Transcript
we leave a mark.
Labelling systems
semket Etikettiersysteme GmbH Tiroler Straße 9, 3105 St. Pölten-Radlberg Tel: +43 (0) 2742 / 47 0 47 0 Fax: +43 (0) 2742 / 47 0 47 90
[email protected] www.semket.com
LABEL PRINTER XC4 and XC6
Issue: 15-08-31.08
TWO-COLOR PRINTING www.semket.com
Label printer XC4, XC6 XC4 - New opportunities are opening up in the field of product labelling with the XC series, which now allows simultaneous two-color printing. The XC4 meets the conditions for the classification and labelling inventory for chemical products according to GHS. The electronics, the control panel and the two print units are adopted from the industrial printers of the A+ series. XC6 - Besides the chemical industry there are many other areas where broader labels are to be printed in two colors. This is easily achieved with the powerful XC6. Here too larger quantities of labels are printed quickly and variably and are ready for further processing.
2
6
8
Technical Data Print resolution Print speed up to Print width Material
1
XC4
Print head Print method
dpi mm/s mm
Labels or fanfolded
3
4 7
2
1
5
1 Big graphic display White backlight for optimum readability. 2 Ribbon holder Simple and centered insertion of the ribbon with the three part tightening axles. The imprinted rule on spindle simplifies ribbon positioning. 3 Straightforward adjustment The printhead is pressed down by sliding toggles. One is mounted to the left label margin, the other is pushed to the right label margin. 4 Peripheral connection Add-on modules are easy to connect. All peripherals are connected to the printer in a matter of seconds using two pins and fixed in place with a screw. 5 Solid metal housing Made of die-cast aluminium. All components are mounted on it. 6 Roll holder For labels up to a diameter of 300 mm. Swing lever and integrated brake make sure that the labels are unwound with constant tension. 7 Ribbon saver for printhead 1 The ribbon saver is used for labels to be partially printed. The printhead is lifted in the unprinted area and the ribbon is stopped during label feeding. 8 Fanfold guide Fanfolded labels are positioned behind the print unit. Guide and additional brake ensure a reliable feeding to the print unit.
Material thickness mm / weight g / m2 Width Labels1) continuous material / liner Height1) without back-feed when dispensing1) Media roll Outside diameter Core diameter Winding Ribbon Ink Roll diameter Core diameter Ribbon length variable Width2) Printer Dimensions Height x Depth x Width Weight Label sensor
mm mm from mm up to mm up to mm mm
up to mm mm up to m up to mm mm kg
Gap sensor Reflective sensor from the bottom / optional from the top Distance to locating edge mm Electronics Processor 32 Bit clock rate MHz RAM MB Memory IFFS MB Flash Slot for CompactFlash Type I memory card Slot for Wireless LAN card Battery buffer for real-time clock, printout of time and date, data storage on shut-down Warning signal: acoustic signal in case of error Interfaces USB 2.0 High Speed Slave for PC connection Ethernet 10 / 100 Base T, LPD, RawIP-Printing, ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP Peripheral connection WLAN Card 802.11b/g WEP/WPA PSK (TKIP) 2 x USB master for external operation panel, keyboard, scanner, service key, USB flash drive Operating data Power supply Power consumption Temperature / humidity Operation: Stock: Transport: Approvals Options Cut labels Perforate labels Rewind labels Stack labels
105,6
■ Standard
Option
XC6
Thermal transfer 300 125
162,6
Paper, cardboard, textile, plastics such as PET, PE, PP, PI, PVC, PU, acrylate 0,05 - 0,2 / 60 - 180 20 - 116 46 - 176 24 - 120 50 - 180 20 2000 1500 300 76 Outside or inside
114
Outside or inside 72 25 360
395 x 554 x 248 22
165
395 x 554 x 358 24
For leading edge or punch marks and end of material For print marks 5 - 53 266 64 8 ■ ■ ■ ■ ■ ■ ■ ■ 100 - 240 VAC ~ 50 / 60 Hz, PFC 100 - 300 W depending on type of printer + 5 - 40°C / 10 - 85% not condensing + 0 - 60°C / 20 - 80% not condensing – 25 - 60°C / 20 - 80% not condensing CE, FCC class A, CB, CCC, UL
-
Limitations may apply to small labels, thin materials or strong adhesives. These applications need to be tested and approved. 2) The ribbon should roughly be the same width as the label in order to avoid folding. 1)
2
www.semket.com
