Transcript
KVM-1000
DVI Single Link, and USB over 2 Multimode Fibers Features • Fully uncompressed to 1920 x 1200 • Supports DVI-D to WUXGA • Supports HDMI • Supports HDCP • Self-Detecting EDID • 2 fibers (50 or 62.5 Multimode) • 2-Port USB 2 hub @ TX • 4-Port USB 2 hub @ RX • Up to 480Mb/sec • RX Supports high powered devices up to 500mA • ST, SC or LC • Supports all OS’s • Plug and Play • Throw-down or rack
The Cost-Efficient Way to Remote Your Desktop Up to 1Km on Just Two Multimode Fibers The KVM-1000 is designed to transport DVI computer graphics while extending computer control via USB. With integrated USB hubs on both sides of the link, the KVM-1000 goes far beyond a standard remote destop allowing the easy addition of other peripherals such as printers, scanners or even web cams. All on two multimode fibers. DVI RGB
Applications • Commodity and stock exchanges • Medical and MRI displays • Advertising and signs • Sporting and concert video displays • Digital cinema • Radar displays • Air traffic Control • Military info displays
USB
The video transport section supports a high– quality DVI-D interface and will significantly increase the transmission distance limitations of high resolution DVI video and computer graphics over multimode fiber. The KVM-1000 will automatically collect EDID information from the display and adjust acordingly to give you plug and play convenience. The KVM-1000 system will transport virtually any VESA-compliant DVI signal from 640x480 VGA up to and including 1920x1200 WUXGA. Standard 24-pin DVI connectors are provided at each side of the link. HDMI is supported via an included adapter cable.
The integrated USB Hubs provide plenty of flexibility on your remote desktop
Each end also incorporates an integrated USB 2.0 hub for all of your peripherals for easy connection convenience and less desktop clutter. Do you use high-powered devices on your USB Bus? The RX unit supplies up to 500mA per output and solves that problem, too. All USB connectors are standard “A” type. As with all Multidyne products, rack kits are available for rack mounting up to three units in a single RU. And for your optical connections, choose between ST, FC, SC or LC for easy integration into your fiber backbone. There are many KVM over fiber products on the market today at many different price points. The KVM-1000 answers the call for a low-priced yet full featured KVM solution for multimode fiber. If you have installed singlemode fiber or need to cover longer distance requirements, please look at our KVM-6000 series of KVM extenders. And don’t forget the industry leading 7-year warranty. The KVM-1000. DVI and USB at a price that will surprise you. Designed and manufactured in New York.
USB
USB
Monitor Video
Monitor Video
Application
2 MM fibers
Specifications Video
DVI connector 1 IN on TX, 1 OUT on RX Scan rates As per VESA standards Standards DVI-D up to WUXGA HDMI via adapter Resolutions Up to 1920x1200 single-link
USB
Electro-Optical
Operating Wavelengths 850 and 1271-1591nm TX Laser output power -8 dBm, Class 1 Receiver Sensitivity up to -18 dBm Fiber Compatibility 2 Multimode Fibers Optical Connector ST, LC, SC Distance limit 1 km
Standard up to USB 2.0 Connectors 2 Type A on TX via hub 3 Type A on RX via hub
Mechanical, Environmental
Dimensions (LxWxH) 6.75” x 5.5” x 1.75” Weight 2 lbs. Temperature Range -0° to +70°C Humidity Range 0 to 95% RH Noncondensing Power Input 2.5mm jack Center pin + Power rating, nominal 50w max@14 VDC Power Requirement 15w @9-24VDC
Ordering Information MULTIMODE
Connector type = ST, SC or LC
KVM-1000-FTX-22-ST
DVI Single Link TX, WUXGA, 1920 x 1200, w/ USB 2.0 hub for keyboard, mouse & other USB peripheral, 2 Fibers, Multimode
KVM-1000-FRX-22-ST
DVI Single Link RX, WUXGA, 1920 x 1200, w/ USB 2.0 hub for keyboard, mouse & other USB peripheral, 2 Fibers, Multimode
ACCESSORIES KVM-6000-PS
Replacement Power Supply for KVM-6000 and 1000 units
PS3-12VDC
Three Output DC Power Supply for up to three KVM-1000 modules
RMT
Triplee Rack-mount Kit (1 kit)
BP-T
Blank panel for RMT rack-mounting kit
191 Forest Avenue Locust Valley, NY 11560 Phone 516-671-7278 Fax 516-671-3362
Transmit • Route • Receive www.multidyne.com © 6/2012 MultiDyne Specifications subject to change without notice
Made in USA
