Lantek® 6 Lan Cable Certifier

Transcript

LANTEK 6 Data.11/01 12/17/01 1:26 PM Page 1 LANTEK ® 6 LAN Cable Certifier ■ Fully compliant with Category 6/ISO E draft standards ■ Full Category 6/ISO E AutoTest, with graphs in approximately 25 seconds ■ Tests CAT 7/ISO F limits up to 350 MHz ■ Advanced link adapter method provides more versatility and reduces cost of ownership ■ Built in TDR ready for copper and fiber ■ First fiber accessory for a copper tester that traces fiber runs, displays distance to and magnitude of events LANTEK 6 is a fully compliant Category 6/ ISO E cable tester with a frequency range up to 350 MHz. Performing full Category 6/ISO E Autotests with graphs in approximately 25 seconds, LANTEK 6 will get you through your jobs faster than ever. Plus LANTEK 6 is fully upgradeable to LANTEK 7 giving you maximum flexibility as test standards evolve. LANTEK 6 utilizes an advanced link adapter method to reduce cost of ownership. LANTEK 6 comes with a pair of Category 6/ ISO E channel adapters. These channel adapters fit into the case of the unit and are locked in place. This creates a stable and repeatable testing platform while eliminating bulky adapters extending beyond the end of the unit. By simply plugging in a Category 6/ ISO E reference patch cord to the channel adapter, you can now perform Category 6/ ISO E permanent link testing. Should the plug ever wear out the patch cord is replaced rather than the entire assembly reducing lifetime cost of ownership. Among the LANTEK 6 accessories are the the industry’s most advanced fiber options, FIBERTEK and TRACETEK. FIBERTEK enables loss, length, bi-directional testing over two fibers, and talkset over fiber capabilities for 850 and 1300 nm Multimode and 1310 and 1550 nm Singlemode fiber. TRACETEK is the first fiber accessory for a copper tester that will trace a fiber run, locate distance to events along the fiber, and measure the magnitude of the event. This capability can eliminate the need for a more costly OTDR in campus network environments. ■ Display unit comes with 1/4 VGA color screen, remote unit comes with two-line black and white LCD display ■ Serial and USB ports for uploading tests and upgrading firmware ■ Two full-function PCMCIA slots accept compact flash memory and provide for future capabilities LANTEK 6 is fully upgradeable to LANTEK 7, protecting your investment and giving you the maximum flexibility in meeting your evolving certification needs. LANTEK 6 Data.11/01 12/17/01 1:26 PM Page 2 LANTEK ® 6 LAN Cable Certifier The LANTEK 6 display unit comes with the brightest 1/4 VGA color screen in the industry. The remote unit has a two-line black and white LCD display to enhance communications, and can initiate an AutoTest to increase productivity in one-person operations. Both units have an overmolded edge to function in the harshest environments. Along with serial and USB ports, LANTEK 6 comes standard with two full-function PCMCIA slots to accept compact flash memory and provide for future capabilities. This allows for virtually unlimited test storage with graphs keeping your unit in the field. LANTEK 6 comes with LANTEK Reporter PC software that can upload stored tests from the serial or USB ports, or compact flash memory and can create brief, summary, or detailed certification reports for your clients. Get through your jobs faster than ever today and prepare yourself for the future with LANTEK 6. LANTEK 6 Range Resolution Accuracy Length (50- 100 Ω cable) Delay Average Impedance Capacitance (Bulk) Capacitance DC Loop Resistance Attenuation NEXT Return Loss ELFEXT Noise Floor Dynamic Range 0 – 2000 Ft 0 – 8000 ns 35 – 180 Ω 0 – 100 nF 0 – 100 pF/ft. 0 – 200 Ω 1 – 350 MHz 1 – 350 MHz 1 – 350 MHz 1 – 350 MHz < -90 dB > 90 dB 1 ft. 1 ns 0.1 Ω 1 pF or 3 dig 0.1 pF 0.1 Ω 0.1 dB 0.1 dB 0.1 dB 0.1 dB ±(3% + 3 ft.) ±(3% + 1 ns) ±(3% + 1 Ω) ±(2% + 20 pF) ±(2% + 1 pF) ±(1% + 2 Ω) Level III* Level III* Level III* Level III* * Level III only specified to 250 MHz Autotest Storage Capacity (Internal Memory)* No Graphics Up to 6,000 Tests With Graphics Up to 100 Tests LANTEK 6 comes standard with all the items necessary to certify your job and create certification reports: LANTEK 6 LANTEK 6P Soft Carry Case Display unit with battery Remote unit with battery LANTEK Reporter Software Serial and USB cables Two AC wall adapters Two talksets User manual Quick Start Guide Registration Card ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Included are the following adapters and Patch cords: Two Category 6 channel adapters Two Category 6 Reference Patch cords ✔ ✔ ✔ ✔ Premium Package: Hard carry case PCMCIA adapter 32 MB compact flash USB port flash reader for PC Offline battery charger ✔ ✔ ✔ ✔ ✔ Field calibration does not require a special adapter. It is accomplished through connecting a patch cord between the channel adapters. Autotest Storage Capacity (External 32 MB Flash)* No Graphics Up to 24,000 Tests With Graphics * Depending on Autotest Categories Up to 400 Tests with 32 MB Up to 3,200 Tests with 256 MB Autotest time (250 MHz) Approx. 25 seconds Standard Test Compliance ANSI/TIA/EIA 568B, Category 6 (Draft), ISO C/D and ISO E (draft), AS/NZS 3080, IEEE 802.3 Ethernet, EN50173, EN50173.A1 Cable Types UTP/ScTP/FTP; CAT 3/5e/6; ISO C/D/E (Channel, Basic, and Permanent Link) IBM STP Type 1,2,6, Coax Dimensions 10.1” x 5.0” x 2.3” Display & Remote 256mm x 127mm x 58mm Display & Remote Weight 2.3 lb (1050g) – Display 2.0 lb (914g) – Remote 1.2 lb (548g) - Battery Battery Packs NiMH (rechargeable) Typical Operating Life (Battery) 8 hrs Max. Operating Temp. 0°C – 50°C Max. Storage Temp. - 20°C to + 70°C Humidity 5-90 % noncondensing IDEAL INDUSTRIES, INC. 9145 Balboa Av., San Diego, CA 92123 U.S.A. Tel: (858) 279-2955 Fax: (858) 278-5141 Becker Place, Sycamore, IL 60178 U.S.A. Toll-Free: (800) 435-0705 in U.S.A. Becker Place: (815) 895-5181 Ajax, Ontario, L1S 2E1, Canada. Toll-Free: (800) 527-9105 in Canada. Canada: (905) 683-3400 IDEAL INDUSTRIES (U.K.) LTD. 225 Europa Boulevard, Gemini Business Park, Warrington Cheshire WA5 7TN, England Tel: 44-1925-444446 Fax: +44-1925-445501 IDEAL INDUSTRIES GmbH. Gutenbergstrasse 10, 85737 Ismaning, Germany. Tel: +49-89-99686-0 Fax: +49-89-99686-111 www.idealindustries.com Form No. P-2217 © 2001 IDEAL INDUSTRIES, INC. 12/01 PRINTED IN U.S.A.