Transcript
Choose The Right Certifier LAN Certifier Feature Comparison
Certifies to TIA-T568/T570 Interconnect Standards
√
√
√
√
Option for multimode and single mode fiber testing
√
√
Measures copper cable length
√
√
√
√
Fiber optic dB testing
√
√
√
√
Fiber optic length testing
√
√
Measures cable pair skew (ns)
√
√
Adjustable NVP for accurate TDR length tests
√
√
√
√
Fiber optic Bit Error Rate certification (IEEE 802.3)
√
Active Network Functions
√
Active network DHCP testing
√
√
Includes unique Bit Error Rate tests for Voice over IP (VoIP), IP Video and Data packets
√
Domain Name/ISP Identification
√
√
Bit Error Rate testing at 10, 100 and 1000 megabit speeds
IP address and website ping testing
√
√
√
10, 100, 1000 Mbps port speed identification
√
Port blink on hubs/switches
√
Performs all network functions on copper & fiber
√
Customizable Bit Error Rate Testing Parameters
√
True certification to complete TIA-568-B / TIA-570 Category 5e/6/6a performance standards
√
Provides graphical data plots with TIA-568-B standards compliant dB margin results
√
Compliant with TIA-606 Documentation Standard
√
Standard two year warranty
√
√
Test reports valid for cabling warranty programs Test reports approved by cable/component manufacturers for system headroom/margin guarantee's
√
Removable media for unlimited test storage
√
√
√
Feature Expansion through Modular Adapters
√
Color Display
√
√
√
Accuracy certified by independent testing laboratory to meet TIA requirements
√ √
Frequency and Decibel Measurements Measures cable headroom against TIA-568 standard True frequency sweep testing up to 1GHz
√ √
Certifies cable at over 1000 discrete frequency points
√
Reports Near-End Crosstalk (NEXT) frequency & dB
√
Reports Return Loss frequency & dB
√
Reports Attenuation frequency & dB
√
Reports PowerSum NEXT frequency & dB Reports ACR (Attenuation to Crosstalk Ratio) frequency and dB
√
P-2788 Rev. 0707
√
Fluke Cable IQ™
Fiber Optic Measurements
Copper Cable Testing
Certifies to IEEE 802.3ab Gigabit Standard
Test-Um Validator™ NT 955
Feature
IDEAL SIGNALTEK-FO™
IDEAL LANTEK® Series
Fluke Cable IQ™
Test-Um Validator™ NT 955
IDEAL SIGNALTEK-FO™
IDEAL LANTEK® Series
Feature
Other Features √
Direct report printing to USB laser/inkjet printers
LANTEK
SIGNALTEK
Validator
Cable IQ
Choose The Right Certifier
IDEAL LAN Certifier Specifications LANTEK® Specifications
SIGNALTEK™-FO Specifications
Specifications • Frequency Range
ο ο ο
• • • • • • • • • • • • •
•
• • • •
LANTEK6: 1-350MHz (Up to Category 6/ISO Class E for Gigabit Ethernet) LANTEK6A: 1-500MHz (Up to Category 6A/ISO Class Ea for 10Gig Ethernet)
LANTEK7G: 1-1000MHz (Up to Category 7/ISO Class Fa for 10Gig+ Ethernet and Broadband over Twisted Pair) Length (50-100 Ω cable) 0 – 2000 ft 1 ft ± (3% + 3 ft) Delay 0 – 8000 ns 1 ns ± (3% + 1 ns) Average Impedance 35 – 180 Ω 0.1 Ω ± (3% + 1 Ω) Capacitance (Bulk) 0 – 100 nF 1 pF or 3 dig ± (2% + 20 pF) Capacitance 0 – 100 pF/ft 0.1 pF ± (2% + 1 pF) DC Loop Resistance 0 – 200 Ω Attenuation 1 MHz –1 GHz , Level III/IIIe/IV accuracy (ETL Verified) NEXT 1 MHz –1 GHz, Level III/IIIe/IV accuracy (ETL Verified) Return Loss 1 MHz –1 GHz, Level III/IIIe/IV accuracy (ETL Verified) ELFEXT 1 MHz –1 GHz, Level III/IIIe/IV accuracy (ETL Verified) Noise Floor < –90 dB Dynamic Range > 90 dB Range Resolution Accuracy Standard Test Compliance
ο ο ο
ANSI/TIA/EIA 568B, CAT7/6a(Draft)/6/5e/3, ISO-F/Ea(Draft)/E/D/C, AS/NZS 3080, IEEE 802.3 Ethernet, EN50173, EN50173.A1
Cable Types
ο ο
UTP/ScTP/FTP CAT 3/5e/6/6a(Draft)/7 ISO-C/D/E/Ea/F (Channel and Permanent Link) IBM STP Type 1,2,6 Coax
Dimensions: (Display and Remote) 10.1” × 5.0” × 2.3”, 256mm × 127mm × 58mm Weight: 2.3 lb (1050g) – Display, 2.0 lb (914g) – Remote, 1.2 lb (548g), Battery 1.2 lb (548g) Battery Packs NiMH (rechargeable) Typical Operating Life (Battery) 8 hours
Specifications • Ports/Connections ο USB A/B, DC power input ο Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections ο Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet • SFP850 – 850nm Module ο Class 1 Laser EN60825-1 ο Compatible fiber types: 50/125μm or 62.5/125μm graded index multimode fiber ο Power Output (dBm): -9.5min, -3max ο Receiver Power Range (dBm): 0 to -20 ο Max Link Length: 550m (1800ft) on 50/125mm fiber; 300m (985ft) on 62.5/125mm fiber ο Operating Temperature: -10 to 85°C (14 to 185°F), 85%RH non condensing • SFP13X0 – 1300nm Module ο Class 1 Laser EN60825-1 ο Compatible fiber types: 50/125μm or 62.5/125μm graded index multimode fiber and 9/125μm step index single mode fiber ο Power Output (dBm): -9min, -2.5max ο Receiver Power Range (dBm): 0 to -22 • Max Link Length: 550m (1800ft) on 50/125μm fiber; 300m (985ft) on 62.5/125μm fiber; 10km (6.2mi) on 9/125μm fiber • Operating Temperature: -10 to 85°C (14 to 185°F), 85%RH non condensing • Length Measurement ο RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460ft ο SFP Port: No length measurement of fiber optic cables • Bit Error Rate Measurements ο Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard ο Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard. • Dimensions: Display Handset 7.9” x 3.6” x 1.5” (201mm x 91mm x 38mm); Remote Handset 6.8” x 3.5” x 1.5” (173mm x 89mm x 38mm) • Weight: Display Handset 0.78lb (354g); Remote Handset 0.56lb (255g) without batteries • Battery Life: Standard AA Alkaline Batteries ο Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest) ο Fiber Testing: Recommend use of AC adapters when testing fiber
IDEAL INDUSTRIES, INC. Sycamore IL 60178 800-435-0705 www.idealindustries.com
