Transcript
Christie LA1 Line array speaker Advanced ribbon driver line array for cinema The Christie® LA1 line array speaker combines advanced ribbon driver technology with a unique coaxial articulated line array design to provide greatly enhanced clarity, dramatically reduced distortion and ultra-fast transient response. The extremely low mass of the ribbon drivers allows the Christie LA1 to respond very quickly to signals. This eliminates the effects of high frequency breakup and power compression while enabling extended high frequency response and the accurate reproduction of the original source material.
Key features Christie exclusive single enclosure coaxial articulated line array design
Extremely even coverage, typically ± 2dB SPL throughout entire audience area
9 x 3.5" ribbon drivers and 6 x 5.25" paper/Kevlar composite cone woofers
Approximately four times the optimal listening area than typical systems
Dramatically higher RMS to peak max SPL ratio than compression driver systems
Enhanced voice intelligibility, low distortion and highly controlled dispersion Limited five year warranty
MANUFACTURED ACCORDING TO CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01:
" PACKAGING LABELING AND MATERIAL GUIDELINE " 3. REFER TO SUPPLIER QUALITY STANDARD 010-101164-01
5.08 129.00
FOR GENERAL QUALITY REQUIREMENTS AND PRACTICES, AND FOR CRITICAL FEATURE INSPECTION METHODS
Sound exactly where it is needed
IF INDICATED WITH
ON THIS SPECIFICATION
Front view
4. NOT ALL DIMENSIONS SHOWN. REFER TO CAD MATH DATA FOR DETAILS
10.40 264.00
5. WHEN DATUMS ARE SPECIFIED, CAD MATH DATA AND
The Christie LA1 features very wide 120° horizontal dispersion FOLLOWING PROFILE TOLERANCE APPLIES: 6. PARTS MUST BE CLEANED TO REMOVE DEBRIS, OILS, and highly controlled 30° vertical dispersion patterns – placing RESIDUE OR OTHER CONTAMINANTS PRIOR TO SHIPPING sound exactly where it is needed. The Christie LA1 has a 2-way linear phase, internal passive crossover and can be 51.2 1300 combined with the Christie S115 subwoofer to create a 3-way, bi-amplified, full range speaker/sub system, ideal as a screen channel for ±100 seat auditoriums.NOTES: It is extremely versatile with 1. ALL MATERIALS AND PROCESSES MUST CONFORM TO THE CHRISTIE SPECIFICATION 010-100594 a range of applications and installation options, from being 2. PACKING FILLERS, BOXES AND LABELS MUST BE MANUFACTURED ACCORDING TO mounted to flown. UNDIMENSIONED FEATURES ARE BASIC, AND THE
9.40 238.00
1.69 43.00
24.0 608
32.60 829.00 REVISION HISTORY OF REV
DESCRIPTION OF CHANGE
BY
1.69 43.00
CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01:
5.08 129.00
" PACKAGING LABELING AND MATERIAL GUIDELINE " 3. REFER TO SUPPLIER QUALITY STANDARD 010-101164-01
5.08 129.00
Side view
FOR GENERAL QUALITY REQUIREMENTS AND PRACTICES, AND FOR CRITICAL FEATURE INSPECTION METHODS
IF INDICATED WITH
ON THIS SPECIFICATION MODEL REV:
4. NOT ALL DIMENSIONS SHOWN. REFER TO CAD MATH Specifications DATA FOR DETAILS
USED ON:
5. WHEN DATUMS ribbon ARE SPECIFIED, CAD MATH DATAarray, AND articulated driver line 2-way, passive, UNDIMENSIONED FEATURES ARE BASIC, AND THE in a single FOLLOWING sealed PROFILE enclosure TOLERANCE APPLIES: ® BE CLEANED TO REMOVE DEBRIS, OILS, • 9 x 3.5" Kapton 6. PARTS MUST ribbon drivers with Neodymium magnets Driver components RESIDUE OR OTHER CONTAMINANTS PRIOR TO SHIPPING • 6 x 5.25" paper/Kevlar composite mid-bass cone drivers • Linear phase, asymmetric, 2-way, passive @ 1.6 kHz, 24dB/octave Crossover • 80Hz-20kHz @ -6dB Frequency response1 • 123dB (AES) continuous • 135dB peak Maximum SPL2 32.60 • 120° horizontal dispersion • 30° vertical dispersion System coverage3 829.00 • 95dB (200Hz-3kHz) Sensitivity1, 1W/1m • 600W (AES) continuous • 1200W (IEC) short term Power handling2 • 450-825W (FTC) @ 8 ohms Recommended amplifier power • 8 ohms Rated impedance • 2 position barrier strip Input connectors 51.2 1300 • Closed box alignment • 18mm marine plywood Enclosure • Heavily damped and braced • On subwoofer using BKT-LA1 Tilt bracket Mounting options NOTES: NOTES: • Flown under subwoofer using BKL-LA1 “L” bracket 1. ALL MATERIALS AND PROCESSES MUST CONFORM 1. ALL MATERIALS AND PROCESSES MUST CONFORM • Wall mounted using 4 x M8 points TO THE CHRISTIE SPECIFICATION 010-100594 TO THE CHRISTIE SPECIFICATION 010-100594 1.69 43.00 2. PACKING FILLERS, BOXES AND LABELS MUST BE • Individually flown using 3 x M10 points 2. PACKING FILLERS, BOXES AND LABELS MUST BE MANUFACTURED ACCORDING TO ACCORDING TO • Includes a total of 7 x M10 fly points MANUFACTURED for total versatility CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01: CHRISTIE DIGITAL SYSTEMS STANDARD # 010-101136-01: • Christie " PACKAGING LABELING AND MATERIAL GUIDELINE "S115 subwoofer (145-108100-01) Accessories (optional) " PACKAGING LABELING AND MATERIAL GUIDELINE " 3. REFER TO SUPPLIER QUALITY STANDARD 010-101164-01 5.08 • BKT-LA1 3. REFER SUPPLIER QUALITY 010-101164-01 Tilt bracket (145-116109-01) forTOmounting onSTANDARD Christie S115 129.00 FOR GENERAL QUALITY REQUIREMENTS AND PRACTICES, GENERAL QUALITY REQUIREMENTS AND PRACTICES, • BKL-LA1 “L” bracket (145-117100-01)FOR for flying under Christie S115 AND FOR CRITICAL FEATURE INSPECTION METHODS AND FOR CRITICAL FEATURE INSPECTION METHODS • Allen Products MultiMount MM-024 (111-681207-01) IF INDICATED WITH ON THIS SPECIFICATION IF INDICATED WITH ON THIS SPECIFICATION 4. NOT ALL DIMENSIONS SHOWN. REFERor TO CAD MATH MM-060 (111-682208-01) for wall4.mounting NOT ALL DIMENSIONS SHOWN. REFER TO CAD MATH DATA FOR DETAILS FOR DETAILS • 3 x Allen Products RK-1C Rigging KitDATA 1 x Cable (111-685202-01)4 5. WHEN DATUMS ARE SPECIFIED, CAD MATH DATA AND 5. WHEN DATUMS ARE SPECIFIED, CAD MATH DATA AND • (LxWxH) UNDIMENSIONED FEATURES ARE BASIC, AND THE 10.4 x 9.4 x 32.6" (264 x 238UNDIMENSIONED x 829mm)FEATURES ARE BASIC, AND THE Dimensions 9.40 FOLLOWING PROFILE TOLERANCE APPLIES: FOLLOWING PROFILE TOLERANCE 238.00 APPLIES: • Net weight 6. PARTS MUST BE CLEANED TO REMOVE39.5lbs DEBRIS, OILS,(18kg) 6. PARTS MUST BE CLEANED TO REMOVE DEBRIS, OILS, RESIDUE OR OTHER CONTAMINANTS TO SHIPPING • PRIOR RESIDUE OR OTHER CONTAMINANTS PRIOR TO SHIPPING Limited five year warranty Warranty
System type
LA1
MECH. REF # :
• Coaxial
MATERIAL:
DEBURRING:
9.40 238.00
Top view
UNITS : MILLIMETRES REV UNLESS OTHERWISE SPECIFIED
NONE
MARK PART NO & VENDOR CODE (SUPPLIED BY CDS) IN LOCATION SHOWN NONE
MICROINCH 63
10.40 264.00
REVISION HISTORY OF DRAWN BY:
BY
DRAWN DATE:
MODEL REV: MECH. REF # :
Christie Digital Systems Canada Inc. Canada – Kitchener ph: 519 744 8005
Brazil ph: +55 (11) 2548 4753 China (Beijing) ph: +86 10 6561 0240 China (Shanghai) ph: +86 21 6278 7708
USED ON:
LA1 Echo
FINISH:
France COATING: NONE ph: +33 (0) 1 41 MARK 21PART 44NO 04 & VENDOR CODE I.D :
(SUPPLIED BY CDS) IN LOCATION SHOWN NONE
Germany SIMILAR TO: ph: +49 2161 664540
India ph: +91 (080) 6708 9999
UNITS :
MILLIMETRES
UNLESS OTHERWISE SPECIFIED
Japan (Tokyo) ph: 81 3 3599 7481
INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M-1994 ALL DIMENSIONS SHOWN APPLY BEFORE PLATINGS AND COATINGS TOLERANCES APPLY AS SHOWN BELOW OTHERWISE, SEE NOTE 5 INCHES MILLIMETRES DECIMAL PLACES ± .005 .XXX ± 0.1 ± .010 .XX ± 0.3 ± .020 .X ± 0.5 ANGULAR DIMENSIONS
PROPRIETARY NOT TO BE DISCLOSED OR REPRODUCED IN ANY MANNER WITHOUT THE EXPRESS WRITTEN PERMISSION OF CHRISTIE
SIZE
THIRD ANGLE PROJECTION
Korea (Seoul) ph: +82 2 702 1601
Republic of South Africa ph: +27 (0)11 510 0094 XX° XX.X° SURFACE ROUGHNESS
± 0.5º ± 0.1º
MICROINCH 63
Singapore ph: +65 6877 8737 Spain ph: +34 91 633 9990
MICRON 1.6
NUMBER
B
SCALE
MICRON 1.6
MASS
1:10 5.08 129.00
14.92 379.00
32.60 829.00
DRAWN BY:
1.69 43.00
UNITS :CHRISTIEMILLIMETRES DIGITAL SYSTEMS
DESCRIPTION
NONE United Kingdom FINISH: ph: +44 (0) 118 977 8000NONE
NOT TO BE DISCLOSED OR REPRODUCED IN ANY MANNER WITHOUT THE EXPRESS WRITTEN PERMISSION OF CHRISTIE
SIZE
THIRD ANGLE PROJECTION
B
COATING:
NUMBER
MARK PART NO & VENDOR CODE (SUPPLIED BY CDS) MASSIN LOCATION SHOWN LBS[ NONE
Independent sales1:10 consultant offices SCALE
I.D :
SIMILAR TO:
Italy ph: +39 (0) 2 9902 1161
For the most current specification information, please visit www.christiedigital.com Copyright 2015 Christie Digital Systems USA, Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks or tradenames of their respective holders. Christie Digital Systems Canada Inc.’s management system is registered to ISO 9001 and ISO 14001. Performance specifications are typical. Due to constant research, specifications are subject to change without notice. Printed in Canada on recycled paper. 3923 Jan 15
DRAWN BY: DRAWN DATE:
INTERPRET DIMENSIONS ANDDIGITAL TOLERANCES CHRISTIE SYSTEMS APPROVED BY: PER ASME Y14.5M-1994 CANADA INC. ALL DIMENSIONS SHOWN APPLY BEFORE APPROVAL DATE: PLATINGS AND COATINGS TOLERANCES APPLY AS SHOWN BELOW OTHERWISE, SEE NOTE 5 PROPRIETARY INCHES MILLIMETRES NOT TO BE DISCLOSED OR REPRODUCED IN ANY DECIMAL PLACES MANNER WITHOUT THE EXPRESS WRITTEN ± .005 .XXX ± 0.1 PERMISSION OF CHRISTIE ± .010 .XX ± 0.3 REVISION ± .020 .X ± 0.5 ANGULAR DIMENSIONS THIRD ANGLE PROJECTION
BREAK ALL EDGES FOR SAFE HANDLING
DEBURRING:
14.92 379.00
5.08 129.00
USA, INC. UNLESS OTHERWISE SPECIFIED
Echo
APPROVAL DATE:
PROPRIETARY
5.31 135.00
5.00 127.00
LA1
USED ON:
1
1.38 35.00
12.56 319.00
MODEL REV: MECH. REF # :
United Arab Emirates ph: +971 4 3206688MATERIAL:
SHEET
9.40 238.00
2.76 70.00
DRAWN DATE:
LBS[ KG]
10.40 264.00
1.38 35.00
APPROVED BY:
CHRISTIE DIGITALREV SYS USA, INC. CHRISTIE DIGITAL SYS CANADA INC
1.69 43.00 DESCRIPTION
APPROVAL DATE:
5.08 129.00
Eastern Europe and MATERIAL: Russian Federation BREAK ALL EDGES FOR SAFE DEBURRING: ph: +36 (0) 1 47HANDLING 48 100 NONE
DATE UPDATED
Back view
1.69 43.00
Australia ph: +61 (0) 7 3624 4888
B
SCA
12.56 319.00
APPROVED BY:
5.31 135.00
easured at distances of 4m and 8m, in free field and on ground plane. Sensitivity is calculated based on measured M SPL response averaged in 200Hz-3kHz range and scaled back to 1m. 2 AES refers to AES2-2012 standard. IEC refers to IEC 60268-5 standard. Max continuous SPL calculated based on sensitivity 32.60 and AES power handling. IEC short-term power tested using IEC pink noise with 9dB crest factor. The crest factor was specifically 829.00 increased to reflect real-life parameters of digital cinema sound tracks. Maximum peak SPL calculated using peak voltage during IEC short-term power test. 3 Averaged in 500Hz-16kHz range, at -6dB. Screen scattering effect will result in slight increase of coverage at HF. 4 3 cables required when flown. See User Manual for details.
Christie Digital Systems USA, Inc. USA – Cypress ph: 714 236 8610
SIZE
THIRD ANGLE PROJECTION
MICRON 1.6
2. 70
± 0.5º ± 0.1º
XX° XX.X° SURFACE ROUGHNESS
1
Worldwide offices
MICROINCH 63
14.92 379.00
DESCRIPTION OF CHANGE
INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M-1994 ALL DIMENSIONS SHOWN APPLY BEFORE PLATINGS AND COATINGS TOLERANCES APPLY AS SHOWN BELOW OTHERWISE, SEE NOTE 5 INCHES MILLIMETRES DECIMAL PLACES ± .005 .XXX ± 0.1 ± .010 .XX ± 0.3 ± .020 .X ± 0.5 ANGULAR DIMENSIONS
NONE
Corporate offices
DESC
5.08 51.2 129.00 1300
FINISH:
I.D :
PROPRIETARY NOT TO BE DISCLOSED OR REPRODUCED IN ANY MANNER WITHOUT THE EXPRESS WRITTEN PERMISSION OF CHRISTIE
24.0 608
BREAK ALL EDGES FOR SAFE HANDLING
SIMILAR TO:
APPROVAL DATE:
± 0.5º ± 0.1º
XX° XX.X° SURFACE ROUGHNESS
24.0 608
MATERIAL:
COATING:
APPROVED BY:
5.00 127.00
Echo
DEBURRING:
MARK PART NO & VENDOR CODE (SUPPLIED BY CDS) IN LOCATION SHOWN NONE
1.69 43.00
LA1
USED ON:
1.38 35.00
NONE
SIMILAR TO:
DRAWN DATE:
5.31 135.00
BREAK ALL EDGES FOR SAFE HANDLING NONE
I.D :
DRAWN BY:
MILLIMETRES
UNLESS OTHERWISE SPECIFIED INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M-1994 ALL DIMENSIONS SHOWN APPLY BEFORE PLATINGS AND COATINGS TOLERANCES APPLY AS SHOWN BELOW OTHERWISE, SEE NOTE 5 INCHES MILLIMETRES DECIMAL PLACES ± .005 .XXX ± 0.1 ± .010 .XX ± 0.3 ± .020 .X ± 0.5 ANGULAR DIMENSIONS
FINISH:
COATING:
MODEL REV:
MECH. REF # :
UNITS :
10.40 264.00
Echo
KG]
XX° XX.X° SURFACE ROUGHNESS
± 0.5º ± 0.1º
SHEET
MICROINCH 63
1MICRONOF 1.6
1
DESCRIPTION
SIZE
B
SCALE
NUMBER
1:10
M
