Transcript
Quick reference guide Konftel 60W Connection to system phone via cable English
Konftel is a leading company within loudspeaker communication and audio technology. We develop and sell products and technology for telephone meetings based on cutting-edge expertise within acoustics and digital signal processing. Characteristic of our products is that all conference telephones contain the same high quality audio technology – OmniSound® – providing crystal clear sound. Learn more about Konftel and our other products on www.konftel.com.
Developed by Konftel AB Box 268, SE-901 06 Umeå, Sweden Phone: +46 90 706 489 Fax: +46 90 131 435 E-mail:
[email protected] Web: www.konftel.com
3109 ENG rev A
Conference phones for every situation
Connection to a system phone with cable
Quick reference guide Konftel 60W
OVERVIEW
GSM
Loudspeakers, x3
DECT
Microphone, 360o sound pick-up
LEDs Blue – microphone on Red – microphone muted
BUTTONS
CONNECTION Power supply 230 V / 120 V Handset System phone Connection cable power, 6 m Connection cable line 3 m
On/off button Transfer the call from your system phone to the Konftel 60W
- button Decrease the speaker volume
Mute button Briefly press – mute
+ button Increase the speaker volume
Trim button When you want to tune your Konftel 60W manually.
Switchbox incl 0.5 m cable MULTIPARTY CALLS
Underside of the Konftel 60W
Only mains transformer of types Helms-Man DEN4824129, DPX481821 (USA) or DBN4824129 (UK) may be connected. OPTIMISING MICROPHONE VOLUME
When the Konftel 60W is connected to your systemphone, it functions as a conference phone. It can only perform multiparty calls on a properly configured enterprise phone network or when multiparty calls are placed through a conference bridge or a bridging service. Please contact your telephone system administrator for further details.
ANSWERING A CALL Lift the handset and press the On/off button. Your call will be transferred from the handset to the Konftel 60W.
MAKING A CALL Make a call and put the handset to one side.
Adjust the microphone volume when you install the unit to ensure optimum sound quality.
Switch to loudspeaker by turning on your Konftel 60W.
2 sec.
Connect a call and press the Mute button for 2 seconds until the LEDs start flashing.
ENDING A CALL To end a call, replace the handset and press the On/off button to end a call.
and
Adjust the microphone volume, one step at a time, until you achieve optimum sound quality. Note that if the level is too high, it may cause echoes. Press the Mute button to save the volume settings. For other functions and information, please refer to your Konftel 60W User Guide on www.konftel.com
6
7