Transcript
LIGHT POINTS AND POLES
KUMA RD HID
Printed: 2013-07-05
Decorative light point with minimalist design in cylindrical shapes
SIMON LIGHTING, S.A.
53
LIGHT POINTS AND POLES
SIMON KUMA RD HID
Simon KUMA RD HID configurator MODEL
SPF Fixing plate and Spanish standard trapdoor SP, flat cover DIFFUSER
CABLING
REFLECTOR
FOR LAMP*
CLASS
GEAR
DIMMING
ATC
0m
SRD
HPS
35 W
E27
CI
EM
2N-
Met. High Res. Transp. Cylindrical
No cable
Small Road optics
High-Pressure Sodium
G12
HPS MH
Class I
European electromagnetic 230 VAC, 50 Hz
No control line Self-dimming
MH
50 W
G12
CII
EL
2N+
E27
HPS MH
Class II
European Electronic 230 VAC, 50/60 Hz
With control line
ATH Met. High Res. Transp. Cylindrical with 180° glare shield
Metal Halide
70 W
EG
1N
E27
Electromagnetic 230 VAC, 60 Hz
No dimming
100 W
CAD
G12
CAD
150 W
1-10 V
G12
1-10 Protocol
DALI DALI Protocol
FINISHES
SS Shaft Decorative rings
Stainless Steel DGCLAS
GV painted Simon Lighting colour chart Extruded Aluminium Shaft See page 376 GY9006 Decorative rings GY9006
AS Shaft Decorative rings
GV painted RAL classic colour chart Shaft See RAL chart Decorative rings GY9006
* Use lamps without built-in starter. * Check compatibility of lamp size with reflector selected. CONFIGURATION LIMITATIONS
CAD, 1-10 V and DALI dimming using only electronic (EL) gear. Electronic gear available only up to 150 W. Luminaires with EM and 1N gear are common to HPS and MH lamps. 35 W powers only available with 1N electromagnetic (EM) gear.
BASE REFERENCES
Complete Simon KUMA RD HID light point, mounting plate and Spanish standard trapdoor, flat cover, transparent cylindrical methyl methacrylate diffuser with Class I electromagnetic gear. No pre-wiring, 230 VAC/50 Hz power supply, Class I luminaire and road optics.
SS Stainless Steel
AS Extruded Aluminium
GV DGCLAS painted galvanised steel
POWER
SOCKET
CLASS
GEAR
DIMMING
CODE
CODE
CODE
35 W 50 W 70 W 100 W 150 W
G12 E27 E27 G12 G12
CI CI CI CI CI
EM EM EM EM EM
1N 1N 1N 1N 1N
50-88031 50-88032 50-88116 50-88034 50-88178
50-88025 50-88022 50-88119 50-88024 50-88180
50-88026 50-90120 50-88118 50-88028 50-88179
ACCESSORIES ITEM
DESCRIPTION
CODE
Decorative ring for Stainless Steel post base
50-88802
Decorative ring for Extruded Aluminium post base
50-88803
Decorative ring for DGCLAS painted galvanised post base
50-88801
Spare transparent ARI T methyl methacrylate diffuser
50-88058
DIFFUSERS
Printed: 2013-07-05
DIFFUSER
54
DESCRIPTION
DIFFUSER
Completely transparent diffuser which allows light flux propagation over 360° ATC
DESCRIPTION
Glare shield diffuser which allows light flux propagation over 180° ATH
SIMON LIGHTING, S.A.
LIGHT POINTS AND POLES
SIMON KUMA RD HID
SIMON KUMA RD HID TECHNICAL INFORMATION PHOTOMETRIC DATA*
PHYSICAL DIMENSIONS
Optical Group Reflectors Lamps
SRD Small Road optics HPS – High Pressure Sodium MH – Metal Halide Use MH lamps according to current (A) table, page 375. 35, 50, 70, 100, 150 W E27, G12
Power Socket Inst. ULOR
E2
* Use HPS lamps without built-in starter. Check compatibility of lamp size with reflector selected.
Ground mounting Wall-mounting IP rating
Plate with gussets, bolts: M22x600 mm. Using accessory secured to the wall. IP44 Electrical group IP54 Optical group (IP66 Optical module) IK10
IK code Windage area
4 m: 0.88 m²
Weight
GV
73 kg, AS
38 kg, SS
54 kg
MATERIALS Shaft
Painted galvanised steel, AISI 316 stainless steel or extruded aluminium. Transparent high impact strength methyl methacrylate
Diffuser
PHOTOMETRIC DISTRIBUTION KUMA RD 70 W G12 360°
KUMA RD 70 W E27 180°
Closure Reflector Recyclability
Trapdoor, with triangular key Anodised aluminium
DIMENSIONS
4.000
Ø219
M22
L = 600 mm
FINISHES Stainless Steel
ELECTRICAL PARAMETERS* Working temperature Dimming
Printed: 2013-07-05
only electronic only electronic only electronic Gear
Supply voltage Frequency Surge protection Cos Luminaire electrical protection * Depending on the model ** On request
SIMON LIGHTING, S.A.
-40 °C to +40 °C 2N- No control line 2N+ With control line 1N (100%) No dimming CAD Cabinet amplitude dimming 1 - 10 V** DALI** State-of-the-art compact gear; starter, capacitor and wiring in a single block. Electronic gear Electromagnetic Electromagnetic EL gear gear EG EM 220-240 Vac 220-240 Vac 220-240 Vac 50 Hz 60 Hz 50 / 60 Hz 4 kV ≥ 0.95 Class I or Class II
Shaft Decorative Rings Extruded Aluminium
SS DGCLAS
Shaft Decorative Rings Painted galvanised steel Shaft Decorative Rings Painted galvanised steel Shaft Decorative Rings
SS GY9007 Simon Lighting colours GY9006 Other RAL colours GY9006
CERTIFICATES Luminaire conforms to: EN-60598-1 and 2-3 / EN-ISO-55015 / EN61547 / EN 61000-3-2 and 3-3 / EN-40
ES-0042 / 1995
Warranty 2 years. Items supplied and packaging Shaft and optical group supplied in separate packages. SPF models supplied with fixing bolts and template. Supplied without lamps. Maintenance Keep the diffuser surface clean to obtain maximum luminous flux. Use a damp cloth. Do not use aggressive products or detergents. Lubricate water-tight seals and replace when cracked. Lubricate locks and/or hinges of moving parts.
55