Preview only show first 10 pages with watermark. For full document please download

Ksj600 Series Single Phase Dc Output Solid State

   EMBED

Share

Transcript

Solid State Relay KSJ600 Series Single Phase DC Output ● IGBT output ● Rating 7A, 12A, 20A @600VDC ● 4-32VDC control input ● Dielectric strength≥2500Vrms ● Opto-isolation ● LED indication ● RoHS compliant Product Description KSJ600 series is single-phase DC output printed board mounted solid state relay.Control voltage is 432VDC, load voltage is 10-600VDC,output current is 7A,12A and 20A. Photoelectric isolation between input and output, dielectric strength≥2500VACrms. Product Selection KSJ Series Load Voltage 600:600VDC Load Current 7:7Amp 12:12Amp 20:20Amp L: LED 7A 12A 20A KSJ600D7 KSJ600D12 KSJ600D20 KSJ600D7-L KSJ600D12-L KSJ600D20-L Description D:4-32 VDC DC Control Technical Specification Input Circuit Control Voltage Range 4-32VDC Minimum Turn-On Voltage 4VDC Minimum Turn-Off Voltage 1VDC Maximum Input Current 28 mA @32VDC Output Circuit Load Voltage Range Load Current Range Maximum Surge Current(@10ms) Maximum Turn-On Time 10-600VDC 7A 0.001 - 7A 12A 0.001 - 12A 20A 0.001 - 20A 7A 30A 12A 40A 20A 50A 100μs Kudom Electronics Technology www.kudom-elec.com Maximum Turn-Off Time 500μs Maximum Off-State Leakage Current [@ Rated Voltage] 0.1mA Maximum On-State Voltage Drop [@ Rated Current] 1.9VDC General Information Dielectric Strength, Input/Output/Base (50/60Hz) ≥2500Vrms Ambient Operating Temperature Range -30℃ ～ +80℃ Ambient Storage Temperature Range Weight (typical) -30℃ ～ +100℃ 80g Application Suitable for DC heating，DC power，DC valve，DC motor，solar energy and so on. Installation Thermal Curve 7A 15 6 Load Current(A) Load Current(A) 8 4 2 0 12A 12 9 6 3 0 10 20 30 40 50 60 70 80 Ambient Temperature（℃） 0 10 20 30 40 50 60 70 80 Ambient Temperature（℃） Kudom Electronics Technology www.kudom-elec.com Load Current(A) 25 20 A 20 15 5 0 0 10 20 30 40 50 60 70 80 Ambient Temperature（℃） Important Notice 1. Suppression circuit will be added when used for inductive load. 2. Control polarity shall be correct, or may damage the product. 3. Load current performance will decline when the ambient temperature is over 40℃. Product Certification @Kudom Electronics Technology, All Right Are Reserved Kudom Electronics Technology www.kudom-elec.com