Preview only show first 10 pages with watermark. For full document please download

Kpc641 3k Instruction Manual

   EMBED

Share

Transcript

KPC641 3k Instruction Manual Specification Capacity:500g-0.1g/100g-0.01g/200g-0.01g/300g-0.01g etc Display: 5 Digital &6 Digital LCD Display Back light: Blue backlight, it can be choose 0 or 5*240 seconds auto power off time. Auto power-off: 500g-0.1g/100g-0.01g static operate 60s auto power off Auto power-saved function:（only for 6 digital LCD display auto power off time 0.2.5.8 minutes for chosen； Display units:(500g-0.1g/100g-0.01g)g/ct/oz/tl； Display Units:( only for 6 digital LCD display):g/ct/oz/ tl/ dwt/gn 6 units for chosen； Battery:6*AA batteries； The size of product:215*150*42mm； Key Fonction ON/OFF: turn on & turn off press ON/off key for one time UNIT: press unit key change each units TARE: In order to subtract the weight of vessel or container, press Z/T key. PCS: press one time to count during weighing. Calibration and the setting of parameter (only for 6 digital LCD display) “ON/OFF»: confirm “UNIT”: choose and value “TARE”: shift and devalue “MODE»: Exit Counting Mode Tare Function (1) Put a empty container on the platform till steady then press “tare”. The LCD will display “0” and the remark of tare. Move the empty container and press “tare” again, the function of tare will be canceled. (2) The range of tare: the full capacity Auto-zero (1) Press “ZERO” if the scale can’t display 0 without weighing. (2) The range of auto zero: （ }２%）X full capacity Counting Mode Put something on the platform, press “PCS” one time to counting. The LCD will display 25, 50, 70, 100(press unit key to change). Press”PCS” again to confirm the percentage of samples then begin to count. Calibrate Press “MODE” for three seconds, it will display “CALL”, put correct weights ,display “pass”, then finished.