Transcript
Ladies' Date/Time Watch Silver Expansion Band TIM-142-511-3111 _____________________________________________________________ Your watch is a voice and hand-synchronizing analog talking watch with both male and female voices and alarm. The hands of the watch are always synched to the voice announcement of your watch so there is only one easy setup and no question about what time it really is. One press of the button will tell you the time, a second press of the button will tell you the date, and a third press of the button will announce the alarm setting. NOTE: Never use the crown/stem to set the time as the watch will require a reset if the crown is moved.
Watch Orientation: The S1 button is located at the 2 o'clock position. The crown/stem is located at the 3 o'clock position. The S2 button which is recessed is located at the 4 o'clock position. Please use a pen to gently press inward to activate this button. Announcements: Press the button at the 2 o'clock position (S1) to announce the time. The watch will announce the hour and the minutes. Press the button at the 2 o'clock position (S1) twice to announce the date. The date is announced, month, day and year. Press the button at the 2 o'clock position (S1) three times to announce the alarm time and whether the alarm is on of off.
Synchronize Hands to Match Time Announcement: 1. Pull out the crown/stem of the watch when the second hand runs to 12 o'clock. The second hand will stop at 12 o'clock. If you miss the 12 o'clock, you need to wait for the next opportunity. 2. Turn the crown/stem of the watch to set the hour and minute hands pointing at 12 o'clock. Now the hour, minute and second hand are all pointing at 12 o'clock with the crown pulled out. 3. Press and hold the button at the 2 o'clock position (S1) for more than 5 seconds with the crown/stem pulled out. 4. After five seconds, push in the crown/stem while still pressing the 2 o'clock (S1) button. The watch hands will begin to spin to match the time previously announced. NOTE: Pressing the button at 2 o'clock (S1) and pushing in the crown/stem should be simultaneous. 5. Please wait until the watch resumes normal operation. Then check to see that the time announcement and watch hands are synchronized by pressing the button at 2 o'clock (S1) once. If they are synchronized, you have successfully reset the watch. If not, repeat the above steps. Voice Selection (Male/Female): Press and hold the button at the 2 o'clock position (S1) until the new voice announces the current time or date. Time Setting: 1. Press the recessed button located at the 4 o'clock position (S2) once. 2. Press the button at the 2 o'clock position (S1) to confirm that you want to change the time. 3. Press the recessed button at the 4 o'clock position (S2) to choose the hour, then press the button at the 2 o'clock position (S1) to confirm the hour. 4. Press the recessed button at the 4 o'clock position (S2) to choose the minute, then press the button at 2 o'clock (S1) to confirm the minute. 5. Press the recessed button at the 4 o'clock position (S2) to choose AM or PM, then press the button at 2 o'clock (S1) to confirm. The time setting will be announced and the hands will synch to the time set. NOTE: When the sync is completed, the time will be announced. this may take several minutes. Date Setting: 1. Press the recessed button at the 4 o'clock position (S2) twice. Press the button at 2 o'clock (S1) to confirm that you want to change the date. 2. Press the recessed button at the 4 o'clock position (S2) to choose the year, then press the button at 2 o'clock (S1) to confirm the year. 3. Press the recessed button at the 4 o'clock position (S2) to choose the month, then press the button at 2 o'clock (S1) to confirm the month.
4. Press the recessed button at the 4 o'clock position (S2) to choose the date, then press the button at 2 o'clock (S1) to confirm the date. 5. Press the recessed button at the 4 o'clock position (S2) to choose the day of the week, then press the button at 2 o'clock (S1) to confirm the day. The date set will be announced. Alarm Setting: 1. Press the recessed button at 4 o'clock (S2) three times. Then press the button at 2 o'clock (S1) to confirm that you want to change the alarm time. 2. Press the recessed button at the 4 o'clock position (S2) to choose the hour, then press the button at 2 o'clock (S1) to confirm the hour. 3. Press the recessed button at the 4 o'clock position (S2) to choose the minutes, then press the button at 2 o'clock (S1) to confirm the minute. 4. Press the recessed button at the 4 o'clock position (S2) to choose AM or PM, then press the button at 2 o'clock (S1) to confirm. The alarm time set will be announced. Alarm ON/OFF: 1. Press the recessed button at the 4 o'clock position (S2) four times. Press the button at 2 o'clock (S1) to confirm that you want to change the alarm status. 2. Press the recessed button at the 4 o'clock position (S2) to change the alarm status, then press the button at 2 o'clock (S1) to confirm. The watch will announce if the alarm is on or off. Troubleshooting: Under normal conditions, the watch runs one step every 2 seconds. When the battery level is low, the watch runs one step every 2 seconds. Replace with a new battery. If the time announcement is different from the analog time of the watch, you need to synchronize the hands to match with the time announcement. Refer to the section 'Synchronize Hands to Match Time Announcement' for details. Changing Batteries: There is only one CR2025 type battery inside the watch. This battery is used to drive both the voice announcement as well as the gearbox. When you need to change the battery, it is better to have it changed by a trained jeweler or watch specialist. Their training may avoid damage to the watch. 1. Open the watch at the back. Carefully remove the bottom and make sure you do not lose the waterproof seal. 2. Pick up the battery spring on the right.
3. Remove the battery and insert the replacement battery (polarity "+" is up). 4. Push the battery spring down. 5. Before you put the back on again, make sure the O ring is correctly in place. NOTE: After a new battery is replaced, you need to set the time of your watch again. 6. Set the time and calendar. Refer to the 'Time Setting' and 'Date Setting' section for details. 7. Synchronize the hands to match the talking time that you have set by following the steps in the 'Synchronize Hands to Match Time Announcement' section. Warranty: This watch has a 'Lifetime LIMITED Warranty'. The watch or electronic quartz watch modules from the distributor is warrantied to the original recipient for the lifetime of the timepiece from the original purchase date under normal use and service against defective materials or workmanship. This watch is not water resistant. Care should be taken to avoid contact with liquids. This warranty is void if the watch has been damaged by accident or unreasonable use, neglect, improper service or other causes not arising out of defects in material or workmanship. This warranty does not apply to the case, crystal, attachments (expansion bands, straps, etc.), or batteries.
