Preview only show first 10 pages with watermark. For full document please download

Kv-2 Low Temperature Viscometer Bath - Stanhope-seta

   EMBED


Share

Transcript

PM-93 Pensky-Martens Flash Point Tester Service Schedule & Consumables 35000-0 Service & Maintenance Schedule Install Verify the expected flash point using a Multi-Test Verification Material* (Recommended) 3 Months 6 Months • Verify the expected flash point using a Certified Reference Material* (Mandatory) Calibrate the pressure • • • Calibrate the temperature NOTE: In the event of a verification failure, the pressure should be calibrated and the instrument re-verified. If the instrument fails verification after pressure calibration, calibrate the temperature. The Ignitor Temperature should only be calibrated if instructed by Stanhope-Seta MULTI-TEST VERIFICATION MATERIALS (MTVM)* 99851-0 MTVM Gas Oil 500ml • Temperature Range: 56 to 80°C 99852-0 MTVM Fuel Oil 500ml • Temperature Range: 92 to 122°C 99853-2 MTVM Lubricating Oil 500ml • Temperature Range: 196 to 210°C Certified Reference Material (CRM)* SP9000-0 Multi Test CRM - Diesel Oil 500ml • 12 Months Temperature Range: 50 to 60°C t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk • Spares & Consumables CONSUMABLES 35000-001 Flash Detector 35000-002 PRT Probe 35000-003 Refill Canister for SafeFlash Fire Extinguisher (10) 35000-004 Ignitor Assembly 35000-005 Cup 35000-006 Gas Ignitor 35000-007 Stirrer 35000-008 Lid & Shutter Assembly 35000-009 Miniature Screw Set 81002-301 Printer Paper (pack of 20) Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk CONSUMABLES 35000-010 Shorting Plug, Fire Extinguisher 35000-011 Fuse Mains (pack of 10) 35000-012 PRT Calibration Loom 35002-001 Fuse, Fire Extinguisher (pack of 10) ACCESSORIES 35002-0 SafeFlash Extinguisher System (Factory fitted) 35003-0 PM-93 Barcode Scanner 81002-3 Data Printer 23680-0 Spirit Level UPGRADE KITS 35010-0 PM-93 Software Upgrade Kit Contact Information TECHNICAL SUPPORT E: Bertram Thompson [email protected] T: 01932 564391 W: www.stanhope-seta.co.uk/support Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk