Transcript
I56-5100-000
INSTALLATION AND MAINTENANCE INSTRUCTIONS
3825 Ohio Avenue, St. Charles, Illinois 60174 800/736-7672, FAX: 630/377-6495 www.systemsensor.com
L-Series Back Boxes GENERAL DESCRIPTION The L Series surface mount back boxes are designed to fit System Sensor L-series devices. They provide a hard surface mounting option for surfaces such as concrete and brick. Models are available in wall and ceiling mounting formats, red and white color options and by device type see below for specific model numbers and descriptions.
MODEL REFERENCE
The L series surface mount back boxes include a grounding plate and grounding screw for electrical grounding and threaded knockout holes for ¾ inch conduit adapters. (See Figure 1.) INSTALLATION Refer to the System Sensor device manual for specific installation and mounting instructions.
Model
Description
Color
SBBRL
Wall Surface Mount Back Box, 4x4 Horn, Strobes and Horn Strobes
Red
SBBWL
Wall Surface Mount Back Box, 4x4 Horn, Strobes and Horn Strobes
White
SBBGRL
Wall Surface Mount Back Box, 2x4 Horn, Strobes and Horn Strobes
Red
SBBGWL
Wall Surface Mount Back Box, 2x4 Horn, Strobes and Horn Strobes
White
SBBCRL
Ceiling Surface Mount Back Box, Horn, Strobes, Horn Strobes, Speakers and Speaker Strobes
Red
SBBCWL
Ceiling Surface Mount Back Box, Horn, Strobes, Horn Strobes, Speakers and Speaker Strobes
White
SBBSPRL
Wall Surface Mount Back Box, Speakers and Speaker Strobes
Red
SBBSPWL
Wall Surface Mount Back Box, Speakers and Speaker Strobes
White
FIGURE 1. SURFACE MOUNT BACK BOX Grounding screw and grounding plate
Grounding screw and grounding plate
Grounding screw and grounding plate
Knock-outs
Knock-outs
Knock-outs
A0524-00
Grounding screw and grounding plate
A0525-00
Knock-outs
System Sensor® is a registered trademark of Honeywell International, Inc.
1
I56-5100-000 ©2016 System Sensor. 09-01
