Kramer New Product Directory

Transcript

KRAMER NEW PRODUCT DIRECTORY 2016-2017 www.KramerAV.com TABLE OF CONTENTS I COLLABORATION VIA Campus Wireless Presentation and Collaboration for Education and Training ........................................... 4 VIA Pad VIA Step−in Touch Pad .................................................................................................................................................. 4 VIA Pocket VIA Pad Holder ........................................................................................................................................................... 4 I DISTRIBUTION AMPLIFIERS VM-4HDT 1:4 4K UHD HDMI to HDBaseT Distribution Amplifier ................................................................................ 5 I SWITCHERS & ROUTERS DIP-20 4K UHD HDMI & Computer Graphics with Ethernet, Bidirectional RS−232, IR & Stereo Audio over HDBaseT Transmitter & Step−In Commander.......................................................................... 5 DIP-30 4K UHD HDMI & Computer Graphics Automatic Video Switcher .................................................................. 6 VS-44DT 4K UHD HDMI/HDBT Matrix Switcher .................................................................................................................. 6 VS-62HA 6x2 4K UHD HDMI/Audio Automatic Matrix Switcher ................................................................................... 7 WP-20 Active Wall Plate − 4K UHD HDMI & Computer Graphics with Ethernet, I SCALERS VP-439 HDMI, PC and CV to HDMI Classroom Switcher / Scaler ................................................................................ 17 VP-440 Compact 6−Input Presentation Switcher / Scaler with HDBaseT and HDMI Outputs ........................ 17 VP-558 11x4:2 Presentation Boardroom Router / Scaler System............................................................................... 18 VP-734 7−Input 4K UHD Presentation Switcher / Scaler................................................................................................. 18 VP-796 HQUltra 9−Input 4K UHD HDBaseT and Legacy Presentation Switcher / Scaler with Ultra-Fast Input Switching.................................................................................................................................................... 19 I CABLES & CONNECTORS CLS-AOCH/XL Active Fiber Optic High−Speed HDMI Cable with Detachable Connectors ............................. 19 CP-AOCH/XL Plenum Rated Active Fiber Optic High−Speed HDMI Cable with Detachable Connectors ..... 20 C-UA/LTN Lightning to USB Sync & Charge Cable ........................................................................................................... 20 C-MDP/DPM Mini DisplayPort to DisplayPort Cable ..................................................................................................... 21 C-A63M/XLM 6.3mm Male to 3−pin XLR Male Cable .................................................................................................... 21 Bidirectional RS−232 & Stereo Audio over HDBaseT Transmitter .................................................................................. 7 C-SC/SC/OM4 OM4 Multi−Mode Fiber Optic Cable ....................................................................................................... 21 DGKat-IN8-F64/DGKat-OUT8-F64 8−Input/8−Output HDMI & RS−232 over DGKat Card .......................... 8 F670-IN8-F64/F670-OUT8-F64 8−Input/8−Output HDMI over OM3 Fiber Cards ............................................ 8 HAA-IN4-F32/HAA-OUT4-F32 4−Input/4−Output HDMI with Analog Audio Cards ........................................ 8 HS-OUT2-F16 2−Output HDMI Scaler−Switcher Card...................................................................................................... 8 SDIA-IN2-F16 2−Input SDI with Analog Audio Card ........................................................................................................ 9 BCLS-11 CAT 5E U/UTP LSZH Bulk Cable ............................................................................................................................. 21 I CONTROL SYSTEMS EventBoard Cloud−Based Room Scheduling and Meeting Management Application....................................... 9 FC-28 Ethernet to Serial, IR, GPI/O & Relay Port Controller .......................................................................................... 10 RC-43SL 6−Button Room Controller ...................................................................................................................................... 10 BCLS-45 CAT 7 S/FTP LSZH Bulk Cable ................................................................................................................................. 23 I FORMAT & STANDARDS CONVERTERS FC-69 HDMI Audio Embedder/De−Embedder .................................................................................................................... 11 WU3-AA USB 3.0 (A/A) Wall Plate Insert................................................................................................................................. 24 I RANGE EXTENDERS & REPEATERS 691/692 HDMI, Audio, USB 2.0, Bidirectional RS−232, ETH & IR HDBaseT 2.0 over RK-COLLAGE Rack Adapter for VIA Collage ....................................................................................................................... 24 Fiber Optic Transmitter & Receiver ........................................................................................................................................... 11 PT-101UHD 4K UHD HDMI Repeater ................................................................................................................................... 12 PT-1Ci HDMI Isolator .................................................................................................................................................................... 12 TP-590TXR/TP-590RXR 4K UHD HDMI HDBaseT Line Transmitter/Receiver .................................................... 13 I SPECIALTY AV PRODUCTS & SOLUTIONS Kramer Network AV over IP Enterprise Management Platform ............................................................................. 13 KDS-MP2 HD Digital Signage Media Player ........................................................................................................................ 14 KDS-MP4 4K UHD Digital Signage Media Player .............................................................................................................. 14 KW-14 Expandable Wireless HD Transmitter & Receiver .............................................................................................. 15 PSE-1 10Gb UHD Power Over Ethernet Injector ................................................................................................................ 15 PSE-2 10Gb UHD Power Over Ethernet Injector ................................................................................................................ 16 PSE-4 10G Quad POE Injector ................................................................................................................................................... 16 BCLS-21 CAT 6 U/UTP LSZH Bulk Cable ................................................................................................................................ 22 BCLS-23 CAT 6 F/UTP LSZH Bulk Cable ................................................................................................................................. 22 BCLS-31 CAT 6A U/UTP LSZH Bulk Cable ............................................................................................................................. 22 BCLS-33 CAT 6A F/UTP LSZH Bulk Cable .............................................................................................................................. 22 I ROOM CONNECTIVITY UTBUS-2XL Under−the−Table Modular Connection Bus ............................................................................................. 23 WU-2AA 2 x USB 2.0 (A/A) Wall Plate Insert ........................................................................................................................ 24 I MOUNTING & RACK ADAPTERS I AUDIO Galil 2-C 2.5−Inch Closed−back Ceiling Speakers ............................................................................................................. 25 Tavor 6-O 6.5−Inch, On−Wall 2−Way Powered Speakers.............................................................................................. 25 FC-404Net 4X4 Dante Interface .............................................................................................................................................. 26 KADS-2 Controllable Powered Speaker ................................................................................................................................ 26 NEW PRODUCT DIRECTORY I 2016 3 I COLLABORATION VIA Campus Wireless Presentation and Collaboration Device for Education and Training VIA Pad VIA Step−in Touch Pad VIA Campus offers advanced collaboration and engagement tools that enhance interactive learning in Education and Corporate Training environments. From any laptop or mobile device, students and teachers can view the main display, edit documents together in real time, share any size file, turn the main display into a digital whiteboard, and more. VIA Campus also lets teachers use e-polling and e-exams to easily and instantly measure how much students are actually learning. VIA Campus can show up to six user screens on one main display or up to 12 screens on two displays. The solution features iOS mirroring for MacBook, iPad and iPhone and Android mirroring (Lollipop OS 5.0 or newer). Remote students can easily join the class and collaborate in real time with embedded 3rd-party video conferencing and office apps. The VIA Pad is an optional step-in/step-out touch pad accessory for the VIA product line. It allows the user to easily share his/her laptop screen on the VIA equipped meeting room display. FEATURES ●● Easy Plug and Play Connection - Over standard USB. ●● Status LED Ring - Indicates active, standby, pause and do not disturb status. ●● PC System Compatibility - Mac and Windows 7/8/10. ●● VIA Compatibility - Ver 1.8 and onwards. FEATURES ●● Wireless Connection - Connect wirelessly with your own device. No dongle needed. ●● iOS and Android Mirroring - Mirror any content from your Android device on the main display. Mirror Apple MacBooks and iOS devices without the need to download any additional software. ●● Multimedia - Share uninterrupted full HD wireless video streaming (up to 1080p60) and photos. ●● Cloud-Based - Drag and drop files to the Cloud to share instantly with other users. ●● Start Collaboration - Click to collaborate through a common display. Multiple users can edit and control what’s happening on the main display at the same time. ●● File Sharing - Share files with one or several participants. ●● Whiteboard - Annotate, illustrate and edit shared documents with any regular or touch-panel device. ●● Enable Control - Give a participant control over a presenter’s MAC® or PC laptop. ●● Chat - Send an instant message to another user. ●● Web Browser - Open any browser to display content from a Web site. ●● View Main Display - View the main display on your own device. ●● Third-Party Apps - Support for office and conferencing applications, such as Microsoft Office®, Skype®, GotoMeeting®, Lync®, and WebEx®. ●● 4K UHD - Present 4K UHD content to compatible 4K UHD displays. ●● e-Polling - Conduct surveys of student knowledge and opinion to enhance the learning experience. ●● e-Exam - Offer interactive, multimedia tests with instant feedback for students. ●● Do Not Disturb Mode (DND) - On-the-fly moderator support. Enable DND and no one can interrupt your presentation until you disable it. ●● Multilingual Support - Experience VIA in your language. ●● Warranty - 3 years hardware, 1 year software. 4 NEW PRODUCT DIRECTORY I 2016 VIA Pocket VIA Pad Holder The VIA Pocket stand elegantly stores your VIA Step-in touch Pads. FEATURES ●● Capacity - Holds up to 6 VIA Pads. ●● Dimensions - 22.0cm x 13.4cm x 21.7cm (8.7" x 5.3" x 8.6") W, D, H (empty). I DISTRIBUTION AMPLIFIERS I SWITCHERS & ROUTERS VM-4HDT 1:4 4K UHD HDMI to HDBaseT Distribution Amplifier DIP-20 4K UHD HDMI & Computer Graphics with Ethernet, Bidirectional RS−232, The VM-4HDT is a high-quality 1:4 4K UHD HDMI to HDBT distribution amplifier that takes one HDMI input, equalizes and reclocks the signal and distributes it to four identical HDBT outputs. The VM-4HDT distributes signals having resolutions of up to 4K and including WUXGA and 1080p. The DIP-20 is an 4K UHD HDBaseT transmitter and step-in commander for computer graphics video, HDMI, unbalanced stereo audio signals embedding and de-embedding. The DIP-20 accepts an HDMI and PC graphics video input, an Ethernet signal, serial data, and an unbalanced stereo audio input (which is embedded into the output signal), and transmits the signal via HDBaseT (twisted pair) cable to a compatible receiver (for example, the TP-588D or the TP-580RXR). The DIP-20 is a PoE (Power over Ethernet) provider and can power compatible PoE acceptors, (for example, the TP-588D and the TP-590RXR). FEATURES ●● Maximum Data Rate - 10.2Gbps (3.4Gbps per graphic channel). ●● Max. Resolution - Up to 4K UHD and WUXGA, including 4K @60Hz (4:2:0). ●● HDMI Support - 3D, Deep Color, x.v.Color™, 3D. ●● HDCP Compliance - Sources that support HDCP output HDCP protected content. IR & Stereo Audio over HDBaseT Transmitter & Step−In Commander FEATURES ●● Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel). ●● Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel ●● Max. Resolution - Up to 4K UHD and WUXGA, including 4K @60Hz (4:2:0). ●● ●● HDCP Compliant - Works with sources that support HDCP repeater mode. ●● ●● ●● ●● longer distances. I-EDIDPro™ Kramer Intelligent EDID Processing™ - An intelligent EDID handling and processing algorithm that ensures Plug and Play operation for HDMI systems. Default EDID - For fast and efficient connection. 3D Pass-Through. Range - 70m (230ft). Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter. ●● HDTV Compatible. ●● HDMI Support - Deep Color, x.v.Color™ and 3D. ●● Automatic Live Input Detection - Based on video clock presence. ●● Automatic Input Selection - Based on manual selection or last connected input. ●● Automatic Analog Audio Detection & Embedding. ●● I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. ●● Data Equalization and Reclocking. ●● Local Balanced Audio De-Embedding. ●● Support for Digital Audio Formats. ●● Lockable EDID. ●● System Range - Up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K); up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC-HDKat6a cables. ●● Local Step-In Switching - Button & contact closure. ●● Power Supply - Supports PoE to power a remote receiver (such as TP-588D). Requires independent power supply. ●● Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter. NEW PRODUCT DIRECTORY I 2016 5 I SWITCHERS & ROUTERS (CONTINUED) DIP-30 4K UHD HDMI & Computer Graphics Automatic Video Switcher VS-44DT 4K UHD HDMI/HDBT Matrix Switcher The DIP-30 is an automatic switcher for HDMI, VGA, Ethernet, data and unbalanced audio signals. The unit supports various modes of input selection and transmits the signal via HDMI cable to a compatible receiver (for example the VS-62H or when connecting directly to a display/projector). The DIP-30 is a step-in commander when connected to matrix switcher supporting Step-in over HDMI such as the VS-62H. The VS-44DT is a 4K UHD HDMI/HDBT matrix switcher for HDMI, HDBaseT and IR signals. The unit accepts up to four HDMI and IR inputs and routes any or all of them to any or all of four HDMI or HDBaseT and IR outputs for connection to compatible HDBaseT receivers, for example, the TP-580RXR and TP-588D. FEATURES FEATURES ●● Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel). ●● Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel). ●● Max. Resolution - Up to 4K UHD and WUXGA, including 4K @60Hz (4:2:0). ●● Max. Resolution - Up to 4K UHD and WUXGA, including 4K @60Hz (4:2:0). ●● HDTV Compatible. ●● HDTV Compatible. ●● HDCP Compliant - With sources that support HDCP repeater mode. ●● HDCP Compliant. ●● HDMI Support - Deep Color, x.v.Color™ and 3D. ●● EDID Capture - Copies and stores the EDID from a display device. ●● Automatic Live Input Detection - Based on video clock presence. ●● System Range - Up to 130m (430ft) in normal mode (1080p@60Hz @36bpp) and up to 180m ●● Automatic Input Selection - Based on priority selection or last connected input. ●● Manual Input Selection. ●● Step-in Support. ●● Automatic Analog Audio Detection & Embedding. ●● Convenient Control - Via Kramer Protocol 3000 and embedded Web pages over a LAN. ●● I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. ●● Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter. (590ft) in extended range mode (1080p@60Hz @24bpp) when using BC-HDKat6a cables. ●● HDMI Support - 3D, Deep Color, x.v.Color™, Lip Sync, Dolby® TrueHD, Dolby Digital Plus, DTS- HD® and 7.1 multi-channel audio. ●● PoE Support - PoE provider to receivers such as the TP-588D. ●● Non-Volatile Memory - Stores and recalls preset matrix configurations. ●● Automatic Output Shutdown - If no input signal is detected after a configurable idle period. ●● Kramer Protocol 3000 Support. ●● Lock Button - Prevents unwanted tampering with the settings. ●● Flexible Control Options - Embedded Web server, RS-232, IR remote (included). ●● Worldwide Power Supply - 100-240V AC. ●● Standard 19" (1U). Rack "ears" included. 6 NEW PRODUCT DIRECTORY I 2016 VS-62HA 6x2 4K UHD HDMI/Audio Automatic Matrix Switcher WP-20 Active Wall Plate − 4K UHD HDMI & Computer Graphics with Ethernet, The VS-62HA is a high quality, 6x2 matrix switcher for HDMI and analog audio signals. It reclocks and equalizes the signals and can route any input to either or both outputs simultaneously. The WP-20 is an 4K UHD HDBaseT active wall plate auto switcher for HDMI, VGA and analog audio signals that supports 4K UHD resolution. The device has EDID management, various control options and audio embedding. The unit is a fully-featured auto-switcher with the convenience and simplicity of a wall plate. The WP-20 is easy to configure, can be powered remotely over Ethernet (PoE) and is designed for any size room. FEATURES ●● Max. Data Rate - 8.91Gbps data rate (2.97Gbps per graphics channel). ●● Max. Resolution - Up to 4K UHD and WUXGA, including 4K @60Hz (4:2:0). ●● HDCP Compliant. Bidirectional RS−232 & Stereo Audio over HDBaseT Transmitter FEATURES ●● HDMI Support - 3D, Deep Color, x.v.Color™, Lip Sync , ARC, HEAC pass-through, Dolby® ●● Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel). ●● ●● HDTV Compatible. ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● TrueHD, Dolby Digital Plus, DTS-HD®, and 7.1 multi-channel audio. EDID Capture - Copies and stores the EDID from a display device. Advanced Auto AV Switching Option - For either or both outputs, last-connected or priority switching, manual override mode to allow intuitive controller-free operation. Audio Routing - Independent (breakaway) audio routing of embedded HDMI and analog audio content to two balanced audio ports. Programmable Step-In over HDMI Functionality - When used in conjunction with compatible step-in devices, such as the SID-X3N and DIP-30 (using an HDMI cable that supports HEC, the HDMI Ethernet Channel). True Video Clock Detection. Non-Volatile EDID Storage. Kramer reKlocking™ & Equalization Technology - Rebuilds the digital signal to travel longer distances. Lock Button - Prevents unwanted tampering with the front panel. Internal Pattern Generator. Embedded Web Pages - Provide remote configuration and operation. Static or Dynamic DHCP IP Addressing. Flexible Control Options - Front panel buttons, IR remote (included), optional external remote IR receiver, RS-232, Ethernet, buttons and LED over contact closure, embedded Web server, Kramer Protocol 3000 support. USB Port - For upgrading firmware. Standard 19" (1U). Rack "ears" included. ●● Max. Resolution - Up to 4K UHD and WUXGA, including 4K @60Hz (4:2:0). ●● HDCP Compliant - Works with sources that support HDCP repeater mode. ●● HDMI Support - Deep Color, x.v.Color™ and 3D. ●● Automatic Live Input Detection - Based on video clock presence. ●● Automatic Input Selection - Based on manual selection or last connected input. ●● Automatic Analog Audio Detection & Embedding. ●● I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. ●● Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances. ●● Range - Up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K); up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC-HDKat6a cables. ●● Lockable EDID. ●● Flexible Control Options - Via Kramer Protocol 3000, Ethernet and embedded Web pages over RS-232. ●● Digital Audio Format Support. ●● Size - Wallplate. NEW PRODUCT DIRECTORY I 2016 7 I SWITCHERS & ROUTERS (CONTINUED) DGKat-IN8-F64/DGKat-OUT8-F64 8−Input/8−Output HDMI & RS−232 over DGKat Card DGKat-IN8-F64 and DGKat-OUT8-F64 are eight-channel HDMI and RS-232 over DGKat twisted pair input/output cards for the VS-6464DN Modular Multi-Format Digital Matrix Switcher. The DGKat-IN8-F64 inputs eight HDMI and RS-232 signals to the chassis. The DGKat-OUT8-F64 outputs eight HDMI and RS-232 signals from the chassis. HAA-IN4-F32/HAA-OUT4-F32 4−Input/4−Output HDMI with Analog Audio Cards HAA−IN4−F32 and HAA−OUT4−F32 are four−channel HDMI with analog audio input and output cards for the VS−3232DN Modular Multi−Format Digital Matrix Switcher. The HAA−IN4−F32 inputs four HDMI signals with optional embedding of unbalanced stereo audio to the chassis. The HAA−OUT4−F32 outputs four HDMI signals with de−embedding of unbalanced stereo audio from the chassis. FEATURES ●● Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel). FEATURES ●● HDCP Compliant. ●● Analog Audio Embedding/De-embedding. ●● Range - 70m (230ft). ●● Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel). ●● HDTV Compatible. ●● HDCP Compliant. ●● HDMI Support. ●● 3D Pass-Through. ●● Kramer Equalization and re-Klocking Technology. F670-IN8-F64/F670-OUT8-F64 8−Input/8−Output HDMI over OM3 Fiber Cards F670−IN8−F64 and F670−OUT8−F64 are eight−channel HDMI over OM3 fiber input and output cards for the VS−6464DN Modular Multi−Format Digital Matrix Switcher. The F670−IN8−F64 inputs eight HDMI signals over OM3 fiber optic cable to the chassis. The F670−OUT8−F64 outputs eight HDMI signals over OM3 fiber optic cable from the chassis. FEATURES ●● Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel). ●● Range - 1.4km (4600ft). ●● HDCP Compliant. HS-OUT2-F16 2−Output Scaler−Switcher Cards HS−OUT2−F16 is a two−channel HDMI scaler card for the VS−1616D modular multi−format digital matrix switcher. The card scales each output signal separately to a set resolution, aspect ratio and color depth according to the native requirements of the screen or to a user setting. The scaling ensures ultra−fast switching by eliminating dependency on the display’s scaling capabilities while keeping a constant output signal. In addition, it features immediate (between frame) cut switching between both ports on the same card to give the VS−1616D live−events switching/ scaling capability. FEATURES ●● Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel). ●● Scaled Output. ●● HDMI, HDCP, EDID Support. ●● Immediate Frame-to-Frame Switching Support. 8 NEW PRODUCT DIRECTORY I 2016 I CONTROL SYSTEMS SDIA-IN2-F16 2−Input SDI with Analog Audio Card EventBoard Cloud−Based Room Scheduling and Meeting Management Application SDIA−IN2−F16 is a two−channel SDI input card with an analog audio embedding option for the VS−1616D Modular Multi−Format Digital Matrix Switcher. The SDIA−IN2−F16 inputs two SDI with optional unbalanced stereo audio signals into the chassis and converts each SDI signal separately into HDMI format for routing within the matrix switcher. FEATURES ●● Max. Data Rate - 3Gbps. ●● Multi-Standard Operation - SDI, HD−SDI, 3G HD−SDI. ●● Stereo Audio Embedding. EventBoard is a cloud-based, room scheduling and meeting management platform. The user-friendly touch device application significantly improves utilization of meeting spaces and their effective management. FEATURES ●● Simplified Meeting Scheduling and Space Booking. ●● Easy Meeting Search for Employees & Guests. ●● Customized Scheduling Displays. ●● Meeting Space Activity Analytics - For asset managers to analyze meeting space availability and utilization figures, meeting attendance and equipment usage. NEW PRODUCT DIRECTORY I 2016 9 I CONTROL SYSTEMS (CONTINUED) FC-28 Ethernet to Serial, IR, GPI/O & Relay Port Controller RC-43SL 6−Button Room Controller The FC-28 is a bidirectional RS-232, IR control, GPI/O and relay control signal converter to Ethernet. Two RS-232, four IR, two GPI/O and two relay controllable devices can be controlled via an Ethernet or LAN connection. The RC-43SL is a 6-button room controller for multimedia rooms, with optional extended remote control panel over K-NET. It controls audio and video components and other room facilities such as lights and screens - in any room via its Ethernet, RS-232, IR and relay control ports. FEATURES ●● Ports - 2 RS-232, 1 Ethernet, 4 IR emitters, 1 IR learning, 2 GPI/O, 2 relays. FEATURES ●● Simultaneous Communication - With up to 40 PC clients. ●● 6 Touch-Sensitive, Back-lit Buttons. ●● USB Port - For technical service, including firmware upgrades. ●● 2 Bidirectional RS-232 Ports - For controlling AV equipment such as projectors, LCD and PDP ●● Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter. displays, power amplifiers, switchers and scalers. ●● 3 Relay Contact Closure Ports - For controlling other room items such as raising and lowering drapes, the screen or the projector. ●● IR Control - 2 outputs (terminals blocks), 1 sensor. ●● IR Learning - Learns commands from any IR remote. ●● Kramer Site-CTRL™ Compatibility - For network management and remote control over the Ethernet port. ●● Configures with Kramer K-Config Software. ●● K-NET™ Control Channel - For connecting compatible user interfaces and supplying power and control data over a single cable. ●● USB Port - For loading firmware upgrades. ●● Flexible Control - Using Ethernet, K-NET™, IR sensors and external IR commands. ●● Size - Wallplate. 10 NEW PRODUCT DIRECTORY I 2016 I FORMAT & STANDARDS CONVERTERS I RANGE EXTENDERS & REPEATERS FC-69 HDMI Audio Embedder/De−Embedder 691/692 HDMI, Audio, USB 2.0, Bidirectional RS−232, ETH & IR HDBaseT 2.0 over Fiber Optic Transmitter & Receiver I 692 The FC-69 is a high-performance 4K UHD HDMI audio embedder and de-embedder. The unit can embed analog audio to the HDMI output or de-embed audio from the HDMI input or from the HDMI output Audio Return Channel to S/PDIF and unbalanced stereo audio outputs simultaneously. The 691 and 692 are a high-performance, extended range, HDBaseT 2.0 transmitter and receiver for HDMI, USB 2.0, audio, bidirectional RS-232, ETH and IR signals. The 691 converts the HDMI, USB 2.0, audio, RS-232 and IR input signals into HDBaseT over Fiber optics that the 692 decodes back into HDMI, USB 2.0, audio, RS-232 and IR output signals. FEATURES FEATURES ●● Maximum Data Rate - 8.91Gbps (2.97Gbps per data channel). ●● Maximum Data Rate - 10.2Gbps (3.4Gbps per graphic channel). ●● HDTV Compatible - Support for resolutions up to 4K UHD (4096x2160). ●● 2K & 4K Support. ●● HDCP Compliant. ●● HDTV Compatible. ●● HDMI Support - ARC and HDMI uncompressed audio channels, deep color, CEC. ●● HDCP Compliant. ●● Audio Embedding - Even without an HDMI source. ●● HDBaseT V2 Support. ●● Audio de-Embedding - To unbalanced analog and S/PDIF, selectable from input or ARC. ●● USB Support - USB 1.1 & USB 2.0 (up to 127Mbps). ●● Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer ●● Supports Isochronous USB Cameras. distances. ●● Sleep Mode - 5V on the output, following the input, allows the display to turn off when no video is being sent. ●● Preconfigured Control Options - DIP-switches control locking/modifying EDID, HDCP, embedding/de-embedding and sleep mode functionality. ●● Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter. ●● HDMI Support - Deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, CEC, 2K, 4K, 3D. ●● Laser Standards Compliance - IEC 60825-1, FDA 21CFR1040; Laser Class 1: Safety of laser products. ●● EDID Pass Through - Passes EDID signals from the source to the display. ●● USB Pass-Through - For connecting a peripheral device, such as, a mouse or a keyboard. ●● Bidirectional RS-232 Interface - Data flows in both directions via the RS-232 interface, allowing status requests and device control. NEW PRODUCT DIRECTORY I 2016 11 I RANGE EXTENDERS & REPEATERS (CONTINUED) PT-101UHD 4K UHD HDMI Repeater PT-1Ci HDMI Isolator The PT-101UHD is a high-performance repeater/range extender for 4K UHD HDMI signals. The unit can extend the range up to 10m (33ft) for 4K UHD @60Hz (4.4.4), and up to 20m (66ft) for 4K @30Hz. The PT-1Ci is a security tool for data-sensitive HDMI installations (military, banking, and such). It is an EDID buffer and storage device for HDMI signals that prevents reverse communication of the DDC signal. The device blocks HDCP and prevents EDID passthrough. The PT-1Ci lets you read and capture an EDID securely and present it to sources for compatibility with the display. The device has no effect on the audio and video streams, and therefore, supports 4K UHD video. FEATURES ●● Max. Data Rate - 17.82Gbps (5.94Gbps per data channel). ●● HDCP Compliant. ●● Re-clocking and Equalization. ●● HDMI Output Power Follows Input - There is no power on the output when there is no active input. ●● Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter. FEATURES ●● Max. Data Rate - 10.2Gbps (3.4Gbps per data channel), 4K UHD compatible. ●● HDMI Compatible. ●● HDCP - Not supported. ●● Line Powered Device - Power taken from the HDMI line, no power supply is needed. ●● Indicator - Power LED. ●● Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter. 12 NEW PRODUCT DIRECTORY I 2016 I SPECIALTY AV PRODUCTS & SOLUTIONS TP-590TXR/TP-590RXR 4K UHD HDMI HDBaseT Line Transmitter/Receiver Kramer Network AV over IP Enterprise Management Platform I TP-590RXR The TP-590TXR and TP-590RXR are a high-performance, extended range, HDBaseT 2.0 technology, transmitter and receiver pair for HDMI, high-speed USB 2.0, audio, bidirectional RS-232 and IR signals. The TP-590TXR converts the HDMI, USB 2.0, audio, RS-232, Ethernet and IR input signals into an HDBaseT 2.0 twisted pair signal. The TP-590RXR converts the twisted pair signal back into HDMI, USB 2.0, audio, RS-232, Ethernet and IR signals. Kramer Network is a powerful, all-encompassing Enterprise software platform that lets you easily operate, manage and maintain all your Pro AV, IT, IP streaming, and control in one simple single-point Web-based interface. FEATURES ●● User-friendly Web-based GUI - Easily access and use from anywhere, anytime. FEATURES ●● Maximum Data Rate - 10.2Gbps (3.4Gbps per graphic channel). ●● Max. Resolution - Up to 4K UHD and WUXGA, including 4K @60Hz (4:2:0). ●● HDTV Compatible. HDCP Compliant. ●● HDBaseT V2 Support. ●● USB Support - USB 1.1 & USB 2.0 (up to 127Mbps). ●● Supports Isochronous USB Cameras. ●● 2K and 4K Support in Normal Mode. ●● HDMI Support - Deep Color, x.v.Color™ and 3D. ●● Automated Device Detection - The platform instantly and automatically identifies devices in the network, reducing configuration time. ●● Enhanced Security - With intuitive user access management, Kramer Network allows only certain users to access specific audio or video sources, rooms and pre-defined scenarios. ●● Visual & Topology AV System Mapping - Easily drill down to a specific network, site, building, or room to start managing AV devices. ●● System & Connection Status at a Glance - Quickly identify critical issues in the network, see logical-video-links status at a glance. ●● Remote Maintenance - No need for on-site visits. ●● System Range - Up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K); up to ●● Control over IP - Built-in controller supports virtually unlimited number of controlled devices ●● ●● No Programming Required - Install and start using the platform in minutes with no need for ●● ●● ●● ●● ●● ●● ●● 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC-HDKat6a cables. Cables - For optimum range and performance, use Kramer's BC-HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non-Kramer CAT 6 cable may not reach these ranges. EDID Pass Through - Passes EDID signals from the source to the display. High Speed USB 2.0 Pass-Through - For connecting a peripheral device, such as, a mouse or a keyboard. Bidirectional RS-232 Interface - Data flows in both directions via the RS-232 interface, allowing status requests and device control. Power over Ethernet (PoE) - The transmitter can provide power over the TP cable to a PoEcompatible receiver. Audio Support - Analog audio embedding on the transmitter side and de-embedding on the receiver side. Indicators - LED status indicators for input, output, HDBT link and power. Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter. with rich drivers library of 3rd party devices. Supports a new line of I/O devices. programming. ●● Scales to any Size Installation - Support hundreds of devices simultaneously. NEW PRODUCT DIRECTORY I 2016 13 I SPECIALTY AV PRODUCTS & SOLUTIONS (CONTINUED) KDS-MP2 HD Digital Signage Media Player KDS-MP4 4K UHD Digital Signage Media Player The KDS-MP2 is a high-quality LAN-based digital signage media player. The unit receives content streamed from the LAN, saved in its internal memory or from an external USB memory stick and displays it with image quality of up to 1080p HD via HDMI output. The KDS-MP4 is a high-quality LAN-based digital signage media player. The unit receives content streamed from the LAN, saved in its internal memory or from an external USB memory stick and displays it with image quality of up to 4K UHD via HDMI output. FEATURES FEATURES ●● 1080p Full HD Support - Resolutions up to WUXGA and 1080p. ●● 4K UHD Support. ●● High Quality HDMI Video & Audio. ●● High Quality HDMI Video & Audio. ●● Codec Format Support - MPEG-1, MPEG-2, MPEG L2, MP3, H.264/MPEG-4, and VC-1. ●● Codec Format Support - MPEG-1, MPEG-2, MPEG L2, MP3, H.264/MPEG-4, and VC-1. ●● Memory Options - 8GB internal. ●● Memory Options - 8GB internal. ●● NTP Client - For time synchronization. ●● NTP Client - For time synchronization. ●● Integrated SMIL Control - CMS device management in LAN environments. ●● Integrated SMIL Control - CMS device management in LAN environments. ●● SMIL 3.0 Instruction (Sub-Set) Support. ●● SMIL 3.0 Instruction (Sub-Set) Support. ●● CMS Device Management - In LAN environments using the integrated SMIL control. ●● CMS Device Management - In LAN environments using the integrated SMIL control. ●● Perforated Side Panel - For efficient heat dissipation. ●● Perforated Side Panel - For efficient heat dissipation. ●● VESA Standard Mounting Bracket - For mounting on-wall, inside a cabinet or to the VESA ●● VESA Standard Mounting Bracket - For mounting on-wall, inside a cabinet or to the VESA standard screw holes on the rear panel of a display. ●● Media Manager Software - For easy, powerful and versatile management of digital signage content via a PC. ●● Media-Manager Multi-language Support - Ready-made templates for screen layouts, logos, tickers and widgets. ●● Compact DigiTOOLS® - Built-in mounting bracket. 14 NEW PRODUCT DIRECTORY I 2016 standard screw holes on the rear panel of a display. ●● Media Manager Software - For easy, powerful and versatile management of digital signage content via a PC. ●● Media-Manager Multi-language Support - Ready-made templates for screen layouts, logos, tickers and widgets. ●● Compact DigiTOOLS® - Built-in mounting bracket. KW-14 Expandable Wireless HD Transmitter & Receiver PSE-1 10Gb UHD Power Over Ethernet Injector The KW-14T and KW-14R are a high-definition, wireless, HDMI transmitter/receiver pair for indoor use. Up to four KW-14R receivers can receive from one KW-14T transmitter and up to three KW-14T transmitters can be paired with one KW-14R receiver. The KW-14T and KW-14R pair comes pre-associated. The PSE-1 provides power remotely over Ethernet to any device capable of acting as a PoE acceptor (for example, a wallplate, where it may be difficult to connect an external power supply). This allows a single HDBT LAN cable to provide both data and electrical power to compatible devices. FEATURES FEATURES ●● Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel), Deep Color up to 12-bit. ●● Total Range - Up to 100m (328ft) @4K on shielded BC-DGKat623 or BC-HDKat6a cable (or ●● Secure Link - Uses AES-128 bit encryption. ●● Connection Capacity - Up to four receivers can receive from one transmitter simultaneously; up to three transmitters associated with one receiver at any given time. ●● Transmission Range - Up to 30m (100ft) including through walls and furniture. equivalent). ●● 48V DC Power. ●● Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter. ●● Automatic Frequency Selection - Selects the most suitable frequencies to prevent RF interference. ●● Auto EDID Adjustment - To allow multi-screen support. ●● IR Remote Control - Enables the OSD menu to be displayed on the output display. ●● OSD (On Screen Display) - For simplified setup and configuration. ●● HDCP Compliant - HDCP sources are supported only when all connected displays support HDCP. ●● Zero Latency. ●● Automatic Sleep Mode - After three minutes when no input or link is detected. ●● CEC Support. NEW PRODUCT DIRECTORY I 2016 15 I SPECIALTY AV PRODUCTS & SOLUTIONS (CONTINUED) PSE-2 10Gb UHD Power Over Ethernet Injector PSE-4 10G Quad POE Injector The PSE-2 can provide power remotely over Ethernet to two devices that can act as PoE acceptors (for example, wallplates, where it may be difficult to connect an external power supply). This allows a single HDBT LAN cable to provide both data and electrical power to compatible devices. The PSE-4 is a four-way PoE (Power-over-Ethernet) injector that supports 4K UHD video. The unit provides power remotely over Ethernet to up to four devices capable of acting as PoE acceptors, (for example, the DIP-20, where it might be difficult to connect an external power supply). This allows a single HDBT LAN cable to provide both data and electrical power to compatible devices. FEATURES ●● Total Range - Up to 100m (328ft) @4K on shielded BC-DGKat623 or BC-HDKat6a cable (or equivalent). ●● 48V DC Power. ●● 4K Support. ●● Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter. 16 NEW PRODUCT DIRECTORY I 2016 FEATURES ●● 4K Support. ●● 48V DC Power. ●● Total Range - up to 100m (328ft) @4K on shielded BC-HDKat6a cable (or equivalent). ●● Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter. I SCALERS VP-439 HDMI, PC and CV to HDMI Classroom Switcher / Scaler VP-440 Compact 6−Input Presentation Switcher / Scaler with HDBaseT and HDMI Outputs The VP-439 is a high-performance digital scaler for computer graphics video, composite and HDMI signals, including audio. It up/down scales the selected HDMI, CV or computer graphics video/YPbPr input and outputs it to HDMI on a DVI-I connector. The VP-440 is a high-performance presentation scaler/switcher with four HDMI and two computer graphics (VGA) inputs. The unit scales the video, embeds the audio and outputs the signal to an HDMI output and an HDBaseT output simultaneously. The unit includes analog and embedded audio inputs and outputs. FEATURES ●● Maximum Resolution - Up to 1080p/WUXGA. ●● HDTV Compatible. FEATURES ●● PixPerfect™ Scaling Technology - Kramer’s precision pixel mapping and high-quality scaling ●● HDCP Compliant. ●● Auto Switching - Searches for a valid signal when the input signal is lost. ●● Automatic Input Audio Detection and Selection - Selects embedded audio for HDMI inputs, or ●● ●● ●● ●● ●● ●● ●● ●● analog audio when DVI is detected. Auto-Power Down - If no input signal is detected for 2 to 3 minutes, output is shut down. Analog Audio Inputs - For CV, PC and HDMI. Lip Sync Delay On-Screen Display (OSD) - For easy setup and adjustment, accessible via the front-panel buttons. Flexible Control Options - Front panel buttons, OSD (on-screen display), Web page, Ethernet, RS-232. Built-in ProcAmp - For convenient adjustment of video parameters, such as brightness, contrast, color, sharpness and hue. Non-Volatile Memory - Saves final settings. Compact Desktop - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter. ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● technology. High-quality 3:2 and 2:2 pull down de-interlacing and full up- and down-scaling of all video input signals. HDTV Compatible. HDCP Compliant. Max VGA Resolution - 1920x1200 @60Hz. Output Resolutions - Up to UXGA/1080p output resolutions. Microphone Input - For mixing, switching or talk-over. Companion AFV (Audio-Follow-Video) - Stereo audio for every input, on terminal blocks. Audio - Unbalanced stereo and embedded audio for HDMI/HDBT with individual input level controls. Multiple Aspect Ratio Selections - Full, best fit, overscan, underscan, letter box and panscan. Powerful Audio Features - Via DSP technology including audio equalization, mixing, delay, etc. Built-in ProcAmp - Color, hue, sharpness, noise, contrast and brightness. Color Sampling - Supports 4:4:4 (RGB and YUV) as well as 4:2:2 (YUV) color sampling in native mode. Constant Output Sync - No output disruption while switching between inputs when no video is detected. Dedicated RS-232 Port - For bidirectional data tunneling via HDBaseT. Front Panel Lockout . Non-Volatile Memory - Saves final settings. Flexible Control Options - Front panel buttons, Ethernet with built-in Web pages, OSD (onscreen display), RS-232, remote contact closure switches. Compact Desktop - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter. NEW PRODUCT DIRECTORY I 2016 17 I SCALERS (CONTINUED) VP-558 11x4:2 Presentation Boardroom Router / Scaler System VP-734 7−Input 4K UHD Presentation Switcher/ Scaler The VP-558 is a high-performance 11x4 ProScale presentation scaler/matrix switcher that can output four independent scaled images. Each output includes an HDMI and HDBaseT connector. The product supports analog, digital and embedded audio. VP-558 features six HDMI inputs, four HDBaseT inputs, an analog VGA input, and a 4x1 USB switcher. VP-558 also includes a microphone input, independent stereo audio outputs, a monitor output, an amplified speaker output, and audio DSP features. The VP-734 is a 7-input presentation switcher/scaler with four HDMI, one DisplayPort and two user-definable (universal) analog video inputs. It up- and down-scales to selectable graphics or HDTV output resolutions (up to 4K UHD) and provides fast fade-thru-black switching between sources. VP-734 supports analog and embedded audio inputs and outputs and includes rich audio functionality and a stereo loudspeaker output. FEATURES ●● Kramer’s PixPerfect™ Scaling Technology - Kramer’s precision pixel mapping and high quality scaling ●● Pix-Perfect™ Scaling Technology - Kramer’s precision pixel mapping and high-quality full up- and ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● down-scaling technology. HDTV Compatible. HDCP Compliant. Output Resolutions - Up to 1080p/UXGA. System Range - For the HDBT inputs and outputs - up to 70m (230ft). Cables - For optimum range and performance using HDBaseT™, use Kramer's BC-HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non-Kramer CAT 6 cable may not reach these ranges. 4x1 USB Switcher - Can be set to follow the switching of the video layer or as an independent switcher. OSD (On Screen Display) - For easy setup and adjustment, accessible via the front panel buttons. Audio DSP Features. Input/Output Audio Level Adjustment. Selectable Microphone Talkover or Mix Modes. Analog & Embedded Audio Support - For inputs and outputs. Built-in Power Amplifier - 2x10W power amplifier with speaker outputs on a 4-pin terminal block connector. Multiple Aspect Ratio Selections. Built-in ProcAmp - Color, hue, sharpness, noise, contrast and brightness. Built-in Web Pages - For easy setup and remote control. Firmware Upgrade via the Ethernet Multiple Control Options - Front panel buttons with OSD, RS-232, Ethernet and built-in Web pages. Standard 19" (2U). Rack "ears" included. 18 NEW PRODUCT DIRECTORY I 2016 FEATURES technology. ●● Fast Fade-Thru-Black (FTB™) Switching - For smooth, glitch-free switching. The output signal provides constant sync so the display never glitches. ●● HDTV Compatible. HDCP Compliant. ●● Output Resolutions - With selectable refresh rates: up to 4K UHD. ●● Scaled Video Outputs - HDMI and 15-pin HD computer graphics. ●● Multiple Aspect Ratio Selections. Scales & Zooms. ●● 7 Stereo Analog Audio Inputs - On 3.5mm connectors. ●● Embed/De-embed Audio - On the HDMI and DisplayPort inputs and output. ●● Advanced Noise Reduction Features - Improve video quality by reducing artifacts such as block, chroma and mosquito noise. ●● Powerful Audio Features - With DSP technology including audio equalization, mixing, delay and so on. Audio breakaway and audio-follow-video support, selectable audio delay. ●● Stereo Speaker Output - 10W per channel into 8Ω, on a 4-pin terminal block connector. ●● Built-in Video Proc-Amp - Color, hue, sharpness, contrast, and brightness are set individually for each input. ●● Firmware Upgrade - Ethernet-based, via a user-friendly software upgrade tool. ●● OSD (On-Screen Display) - For user-friendly control and adjustments. ●● Advanced EDID Management. ●● AP for Text Overlay Support. ●● USB Port - For use with flash drive to download custom splash-screens and video logos and for storing/ downloading the machine configurations. ●● Non-Volatile Memory - Saves final settings and setup configurations. ●● Flexible Control Options - Front panel buttons, IR remote control, RS-232, Ethernet with Web browser. ●● Worldwide Power Supply - 100-240V AC. Standard 19" (1U). Rack "ears" included. I CABLES & CONNECTORS VP-796 HQUltra 9−Input 4K UHD HDBaseT and Legacy Presentation Switcher / Scaler with Ultra-Fast Input Switching CLS-AOCH/XL Active Fiber Optic High−Speed HDMI Cable with Detachable Connectors Kramer’s AOCH/XL is a pluggable, plug-and-play HDMI active optical cable (AOC) that has unique removable HDMI-A ends, allowing the cable to be easily pulled through small conduits. This cable supports resolutions of up to 4K UHD over long cable runs (up to 100 meters) without the need for an external power supply or additional extenders. With its easy-to-install design and long reach, the CLS-AOCH/XL delivers convenience and reliability. The VP-796 is a universal 4K UHD presentation scaler-switcher for HDMI, DisplayPort, HDBaseT, VGA, composite, and DVI-U signals. Its HQUltraFast technology switches in typically a quarter of a second. FEATURES ●● HQUltra Scaling - Low-latency, 4K UHD best-in-class, proprietary scaling algorithms. ●● HQUltraFast Switching - Proprietary technology for typical 0.25 second input channel ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● switching. HDCP Compliant. 4K60 UHD Support. Ease of Setup - Front panel jog-wheel and LCD display for fast easy set-up in the field. Superior De-Interlacing - Reduces image flicker and artifacts. Color Calibration - For all source types including RGB controls, saturation & hue. Pan-Tilt-Zoom Control. Built-in Test Patterns - For easy projector setup. Supports Customized Video Logo. Flexible Aspect Ratio Conversion. Audio Handling - Audio de-embed from HDMI, DisplayPort, and HDBaseT inputs to S/PDIF; re-embed to HDMI, and HDBaseT outputs. Multiple Outputs - For local monitoring of live output feed. Flexible Control Options - Front panel buttons and jog wheel with LCD, RS-232, Ethernet with built-in Web pages and via API. USB Connectors - For firmware upgrading. Standard 19" (1U). FEATURES ●● Video Resolution - 1080p full HD, Deep Color 48-bit, 3D, 4K @30Hz (4:4:4), 4K @60Hz (4:2:0). ●● Embedded Audio - PCM 8-channel, Dolby Digital True HD, DTS-HD Master Audio. ●● HDMI Compliance - HDCP, EDID, CEC. ●● Construction - 4 optical fibers and 6 copper wires. ●● No External Power - Powers the active units via the HDMI connector, consumes only 0.25W (50mA @5V). ●● Very Thin Construction - 3.4mm (0.13") diameter. ●● Small Bending Ratio - Only 6mm (0.24"). ●● Jacket Construction - Low smoke for Europe. ●● Pull Strength - 500N (50kg). ●● Varied Selection of Lengths - Available in versions from 10 to 50m (32.8 to 164ft). NEW PRODUCT DIRECTORY I 2016 19 I CABLES & CONNECTORS (CONTINUED) CP-AOCH/XL Plenum Rated Active Fiber Optic High-Speed HDMI Cable with Detachable Connectors Kramer’s AOCH/XL is a pluggable, Plug and Play HDMI active optical cable (AOC) that has unique removable HDMI-A ends allowing the cable to be very easily pulled through small-size conduits. It offers the easiest install solution for HDMI, supporting resolutions up to 4K UHD over long cable runs (up to 100 meters) without the need for an external power supply or additional extenders. With its thin, flexible cable and small connector, the AOCH/XL delivers ultimate reliability and convenience. C-UA/LTN Lightning to USB Sync & Charge Cable Kramer’s C-UA/LTN cable is a MFi certified USB 2.0 cable to connect and charge your iPhone®, iPad® or iPod® with Lightning™ connector. The cable can be used to connect to your computer's USB port for syncing and charging or to a USB power adapter for reliable charging from a wall outlet. The Lightning connector fits in either direction to enable easier connection of your Apple devices. FEATURES FEATURES ●● Video Resolution - 1080p full HD, Deep Color 48-bit, 3D, 4K @30Hz (4:4:4), 4K @60Hz (4:2:0). ●● Embedded Audio - PCM 8-channel, Dolby Digital True HD, DTS-HD Master Audio. ●● HDMI Compliance - HDCP, EDID, CEC. ●● Construction - 4 optical fibers and 6 copper wires. ●● No External Power - Powers the active units via the HDMI connector, consumes only 0.25W (50mA @5V). ●● Very Thin Construction - 3.4mm (0.13") diameter. ●● Small Bending Ratio - Only 6mm (0.24"). ●● Jacket Construction - Plenum rated CMP-OF (UL). ●● Pull Strength - 500N (50kg). ●● Varied Selection of Lengths - Available in versions from 10 to 50m (32.8 to 164ft). 20 NEW PRODUCT DIRECTORY I 2016 ●● Quality Performance - For reliable syncing and charging, Kramer’s C-UA/LTN cable is built using high-quality materials with durable construction for maximum flexibility. ●● Compatible Devices - iPhone 6, 6 Plus, 5, 5C and 5S; the iPod Nano, the iPod Touch, the iPad Mini, the iPad Air and the 4th generation iPad. ●● Available Colors - White, black, blue, green, yellow & pink. ●● MFi Certified. C-MDP/DPM Mini DisplayPort to DisplayPort Cable Kramer's C-MPM/DPM cable is an ideal solution for connecting the Mini DisplayPort or Thunderbolt output of a small laptop or tablet to a computer monitor that accepts a DisplayPort input. This cable carries a digital audio/video signal, supports up to 4K UHD resolution and is built to DisplayPort 1.2 standards. C-SC/SC/OM4 OM4 Multi−Mode Fiber Optic Cable Kramer's SC/SC/OM4 series is a laseroptimized OM4 fiber optic multi-mode 50/125um cable in a 3.0mm (0.118in) diameter PVC jacket terminated with SC connectors. FEATURES ●● Quality Construction - Developed for 40Gbps standards. 850nm OM4 multi-mode fiber in a flexible PVC outer jacket of 3.0mm (0.118in) diameter. FEATURES ●● Video Resolution - Supports up to a 4K @60Hz 4:4:4 resolution with a maximum HBR2 bandwidth of 21.6Gbps. ●● Standards Compliance - DisplayPort 1.2. ●● Gold Plated Connectors. ●● Varied Selection of Lengths - 0.9 and 1.8m (3 and 6ft). C-A63M/XLM 6.3mm Male to 3−pin XLR Male Cable ●● Numerous Applications - Connects Kramer's 670T/R, 671T/R, and 673T/R transmitter/ receivers for long-distance transmission of high-resolution digital video signals over fiber. ●● Varied Selection of Lengths - Available in versions of 10, 20, 30, 50, 75 100, 170, 200 and 250m (33 to 820ft). BCLS-11 CAT 5E U/UTP LSZH Bulk Cable Kramer’s C-A63M/XLM is a shielded twisted pair pro audio cables with a 6.3mm (1/4” TRS) male plug at one end and a XLR male connector at the other end. These cables are engineered to provide all the clarity and power you need and built for years of rugged use. FEATURES ●● Quality Construction - 26AWG tinned copper covered by a spiral tinned copper shield to protect signal quality with superior coverage. ●● PVC Jacket - Heavy-duty PVC jacket covered with cotton braid for a nice feel, terminated with high-quality assembly type connectors. ●● Varied Selections of Lengths - 3.0 to 7.6m (10, 15 & 25ft). FEATURES Kramer's BCLS-11 is a high-performance CAT 5E U/UTP cable designed for IT, LAN and Ethernet installations. BCLS-11 is constructed with four pairs of 24AWG solid bare copper conductors in an LSZH jacket with internal rip cord and sequential markings every meter. It is packed in a Reelex II carton for easy to pullout. BCLS-11 exceeds CAT 5E specifications to provide additional performance and bandwidth beyond the basic standard. ●● High-Performance Transmission. ●● High-Quality Safety Properties. ●● Sweep Frequency up to 350 MHz. ●● Reelex II Carton for Easy Deployment. NEW PRODUCT DIRECTORY I 2016 21 I CABLES & CONNECTORS (CONTINUED) BCLS-21 CAT 6 U/UTP LSZH Bulk Cable FEATURES BCLS-31 CAT 6A U/UTP LSZH Bulk Cable Kramer’s BCLS-21 is a high-performance CAT 6 U/UTP cable designed for IT, LAN and Ethernet installations. It is constructed with four pairs of 23AWG solid bare copper conductors with a cross filler. It is enclosed in an LSZH jacket with internal rip cord and sequential markings every meter and packed in a Reelex II carton for easy to pull-out. BCLS-21 cable exceeds CAT 6 specifications to provide additional performance and bandwidth beyond the basic standard. ●● High-Performance Transmission. ●● High-Quality Safety Properties. ●● Sweep Frequency up to 600MHz. ●● Reelex II Carton for Easy Deployment. BCLS-23 CAT 6 F/UTP LSZH Bulk Cable FEATURES FEATURES ●● High-Performance Single Cable Transmission. ●● Zigzag Jacket Design - Provides excellent performance of six around one bundle transmission. ●● Round & Smooth Jacket without Twisted Stripe. ●● High-Quality Safety Properties. ●● Sweep Frequency up to 650MHz. BCLS-33 CAT 6A F/UTP LSZH Bulk Cable Kramer’s BCLS-23 is a high-performance CAT 6 F/UTP cable designed for IT, LAN and Ethernet installations. The cable is constructed with 23AWG solid bare copper conductors with a cross filler and overall metal foil screen with a drain wire. It is enclosed in an LSZH jacket with sequential markings every meter and packed on a fumigated plywood reel. BCLS-23 cable exceeds CAT 6 specifications to provide additional performance and bandwidth beyond the basic standard. FEATURES ●● High-Performance Transmission. ●● High-Performance Transmission. ●● High-Quality Safety Properties. ●● High-Quality Safety Properties. ●● Sweep Frequency up to 400MHz. ●● Sweep Frequency up to 650MHz. 22 NEW PRODUCT DIRECTORY I 2016 Kramer’s BCLS-31 is a high-performance CAT6A U/UTP cable designed for IT, LAN and Ethernet installations. It is constructed with four pairs of 23AWG solid bare copper conductors with a cross filler in an LSZH jacket with internal rip cord and sequential markings every meter and packed on a fumigated plywood reel. The unique zigzag jacket design provides excellent performance of “six around one” bundle transmission. BCLS-31 cable exceeds CAT 6A specifications to provide additional performance and bandwidth beyond the basic standard. Kramer’s BCLS-33 is a high-performance CAT 6A F/UTP cable designed for IT, LAN and Ethernet installations. It is constructed with 23AWG solid bare copper conductors with a cross filler and overall metal foil screen with a drain wire. It is enclosed in an LSZH jacket with sequential markings every meter and packed on a fumigated plywood reel. BCLS-33 cable exceeds CAT 6A specifications to provide additional performance and bandwidth beyond the basic standard. I ROOM CONNECTIVITY BCLS-45 CAT 7 S/FTP LSZH Bulk Cable FEATURES ●● High-Performance Transmission. ●● High-Quality Safety Properties. UTBUS-2XL Under−the−Table Modular Connection Bus Kramer’s BCLS-45 is a high-performance CAT 7 S/FTP cable designed for IT, LAN and Ethernet installations. It is constructed with 23AWG solid bare copper conductors where each pair is individually shielded with metal foil screen and the entire cable is shielded with a tinned copper braid. It is enclosed in an LSZH jacket with sequential markings every meter and packed on a fumigated plywood reel. BCLS-45 cable exceeds CAT 7 specifications to provide additional performance and bandwidth beyond the basic standard. The UTBUS-2XL is a furniture-mounted modular connection bus that is easily installed underneath a wooden table or podium top. It has six slots for wall plate inserts and dual power socket openings. NOTE: The UTBUS enclosure, power socket, power cord & inserts are purchased separately. ●● Sweep Frequency up to 750MHz. FEATURES ●● Power Sockets - 10 different "TS" dual power socket options are available to accommodate the power requirements worldwide. (Purchased separately). ●● Power Cord - 8 different "C-AC" single power cords for each power socket. (Purchased separately). ●● Insert Slots - 6. ●● Installation Requirement - Requires 25.0cm x 13.7cm (9.84" x 5.4") of free space beneath the table. ●● Weight - 0.7kg (1.54lbs) approx. NEW PRODUCT DIRECTORY I 2016 23 I ROOM CONNECTIVITY (CONTINUED) I MOUNTING & RACK ADAPTERS WU-2AA 2 x USB 2.0 (A/A) Wall Plate Insert RK-COLLAGE Rack Adapter for VIA Collage The WU-2AA is a single wall plate insert with two USB 2.0 Type A ports and two cables with USB Type A connectors at the rear. FEATURES ●● Front Connectors - 2 USB-A (F). ●● Rear Connectors - 2 USB-A cable (F). ●● Wall Plate Insert - Single slot. WU3-AA USB 3.0 (A/A) Wall Plate Insert The WU3-AA is a single wall plate insert with one USB 3.0 Type A port and a cable with a USB 3.0 Type A connector at the rear. FEATURES ●● Front Panel Connection - USB-A (F). ●● Rear Panel Connection - USB-A cable (F). ●● Wall Plate Insert - Single slot. 24 NEW PRODUCT DIRECTORY I 2016 19” rack adapter for mounting a VIA Collage into a 1U rack space. FEATURES ●● Capacity - Holds one VIA Collage unit with its power supply. ●● Standard 19” (2U). Rack “ears” included. I AUDIO Galil 2-C 2.5−Inch Closed−back Ceiling Speakers Tavor 6-O 6.5−Inch, On−Wall 2−Way Powered Speakers The Galil 2-C is a 2.5” full-range closed-back speaker with ceramic terminals and a plastic self-extinguishing back-can. It is especially designed to meet the requirements of fire alarm systems in public spaces and is EN 54-24 certified. The Tavor 6-O is a pair of 6.5-inch powered two-way speakers designed for indoor wall mounting. The active speaker accepts a line-level stereo input and amplifies it using a built-in amplifier and outputs a speaker signal to the passive speaker. FEATURES FEATURES ●● Type - Closed-back ceiling speaker. ●● Active Loudspeaker - Stereo 2x50W RMS, 2x140W continuous program built-in power ●● Woofer - 2.5” paper cone. ●● Impedance - 8Ω (transformer tap in off position). ●● Power Handling - 10W RMS, 30W continuous program. ●● Transformer Taps - 70V - 3W/1.5W/0.75W/8Ω/10W/Off (Lo-Z); 100V - 6W/3W/1.5W/8Ω/10W, Off (Lo-Z). ●● Package - 18 units in a carton. amplifier. ●● Inputs - 1 unbalanced RCA, 1 unbalanced 3.5mm mini jack, 1 balanced on terminal block. ●● Audio Level Controls - Volume, treble and bass. ●● Magnetically Shielded. ●● Enhanced Bass Reflex. ●● Auto Power - Shuts off when system is not in use, indicated by a LED. ●● Automatic Input Voltage Selector - 90 to 240V AC, 50 to 60Hz. ●● Indoor Wall Mounting. ●● Available in Black or White. ●● Mounting Configuration - Active speaker: left, passive speaker: right. ●● Weight (Single Speaker) - Active speaker 3.6kg (7.92lbs) approx., passive speaker 2.7kg (5.94lbs) approx. ●● Package - 2 speakers (1 pair); 1 pair of U-shaped rotating mounting brackets with 4 mounting knobs; 4m (13.12ft) power cord; 4m (13.12ft) loudspeaker cable; 2m (6.6ft) 3.5mm to 2 RCA cable. NEW PRODUCT DIRECTORY I 2016 25 I AUDIO (CONTINUED) FC-404NET 4X4 Dante Interface KADS-2 Controllable Powered Speaker The Kramer FC-404NET is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network. The KADS-2 is an active speaker with multi-channel, digital audio, control and power provided over a single cable. Used in conjunction with the KADS-100 controller, up to ninety-nine KADS-2 speakers can be connected in tree and branch configurations. The KADS-2 has two outputs that can be connected to either a KADS-1 or a KADS-2 up to 30m away with a total of sixteen speakers, eight per chain. The KADS-2 also has a power input for extending a chain beyond 30m for a further eight speakers in the chain. FEATURES ●● Dante Network Interface. ●● Inputs - Four balanced, line-level/mic inputs. ●● Outputs - Four balanced, line-level outputs from the network. ●● Volume Settings - Independent input gain/output volume settings per channel. ●● Selectable Input Settings - DIP-switch controlled input settings - line level (0db) or mic level (+20dB) with phantom +48 volts. ●● Versatile Control - Via the Dante IP control matrix or Kramer Protocol 3000 via RS-232 connection. ●● Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter. FEATURES ●● High-Resolution Audio Support. ●● Highly Flexible Layout Options - Up to 99 speakers (8 per branch). Additional branches/ speakers require an optional power supply for each 8 speakers. ●● Control - Via the KADS-100 controller. ●● Speaker ID - Set unique ID on each speaker for control from KAD-100 Controller. ●● USB - For firmware upgrades. ●● Built-in 25 Watt Power Amplifier. - Power via KADS-100 controller for 8 speakers. ●● Range - 30m (100') between speakers with a 240m (800') total system range without additional power supplies. 26 NEW PRODUCT DIRECTORY I 2016 KRAMER ELECTRONICS, Ltd. 3 Am VeOlamo St., Jerusalem, Israel 9546303 Tel: + 972 732650200, Fax: + 972 2 653 5369 E-mail: [email protected] WWW.KramerAV.com 2902-000918 DISTRIBUTED BY www.KramerAV.com © 2016 Kramer Electronics, Ltd. All rights reserved. Reproduction in whole or in part without written permission is prohibited. 2902-000919