Transcript
Low Voltage Wiring Tester
KT 210
KT 210 – Entry model with high performance
Perfect for stand-alone operation and for test consoles
Easy handling in stand-alone operation Automatic learning of golden samples
The KT 210 is characterized by an outstanding price
Loading and storing of test programs
performance ratio and is especially optimized for the
Comprehensive result reporting
operation in connection with test consoles:
Operation language selectable
Support of adapter LEDs Push-back test
Up to 512 test points in the basic unit, expandable
Assembly help during the manufacture of wiring
with test point units up to 2048 test points
harnesses
Low voltage tests up to 12 VDC / 10 mA
Space saving design
Continuity test, short circuit test and component
Interfaces for cutter, marker etc.
test Ensuring of your product quality by system Microsoft® network interface
availability
USB 2.0 interfaces Windows CE 6.0® on ARM® processor
The high reliability of the adaptronic test and adapter
2 GB storage for test programs and result data
systems, our quick response service and more than 30
(expandable)
years of experience make a convincing contribution to
Remote maintenance via network
the quality assurance of your products.
Competence in Testing
Low Voltage Wiring Tester
KT 210
Technical features Test points
64, 128, 256 or 512, expandable with up to 3 test point units, max. 512 test points each
Low voltage (DC) Test voltage
max. 12 V
Test current
max. 10 mA
Continuity test threshold
1 Ohm – 1 kOhm
Short circuit test threshold
20 kOhm – 1 MOhm
Component test
Resistors: 1 Ohm – 1 MOhm Capacitors: 10 nF – 10 mF Diodes, Zener diodes, LEDs
General Power supply
External AC adapter, primary 90 – 240 VAC, secondary 24 VDC / can also be operated directly at 24 VDC
Interfaces
3 x digital I/Os (Extern Interface, expandable) for control, foot switch and signal lamp 2 x serial interface RS232 for control an printer 2 x USB 2.0 (1 x at the front-side) for data media, barcode scanner, keyboard and printer Network Ethernet 10/100BaseT / pin probe Optional control via all standard field bus systems
Dimensions (W x H x D)
235 mm x 140 mm x 275 mm
Scope of delivery
KT 210, AC adapter with main cable, pin probe, USB-stick with PDF documentation, start-up manual
Test program generation with NT Control LT: Generation, editing and management can be done comfortable with the easy to use software tool NT Control LT. The data transfer between a PC with NT Control LT and the KT 210 takes place via network or USB-stick. NT Control LT is available as accessory.
© Copyright 2015, adaptronic Prüftechnik GmbH. All rights reserved. All mentioned features and functions are subjects to change. This document is only for information. Images contain options. adaptronic is a word-brand of adaptronic Prüftechnik GmbH. Mentioned brands and trademarks are property of the respective brand owners.
PI-04-012-D
adaptronic Prüftechnik GmbH Dörlesberg-Ernsthof D-97877 Wertheim
+49 9345 930-0
[email protected] www.adaptronic.de
