Transcript
LASAG QFS 50 Fiber Laser Processing System for scribing applications
QFS 5
0
LASA G SWISS PRECISION
Scribing of connecting rod eyes from motorbikes to trucks Scribing of whole engine blocks Scribing of crank shaft bearings
355
A
0
61
SC 90/60
SC 60/60
LASAG QFS 50 Laser source
QFS 50
Laser type
fiber laser
Wavelength
1055 - 1070 nm
Repetition rate
50 - 200 kHz
Pulse duration
150 - 200 ns
Operation mode
Q-switched / pulsed
Output power
50 W
Long-term stability
±1%
Red aiming beam
< 0.2 mW
Optical fiber cable
4.7 m, non-detachable
Minimal bending radius
100 mm
Processing head
FLBK SC 90/60 or FLBK SC 60/60
Dimensions processing head
200 x 540 x approx. 550 mm (w x h x d)
Weight processing head
approx. 9 kg
Motor type
torque motor
Conrod eye
diameter > 35 mm, thickness < 60 mm
Gas nozzle diameter
0.5mm / 1mm
Gas pressure
3 bar typ. / 6 bar max.
Gas type
dry, oil free compressed air
Processing angle
60° or 90°
Rotating angle
programmable
Viewing
45° monocular
Supply Cabinet Dimensions housing
600 x 660 x 950 mm (w x h x d)
Laser unit QFS 50
19" rack-mount, 6 HU
User interfaces laser unit
RS 232 / digital / TCP / IP / Profibus
Motor control unit
19" rack-mount, 3 U
User interfaces driver unit
digital / RS 232 (for configuration)
Total weight
approx. 90 kg (Cabinet), 21 kg (19" Rack)
Protection rating
IP54
Switzerland ROFIN-LASAG AG C.F.L. Lohnerstrasse 24 3645 Gwatt (Thun) Switzerland Phone: +41 33 227 45 45 Fax: +41 33 227 45 73
[email protected] www.lasag.com Germany ROFIN-BAASEL Lasertech GmbH & Co.KG Petersbrunner Str. 1b 82319 Starnberg Germany Phone: +49 8151 776 0 Fax: +49 8151 776 4159
[email protected] USA ROFIN-LASAG Laser 1617 Barclay Boulevard Buffalo Grove, IL 60089 USA Phone: +1-847-483 6300 Fax: +1-847-483 6333
[email protected]
Options CCD camera, Profibus for motor driver unit
DANGER
± 0.5 mm
VISIBLE AND INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION
ND:YAG
CE compliant, FDA compliant
ilagen, bt jederfen sie en mit-
Folie:
weiss, permanent
Druck:
2-farbig, rot/schwarz
Schrift:
Helvetica
wird verwendet für 86.0601 02 07.indd
W Average 1064/532 nm
630 - 640 nm
Max. 1 W
CLASS IV
LASER PRODUCT
74 mm
Compliance with standards
Specifications subject to change without notice
J ms
PILOT LASER 63.6663
55 mm
über 1000 mm bis 2000 mm
customer supplied
± 0.3 mm
20 - 90% (non condensing)
PC for configuration
± 0.2 mm
10 - 35 °C (full power)
Relative humidy max.
über 120 mm bis 315 mm
Ambient temperature max.
± 0.15 mm
air-cooled
über 30 mm bis 120 mm
approx. 900 W typ.
Cooling
± 0.1 mm
Power consumption, max.
bis 30 mm
100 - 230 V ± 10%, 50 - 60 Hz, 1P + E
Abweichnungen für Masse ohne Toleranzangaben
Supply voltage
über 315 mm bis 1000 mm
Installation and ambient conditions
