = Cyan Toner 藍色碳粉 - Toner Cartridge (K) = Black Toner 黑色碳粉 以下是更換碳粉之步驟 The following procedure discribes how to replace the toner
35
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Replacing the waste toner box 更換廢棄碳粉閘 Replacing the waste toner box 更廢棄碳粉閘 *當廢棄碳粉閘將近滿時，版面會顯示右邊的提示 If waste toner box is full, screen will show replace toner box message *如沒有使用數碼醫生服務, 請電 25652190 安排送新的 廢棄碳粉閘 If not join our Digital Doctor Service, please call 25652190 to order new waste toner box
以下是更廢棄碳粉閘之步驟 The following procedure discribes how to replace the waste toner box
36
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
報讀和打印總咪錶數 Check and Print meter list, 如沒有安裝數碼醫生,請每月把咪錶報告傳真至 2565 2128 If Digital Doctor not installed, please fax the meter report to 2565 2128 monthly
1.
按 Utility / Counter Press Utility / Counter
2.
按 計數器 Press Meter Count
3.
按 細節檢查 Press Check Details
4.
按 列印 Press Print List
5.
選擇紙盤 Select paper tray
6.
按 Start Press Start
37
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Secure print 機密列印 1. 按【檔案】【列印】【選擇打印機】 Click【File】【Print】【Select Printer】
3. 按【內容】 Click【Preference】
4. 於【輸出方法】選【機密列印】輸入[機密列印 ID]和[密碼] Click【Output Method】and select【Secure Print】, input ID and Password
5. 按 [確定] Click [OK]
於影印機取回機密列印文件程序
-
Recall a job from Copier 1. 按【User Box】 Press 【User Box】 2. 按【系統】 【機密文件使用者案箱】【使用 /檔案】 Press 【System User Box】 【Secure print user Box】【Use/File】 3. 於[機密列印 ID] 和 [密碼] 輸入 ID/密碼, 再 按【OK】 Input ID and Password in the field of [Secure print ID] and [Password] 4. 選擇所需文件之後按【列印】再按【Start】 Select desired file, press 【print】and then【Start】
38
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
列印信封或特別尺寸紙張 Print Envelope or custom size paper 1. 先把影印機手送盤上的紙拿走 Take paper away in Bypass tray, to keep it empty.
電腦打印程序設計 Printer Driver Setting 在電腦開啓文件後，選擇本印表機
2.
Open the file，Click printer driver
點選 [內容]
3.
Click [Preferences] 在[原稿尺寸]內選擇[自定尺寸]輸入原稿紙張
4.
之尺寸(如: 110mm x 220mm) Click [Original Size] select [Custom size] then input Width and Length (e.g. : 110mm x 220mm) 在[紙張尺寸] 內選 [如同原稿尺寸]
5.
Click [Output Size] select [Same as Original Size] 6. 按 [確定] Press [OK] 7. 手放信封或特別尺寸紙張紙張在影印機手送盤上 (正面向下) Place envelope or custom size paper on Bypass tray (Face Down) 8. 按[完成] Press [Complete]
39
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
列印長紙張之簡易程序 Banner Paper Printing User Guide 長紙尺寸: 寛 210 - 296mm / 高 457.3 –1200mm Banner paper size: (Width) 210 - 296mm / (Length) 457.3 –1200mm
請在列印長紙前，先在印表機開啟此功能 Prepare printing on Banner Paper
1.
按 [Utility/ Counter] Press [Utility/ Counter]
2.
選 [6. 長紙張] Press [6. Banner Printing]
3.
選 [Allow 允許]，再按 [OK 確定]
Touch [Allow]，then touch [OK]
電腦傳送文件之程序 Printer Driver Setting
4.
在電腦開啓文件後，選擇本印表機
Open the file，Click printer driver 5.
點選 [內容] Click [Preferences]
6.
在[原稿尺寸]內選擇[自定尺寸]輸入原稿 紙張之尺寸(如: 296mm x 1143mm) Click [Original Size] select [Custom size], then input Width and Length(e.g. : 296mm x 1143mm)
40
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
7.
在[紙張尺寸] 內選 [如同原稿尺寸] ** 印表機裝置自動選取 手送紙盤及 紙張類型 為 厚紙 3
Click [Output Size] select [Same as Original Size] Printer Driver automatically select to Bypass tray and Paper type automatically Think 3 8. 按 [確定] Press [OK]
當印表機接收到列印文件指令時 Printing Banner Printing 9. 本印表機會顯示接收文件之訊息，按 [確定]
Specify the desired settings，then touch [OK] 10. 請將長紙張放於手送紙盤
Feed the banner paper to Bypass Tray 11. 列印完成後按 [Exit 離開]
When printing is finished, touch [Exit] 12. 按 [Yes 是]
Touch [Yes] 13. 按 [OK 確定] 結束此工作，回復基本設定。
Then touch [OK] to finish banner-printing function
41
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
select to
使用外置記憶體 Using External Memory
USB Port
從外置記憶體打印 Print from External Memory 按[從外接記憶體打印] 選擇要打印的檔案 [列印][Start] Press [Print a document form external memory] Select file [Print][Start]
掃瞄到外置記憶體 scan to External Memory (要先在管理員模式先開動此功能 Must enable in Admin mode first) 按[掃瞄檔案到外接記憶體] 按[Start] Press [Save a document to external memory] Press[Start]
42
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Fiery Printer Driver And Command Workstation 4.0
For details, please refer to Operation manual
43
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Part A: INSTALLATION A1: Install fiery printer driver for Windows TO DOWNLOAD PRINTER DRIVER FILES WITH WEBTOOLS 1.
Start your Internet or intranet browser and type IP address of the Fiery
2.
Click the Downloads tab.
3.
Click the link for the item that you want to install. For Windows printer drivers, click the Printer Files link under the Windows heading.
4.
If a dialog box prompts you to open the file or save it to disk, choose to save it to disk.
5.
Browse to the location where you want to save the PRNTDRVE.EXE file and click Save. The file is downloaded from the Fiery. This compressed file is an archive that contains multiple files.
6.
Double-click the PRNTDRVE.EXE file to extract the files.
Depending on your operating system, you might be prompted to select a location to extract the files to.
TO INSTALL Printer Driver FOR WINDOWS: 1. Windows XP: Click Start and choose Printers and Faxes. Windows Vista/7: Click the Start button, choose Control Panel, and then double-click Printers.
2. Windows XP: Click the Add Printer icon and click Next. Windows Vista/7: Click Add a printer.
3. Windows XP: Specify printing using a Local printer, clear the “Automatically detect and install my Plug and Play printer” option, and then click Next. Windows Vista/7: Select Add a local printer.
4. Select Create a New Port, choose Standard TCP/IP Port from the Type of port menu, and click Next.
5. Windows XP: Click Next in the Welcome to the Add Standard TCP/IP Printer Port Wizard dialog box. The Add Standard TCP/IP Printer Port Wizard dialog box appears. Proceed to step 6. Windows Vista/7: Select the Device Type, type the Hostname or IP address of the Fiery, and then click Next. Proceed to step 9.
6. Type the printer name or IP address of the Fiery and click Next. Select the Device Type and click Next.
7. Windows 2000/XP: Make sure that Generic Network Card is selected as Standard for Device Type and click Next.
8. Windows 2000/XP/Server 2003: Click Finish to close the Add Standard TCP/IP Printer Port Wizard dialog box. 44
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
9. Click Have Disk in the dialog box displaying lists of manufacturers and printers.
10. Insert the User Software (Drivers) DVD into the DVD drive, type the name of the DVD drive (for example, D:\), and then click Browse. Browse to the English\Prntdrvr\Ps_drvr\Win_2K_XP_VISTA folder. For PCL printer driver, browse to the English\Prntdrvr\Pcl6_drvr\Win_2K_XP_VISTA folder. If you are installing from the files you downloaded from the Fiery E10 using the Downloads tab in WebTools, browse to prntdrvr\Prntdrvr\Ps_drvr\Win_2K_XP_VISTA or prntdrvr\Prntdrvr\Pcl6_drvr\Win_2K_XP_VISTA and click Open.
11. Make sure that “oemsetup.inf” or “oemsetup” is selected and click Open. The path is copied to the Install from Disk dialog box.
12. Verify that the path is correct and click OK.
13. In the Printers box, select the Fiery(eu) printer driver as your printer and click Next.
45
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
14. Type a name for the Fiery E10 in the Printer name field, indicate whether you want to make it the default printer, and then click Next.
15. Follow the on-screen instructions. Do not share the printer and do not print a Test Page at this time. Continue with the printer driver installation and at the last screen, click Finish. The necessary files are installed on your hard disk. When installation is complete, the Printers window appears with an icon for the newly installed printer.
46
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
A2: Install fiery printer driver for Mac OS TO DOWNLOAD PRINTER DRIVER FILES WITH WEBTOOLS 1.
Start your Internet or intranet browser and type the DNS name or IP address of the Fiery.
2.
Click the Downloads tab.
3.
Click the link for the printer drivers that you want to install (Printer Files for Mac OS X). A file named OSX.dmg is downloaded to your desktop. The file contains a folder named Printer Driver in a compressed format. If your Internet browser is equipped with an expander utility, such as StuffIt Expander, the folder decodes and decompresses automatically. If the Printer Driver folder does not automatically decode and decompress, double-click the file to start the utility that performs that function.
4.
Open the OSX : Printer Driver folder.
5.
Double-click the OSX Installer icon to start installing the printer driver. Follow the on-screen instructions to complete the installation.
Setting up Printing with MAC OS 1
Choose System Preference from the Apple menu and then choose Print & Fax. (The Print & Fax dialog box appears.)
2
Click the “+” button to add a printer
3.
Click the IP icon in the dialog box
4. Type Fiery IP Address in the Address Field 5. Type the print connection (print, hold or direct) in the Queue field. 6. Choose “Select a driver to use” from the Print Using menu. 7. Type Fiery in the search filter to narrow the search, and then select the PPD file from the list. 8. Click Add. 9. Select the options are installed on the machine 10. Click Continue.
47
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Part B: Printer driver setting Select Printer and setting in Windows:
Select Printer and setting in Mac OS
1. Choose Print in your application.
1. Choose Print in your application. Click OK
2. Select the Fiery printer and click Properties.
2. Choose the Fiery printer as your printer
3. Click the Fiery Printing tab.
3. Choose Fiery Features from the drop down list 4. Click Full Properties
B1: Customizing the Basic icon The Basic icon is on the Fiery Printing tab. You can customize it with the print options you use frequently.
1.
Select Basic
2.
Select Customize
3.
Add options to current shortcut
48
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
B2: Job Info
1.
Print Queue Action: Select [Process and Hold] to process, but not print a job, Select [Print and Hold] to save the file after printing
2.
User Authentication: If the copier is configured to require user authentication for printing, enter your user name and password in these fields or click I’m a Guest for public account.
3.
Account Track: If Account Track is enabled on the copier, please tick [Account track] and enter Account name in [Department Name] field and password in [Account password] fields.
4.
Secure print: Type secure print ID in the [Secure Print ID] field and secure print password in [Job password] field] if you are sending a secure print job.
49
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
B3: Media options
1.
Document size: page size defined in your application
2.
Paper Size: Defines the output size
3.
Paper Type: Choose the paper type for print job
4.
Paper Tray: Specify the paper tray to use for the print job
5.
Mixed Media: Define the chapter divisions of a print job and to print certain pages or ranges of pages on varying types of medias.
6.
Tray Alignment: To adjust the image on the page to achieve alignment on both sides of page when printing duplex.
7.
Transparency interleaving: specify ON to insert transparent interleave.
8.
Front/Back cover: Specify if you want to print a front cover at the beginning of your print job.
9.
Front /Cover Tray: Specify the paper source tray for the front/back cover.
50
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
B4: Layout Option
1.
Scale: Specify an increase or decrease in the scale of your print job.
2.
Scale to Fit: Specify whether to scale your job to fit to a paper size.
3.
Orientation: Use this option to specify the orientation of the document
4.
Pages per sheet: specify the number of document pages per sheet of paper
5.
Duplex: Specify left binding or right binding for duplex printing
6.
Print Border: Select ON to print borders around each page in your print job.
7.
Booklet: Arrange the pages of job to booklet order
8.
Gang-up print: Two speed-printing options below.
Cut & stack
Step & repeat
51
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
B5: Color Option
1.
CMYK:
for a full-color document
2.
Grayscale:
for a grayscale or black and white
document 3.
Composite Overprint: Select ON to overprint objects that are specified in the source PostScript or PDF file.
4.
Combine Separations: When printing separations from supported desktop publishing applications: select ON to combine separations on a single page
5.
Auto Trapping: Specify whether the job should automatically reduce white gaps for text and graphics
6.
Substitute Colors: Select ON to use the substitute Color Values defined in the Spot-On module.
B6: Image Option
1. Image Smoothing: Select ON to minimize grainy output when printing low-resolution images.
2. Brightness: lighter or darker image 3. Image Quality: Specify the type of image quality for the job
4. Edge enhancement: Select ON to enhance the sharpness of the edge of halftone/gray text and vector graphics.
5. Gross Print: To gloss the printing like a photograph 6. Screen Pattern: specify a screen pattern for the job
52
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
B7: Finishing Option
1.
Fold: Specify how to fold your print job(Optional Parts is needed)
2.
Collate: specify how to output multiple-page/copy jobs
3.
Punch Holes: Specify punch two or three holes hen you have a punch holes option(Optional Parts is needed)
B8: Finishing Option 1.
Create Master: to create master from this job, specify a number to assign the master file
2.
Use Master: For variable data print job, specify master number to be used for the job
3.
Preview Master: Click to generate image of your master page.
B9: Stamping Option Watermarks: Select Standard Text for watermark from the pull down menu
53
-
To Create your own watermark, click New
-
To Modify a standard watermark
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Part C: Command WorkStation Command WorkStation, the job management software for Print Server environments, is designed to make centralized print job management easy. Command WorkStation is used by operators and administrators who must track and manage jobs and oversee general job flow through the Print Server. The following job management features are available:
Editing and merging job files
Monitoring activity on the Print Server and controlling job flow
Viewing and overriding user-defined print option settings
Tracking job activity through the Job Log
C1: Install Command WorkStation TO DOWNLOAD CLIENT SOFTWARE FILES WITH WEBTOOLS 1.
Start your Internet or intranet browser and type IP address of the Fiery
2.
Click the Downloads tab.
3.
Click the link for the item that you want to install. For Windows/Mac OSX Client Software Installer, click the Files link under the Windows heading.
4.
If a dialog box prompts you to open the file or save it to disk, choose to save it to disk.
5.
Browse to the location where you want to save the file and click Save. The file is downloaded from the Fiery. This compressed file is an archive that contains multiple files.
6.
54
Double-click downloaded file to install
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Command Workstation 4 C2: RUN and Logging on/off Command Workstation Run Command Workstation 4: StartAll ProgramsFieryCommand Workstation 4
Logging on/off the Print Server 1.
Choose Server > Log in/Log out.
2.
Click the key icon for the connected Print Server in the server list. Administrator: Has full access to all command workstation and server control panel functions: default password is “Fiery.1” Operator: Has full access to all command workstations, expect accessing setup, changing passwords and delete job log. Guest: Can download and view job status, edit preferences, change layouts, but cannot access to job log, make changes to jobs or setup
55
3.
Input password > Log In
4.
Click Log in/Log out again and Yes to log off and disconnect the Print Server.
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Monitoring job status
Frequently used commands
C3: Monitoring job status Spooling: The job is currently spooling at the Print Server. Spooled/Held: The job is spooled to the Print Server and is being held pending further instruction. Waiting to process: The job has moved from hold status and is waiting to be processed by the Print Server. You can change the priority of jobs that are waiting for processing time. Processing: The job is being RIPped for printing. Processed/Held: The job RIPped and the status changed to hold instead of being sent to the Print queue. The job does not need to be processed again but can be printed directly or archived. Waiting to print: The job RIPped and is queued for printing by the output device. Printing: The job is currently printing and will move to the Printed Jobs panel when completed.
C4: Frequently used commands -
Print - sends a job to print.
-
Hold - Hold queue for later printing.
-
Process and Hold - RIPs a job and returns it to the Hold queue for later printing.
-
Delete - Delete the selected job.
-
Archive - archives selected jobs from the print queue.
-
Preview - opens a Preview window containing thumbnail previews for the job.
-
Properties - opens the Job Properties window. For more information about the Properties command. e.g. Duplex /color mode/collate setting etc.
56
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
C5: Reprinting jobs
1. In the Printed Jobs panel, right-click a job and choose Hold or Process and Hold
2. Right-click a Held job and click print
C6: Job Log 1.
To view the Job Log: Click the Job Log tab at the bottom of the Command WorkStation window.
2.
To manually clear the Job Log: Choose Server > Clear Server, select Job Log in the list, and click OK.
3.
To export the contents of the Job Log: Choose Server > Job Log > Export.
4.
To export and clear the contents of the Job Log: Choose Server > Job Log > Export and Clear.
57
Konica Minolta Business Solutions (HK) Ltd. Room 208, 2/F., Eastern Centre, 1065 King’s Road, Quarry Bay, Hong Kong. Tel: (852) 2565 8181 FAX: (852) 2565 761
Supplementary Notes
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Supplementary Notes
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
部門熱線Particulars 市務科 Marketing Division Ø 銷售熱線Sales Hotlines • 查詢產品及銷售詳情 New Product and Sales Enquires
聯絡方法Contact us
電話Tel : 2565 2111 電郵Email :
[email protected]
服務科 Technical Service Division Ø 維修熱線Repair Hotline • 多功能產品之維修服務 MFP Repair Services
電話Tel : 2565 2176 傳真Fax : 2856 1024
服務科 Technical Service Division Ø 產品之技術支援熱線 • 軟件及網絡支援 Application, Network and System Support
電話Tel : 2565 2178
客戶服務Customer Service Department Ø 客戶服務熱線 Customer Service Hotlines • 保養合約查詢 Maintenance Agreement • 新客戶之產品培訓 New Customer Product Training • 賬單查詢 Invoice Enquiries • 報錶 (請於報錶結算日前報讀。) Report meter reading through telephone system (Please report meter reading on or before cut-off date) 客戶服務 Customer Service Department Ø 用品供應熱線 Order Section Hotlines • 訂購消耗品如碳粉及影印紙 Ordering of Consumable Products (Toners, Paper, etc…)
電話Tel : 2565 2190 傳真Fax : 2565 2128 電話Tel : 2856 4306 電話Tel : 2565 8181 English - Press “2”, then press “2”, 中文 - 按 “1” 字然後按 “2”字 傳真Fax : 2856 2008 電郵Email :
[email protected] 電話Tel : 2565 2139 傳真Fax : 2565 7613 電郵Email :
[email protected]
財務科 Finance Division Ø 月結單查詢 Statement Enquiries
電話Tel : 2856 4710 傳真Fax : 2516 9177
行政科 Administration Department Ø 客戶的建議及意見反映 Other Suggestions & Comments
電話Tel : 2565 8181 按Press “ 0 ”
網上客戶服務 Online Support Services
http://www.konicaminolta.hk/hk/zh-hk/customer-services.php http://www.konicaminolta.hk/hk/en-us/customer-services.php
