Preview only show first 10 pages with watermark. For full document please download

Laboa Headlab Opto-adaptor

   EMBED

Share

Transcript

HEAD DD ata Sheet atenblatt Ebertstraße 30a 52134 Herzogenrath Tel.: +49 2407 577-0 Fax: +49 2407 577-99 eMail: [email protected] Web: www.head-acoustics.de labOA (Code 3785) HEADlab Opto-Adaptor Overview The optical adaptor labOA can be used to transfer data within a ­HEADlab system across a distance of up to one kilometer (0.6 miles) via optical cables, offering users high flexibility when designing their measurement setup. For data transmission between a controller and a input module, two labOA adaptors and an additional power supply unit are required. Features Scope of Supply Optional yy Data transmission within a HEADlab system via optical cables across a distance of up to 1000 meters yy labOA (Code 3785) HEADlab optical/electrical adaptor for data transmission between controller and input module across a distance of up to 1000 m yy Optical cable Fiber optics patch cable multimode, duplex, SC/PC ↔ SC/PC yy Easy handling yy Two labOA adaptors required for data transmission between controller and input module yy labPWR I.1 (Code 3711) Power box for HEADlab systems (up to max. 40 W) yy labPWR I.2 (Code 3712) Power box for HEADlab systems (up to max. 100 W) yy Power supply to the first labOA via the controller; the second labOA is powered by a power box or the power adapter M6052 yy Power adapter 24 V / 60 W / LEMO 4-pin 90 to 275 V AC, 50 to 60 Hz Configuration: HEADlab-System with labOA Controller labOA (1) HEADlink ADAT up to 1000 m labOA (2) Input Module Power Power labPWR / Power Adapter Technical Data labOA Input voltage: Power consumption: Weight: 6.5 - 34 V, nominal 24 V ca. 1.5 W ca. 120 g (0.26 Ib) Dimensions: 55 x 24 x 84 mm (WxHxD) (2.17“ x 0.94“ x 3.3“) 06.2017 D3785e3 Subject to change