Transcript
LABLINK - I/O Port Output to RF Converter for use with new Sky™ HD receivers 10 pin din connection to I/O port on Sky receiver
Provides an RF output for the latest Sky HD set top boxes with no RF output of their own • Converts the signal from the Sky™ I/O port to an RF output • Connects to a TV distribution system to allow viewing and IR remote control from multiple locations • Converts the signal from the Sky™ I/O port to an RF output • Aerial loop through for Freeview signal distribution • Fully compatible with new and existing TV distribution systems • Allows the use of existing RF Link devices used to distribute Sky™ signals and control remotely Sky™ receivers
Input for aerial loop through
Please Note: Link compatible distribution amplifier required for multiple room systems. An RF Link device is required at each TV location (not supplied). Additional remote controls may be required.
Combined RF signal from Sky™ I/O and aerial
Sky+HD Receiver Dish IN
I/O Port
LabLink
Satellite Dish
HDMI/SCART connection
TV Aerial
MAIN TV
Splitter required for aerial signal (not supplied)
DigiLink compatible amplifier DigiLink
DigiLink
TV
TV
DigiLink
DigiLink
TV TV Note: DigiLinks and leads shown are not supplied
Sales Hotline: 01234 26 37 37 Email:
[email protected]
Sales Fax: 01234 26 74 00 Web: www.labgear.co.uk
