Kvm Tower Switch With 2 Port Description

Transcript

KVM Tower Switch With 2 port Description The product is a KVM switch that allows access to two or four IBM compatible computers from one PS/2 Keyboard, one PS/2 Mouse and one VGA, SVGA or Multisync monitor. Switching between connecting computers is as easy as pressing the push button (which is conveniently placed on the top of the switch) or entering hotkey commands from your keyboard. There is no interface card or software to install and the Tower KVM is completely independent from any operating system. Specification 2 unique loose-free cables included Supports both PS/2 keyboard and mouse Keyboard and mouse emulation for error-free PC boot up. Keyboard and mouse are hot pluggable at any time without turning either the Tower Switch or PC’s off Unique Space Saving design Auto-scan automatically selects computers sequentially Supports Microsoft IntelliMouse (Pro), Explorer, Optical Hotkey and push button allow easy computer access Keyboard states automatically saved and restored when switching computers Operating system independent, transparent to all applications High VGA resolution 1920 × 1440 Power-free operation the - Tower KVM draws power from Part Number Table Description Part Number Switch, KVM, Tower, W / Cables, 2 Port KVM-402 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. pro - SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 05/02/16 V1.0