Transcript
Weekly
Adding Oil
A. Check Oil Level. Turn OFF for at least 5 minutes before checking. If necessary, add oil until level reaches FULL line. DO NOT OVERFILL! (see Adding Oil)
Oil Level Site Glass OI L
B. Check Moisture Indicator. If indicator is BLUE, no action is required. If indicator is PINK or WHITE, perform the Manual Purge Procedure.
O
It is normal for oil & water to accumulate in the drain container.
I
E
92
1
US
C. Empty Drain Container.
L
A #A C
85
AA142600i
Manual Purge Procedure Monthly A. Check Pressurization Time. Watch the Storage Air gauge as the compressor runs. Record the time it takes to go from 80 PSI to 100 PSI.
MANUAL PURGE VALVE
Drain Container
(NORMALLY CLOSED)
80
10 0
WET
It should take approximately 15 to 45 seconds. [Contact your dealer if significantly out of range]
AA142500i
B. Clean / Dust Compressor. Wipe with a clean cloth to remove dust & debris.
A. Open the Manual Purge Valve. Storage Air
DRY
Moisture Indicator
Turn knob counter-clockwise. AA142401i
B. Run compressor for two minutes. C. Close the Manual Purge Valve. Turn knob clockwise.
D. Repeat this procedure several times per day, for one week. If indicator is still pink after one week, contact service technician
Annually Air Intake Filter
A. Change Oil. Change oil in each compressor. example: Single model (shown): one compressor Twin models: two compressors Triple models: three compressors Quad models: four compressors
Ultra-Air Filter Element
Maintenance Guide Lubricated Compressors
B. Replace Air Intake Filter.
O-ring
There is one air intake filter for each compressor.
C. Replace Ultra-Air Filter Element & O-ring All models have only one Ultra-Air Filter.
Maintenance Parts & Kits Parts Description Order Number Oil ............................................. ACA85921 Red/Green Indicator ................ AAP85210 Underloader Valve ................... PVV50526
To ensure years of reliable service, follow the maintenance schedule outlined in this guide. If service is required, contact your authorized Apollo by Midmark dealer. Dealer (name / phone):
__________________________________ __________________________________ __________________________________ __________________ __________________ Date of Purchase: _________________ Model Number: Serial Number:
Kits
Annual Maintenance Log
To drain oil from compressor... A.
Place a pan under the drain plug, then remove drain plug. B. Loosen front mounting nuts. Remove rear mounting nuts. C. Tip compressor forward to drain all oil.
AA142800i
Drain Plug
AA142700i Style D
Kits include: Ultra-Air Filter Element (qty. 1) O-ring (qty. 1) Apollo Compressor Oil (16 oz. / per compressor) Air Intake Filter (qty.1 / per compressor)
Description Order Number Single Compressor Kit ............. ACA85400 Twin Compressor Kit ................ ACA85401 Triple Compressor Kit .............. ACA85402 Quad Compressor Kit .............. ACA85407
Date:
Services Performed:
Technician:
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
_____
_______________________
__________
© Midmark Corporation 2005
003-1549-00 Rev. C
