Transcript
Setsco Services Pte Ltd 18 Teban Gardens Crescent Singapore 608925
Certificate No.
:
LA-2012-0519-E
Issue No.
:
5
Date
:
29 February 2016
Page
:
1 of 4
FIELD OF TESTING: ELECTRICAL TESTING MATERIALS/ PRODUCTS TESTED 1. General Requirements
TEST/PROPERTIES
Full Test
STANDARD METHODS/ TECHNIQUES IEC 60335-1: 2006 Ed 4.2 IEC 60335-1: 2010 Ed 5
2. Electrical Irons
Full Test
IEC 60335-2-3: 2002+Amd 1: 2004 Ed 5.1
3. Stationary Cooking Ranges, Hobs, Ovens and similar appliances
Full Test
IEC 60335-2-6: 2002 Ed 5
4. Grills, Toasters and similar appliances
Full Test
IEC 60335-2-9: 2004+Amd 1: 2004 Ed 5.1 IEC 60335-2-9: 2008 Ed 6
5. Deep Fat Fryers, Frying Pans and similar appliances
Full Test
IEC 60335-2-13: 2002 Ed 5 IEC 60335-2-13: 2009 Ed 6
6. Appliances for Heating Liquids
Full Test
IEC 60335-2-15: 2008 Ed 5.2
7. Appliances for Skin or Hair
Full Test
IEC 60335-2-23: 2008 Ed 5.1
Full Test
IEC 60335-2-35: 2002 Ed 4 SS 146 Part 2-5: 2007
Care 8. Instantaneous Water Heaters
Certificate No. :
LA-2012-0519-E
Issue No. :
5
Date
29 February 2016
Page
2 of 4
:
MATERIALS/ PRODUCTS TESTED 9.
Fans
:
TEST/PROPERTIES
STANDARD METHODS/ TECHNIQUES
Full Test
IEC 60335-2-80:2002+Amd 1:2004 Ed 2.1
10. Battery-Operated Emergency Power Supply
Full Test
SS 209:1996
11. IP Test
IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 IP1X, IP2X, IP3X, IP4X, IP5X, IP6X
IEC 60529: 2001 + Amd 1: 1999 Ed 2.1
12. Safety of Household and Similar Electrical Appliances
Full Test
SS 146 Part 1: 2004 SS 146 Part 1: 2008
13. Toilet Seat
x
JIS A4422 Clause 9.6.1: 1986
x x x x
Insulation resistance test Moisture proof insulation resistance test Withstand voltage test Ordinary temperature test Abnormal temperature test
JIS A4422 Clause 9.6.2: 1986 JIS A4422 Clause 9.6.3: 1986 JIS A4422 Clause 9.7: 1986 JIS A4422 Clause 9.8: 1986
14. Fire Alarm Panel
Full Test (EMC/ESD/Vibration tests are subcontracted)
BS EN 54-2: 1997 + A1: 2006 BS EN 54-4: 1998 + A1: 2002 & A2: 2006 SS CP 10: 2005
15. Vacuum Cleaner
Full Test
IEC 60335-2-2: 2002 Ed 5 + Amd 1: 2004 IEC 60335-2-2: 2009 Ed 6
16. Spin Extractors
Full Test
IEC 60335-2-4: 2002 Ed 5 + Amd 1: 2004 IEC 60335-2-4: 2012 Ed 6.1
17. Washing Machine
Full Test
IEC 60335-2-7: 2002 Ed 6 + Amd 1: 2004 IEC 60335-2-7: 2008 Ed 7
Certificate No. :
LA-2012-0519-E
Issue No. :
5
Date
29 February 2016
Page
3 of 4
:
MATERIALS/ PRODUCTS TESTED 18. Tumble Dryers
:
TEST/PROPERTIES
STANDARD METHODS/ TECHNIQUES
Full Test
IEC 60335-2-11: 2003 Ed 6.1
Drying Tests
IEC 60335-2-11: 2008 Ed 7 IEC 61121: 2005 Ed 3.1 - Clause 9.2.1 - NEA Requirements
19. Storage Water Heater
Full Test
IEC 60335-2-21: 2002 Ed 5 IEC 60335-2-21: 2009 Ed 5.2 SS 146 Part 2.8: 2007
20. Clothes Washing Machine for Household use - Method for measuring the performance
Determination of water & energy consumption
Clause 8.6 – IEC 60456: 2010 Ed 5 PUB WELS Guidebook: Mar 2013
21. Humidifiers
Full Test
IEC 60335-2-98: 2002 Ed 2
22. Battery Chargers
Full Test
IEC 60335-2-29: 2002 Ed 4 + Amd 1: 2004
23. Portable General Purposes Luminaires
Full Test
IEC 60598-2-4: 1997 Ed 2
24. Luminaires
Full Test
IEC 60598-1: 1999 Ed 5
25. Household Electrical Appliances x Measurement of Standby Power
Full Test
IEC 62301: 2011 Ed 2
26. Isolating Transformers (up to 4 kVA single phase)
Full Test
IEC 61558-1: 2005 Ed 2.0 IEC 61558-2-6: 2009 Ed 2.0
27. Switch Mode Power Supplies
Exclude: Clause 18.102: Partial Discharge Test
IEC 61558-2-16: 2009+AMD1: 2013 Ed 1.1
Certificate No. :
LA-2012-0519-E
Issue No. :
5
Date
29 February 2016
Page
4 of 4
:
MATERIALS/ PRODUCTS TESTED 28. Uninterruptible Power System
:
TEST/PROPERTIES
Exclude: x Clause 3.3.3: Non-linear Load Test
STANDARD METHODS/ TECHNIQUES IEC 62040-1: 2008 Ed 1.0
x Clause 9: Connection to Telecommunication Network 29. D.C. or A.C. Supplied Electronic Control Gear for LED Modules
Full Test
IEC 61347-2-13: 2006 Ed 1.0
Approved Signatories: Edwin Leong - For all tests except item 10 Richard Lim - For all tests
Note: This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025:2005. A laboratory's fulfilment of the requirements of ISO/IEC 17025:2005 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements In ISO/IEC 17025:2005 (Section 4) are written in language relevant to laboratory operations and meet the principles of ISO 9001:2008 Quality Management Systems — Requirements and are aligned with its pertinent requirements.
