Transcript
nEt r w_
rlE:
tr tb
Lathe System PD 4OO
Accuracy and versatility made in Europe.
Completewith changegearsto cut threads (in 19 steps from 0.2 to 3.0mm). Clearlypositionedand easy to change.
Main switch with auto-stad orotection and emergency off. RÖHM precisionfeed (O 100mm).
Powerful capacitor motor
550Woutputpower.
Quick-changetool post with 2 holders(with stop and heightadjustability).
{"-:
Lathe PD zlAOis the heart of a multifunctional and expandable system and is unequalled in its classl ldealfor straightand cross cuts, taper turning,internaland external thread cutting, slotting, etc. Useable on materialssuch as steel, non-ferrous metals, aluminium and alloys. Negligibletolerances even under heavy loads. The wide range of accessoriescomplements the lathe's functions.The bed is already equipped with a milled and taooed surfacefor securingmill/drillPF 400. Technical data: Distancebetween centres 400 mm and cross slide travel 85mm, overthe top slide is 116mm.Solid, ribbed bed is made from quality cast iron with ground and hardenedways. Oversizedspindle with 2 adiustabletaoer bearings.MK3 taper and 20.5mmbore. Run-out, without chuck, 5/1,000mm. lncludes the precision 3 jaw chuck, 100mm diameter.
Six spindle speeds are providedvia belt drive:stage 1: 80, 330, 1,400rpmand stage 2: 160, 660, 2,800rpm. Powerful. quiet motor with 550W power outout.All adiusting wheels fitted with scales that may be zeroed. One division= 0.05mm.The auto feed has speedsof 0.07or 0.14mm/ rev. An integratedgearbox for LH and RH threads, with change gears provides 19 metric pitches: 0.2 0.25- 0.3 - 0.35 - 0.4 - 0.45- 0.5 - 0 . 6 - o . 7 - o . 7 5- 0 . 8 - 0 . 9 - 1 . 0
DIN 8606.With gearbox.
Tool post Including two holders. Provides quick tool changes with easy height adjustment. NO 24 415
Individ ual q uick-ch an ge holder Fits the tool oost of PD 400. NO 24 416 A tool holder with two adjustable rnserfs ls included as standard. With rotating centre MK 2 and tailstockchuck.
Largealuminiumhandwheels and adjustablesteel scale 'l division= 0.05mm.
4 jaw chuck with independent jaws Used to mount irregularlyand asymmetrically shaped objects. Each jaw is adjusted individuallyand centeringis thus achievedmanually. Hardened,reversiblejaws. Chuck diameter100 mm. NO 24 410
Cross-braced cast iron bed, wide-leggedshape,and prism slides for aoron and tailstock.
4 jaw chuck, self-centering
Protected lead screw with 12 x 1.5 Acme thread.
Note: Lathe PD 400 is now also availablein CNC version with spindlesrunning in ball bearings, stepping motor; control unit and easy to use WINDOWS compatible software. A special brochure is available. Feel free to ask for a copy.
The jaws are not independentlyadjustable,i.e. they are self-centering.High accuracy.Chuck diameter100mm. NO 24 408
- 1 . 2 5- 1 . 5- 1 . 7 5- 2 . O- 2 . 5 - 3 . 0 m m .l m p e r i atlh r e a d so f 1 0 - 4 8 TPI are also possible. A rotating centre MK 2 and tailstock chuck of 10mm capacity. 812 taper, are included. Lead screwwith acmethread12x1.5, top slide52mm and adjustableto turn tapers, with graduations up to 45'. Tailstockwith MK 2,24mm diameterand 40mm travel (with graduations). Overallsize approx.900 x 400 x 300mm (L x W x H). Weightapprox.45k9. Uses cuüing tools 10 x 1Omm.
This accessory is used in the place of the standard chuck and mounts largerand asymmetrical workpieces.Diameterof 150mm,with 2 through T-slots,as well as mountingclamps.
NO 24 400
NO 24 412
Faceplate and clamps
Carefully thought-out accessories solvemilling
and turning problems,
Splash guard and chip collecting tray Made from 1,5mm steel plate, powder coated.A welded cover protectsthe motor. Mountingholesand raisedbaseto securethe latheare pre-drilled.Seepingthrough of coolantis impossible.Length800 x width 270 x height290mm. NO 24 402
Collet set For accurate use on round comoonents. One each2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0 - 10 - 12 and 14mm are included.Concentricaccuracy betterthan 0.002mm,much betterthan a chuck. One soft colletfor makinga custom sizeyourself. The includedcollet attachmentis mounted in the place of the headstock chuck. Suooliedin a wooden box. NO 24 419 complete
Fixed steady Used when turning long, slender work. Fitted directlyto the bed-waysand is used when the tailstocksupport is inadequate. Maximum@ S1mm. NO 24404
Travelling steady Fitted to the caniage of the lathe. Indispensable when turninglong,slenderpieces. MaximumO 50mm. NO 24 406
Millldrill PF 4'OO Kit also includesthe mountingflange and screws (the mountingsurfaceon the PD 400 is already machined).ldentical to the MICRO miller FF 400, except that no compound table is supplied.Instead,a work surfaceof steel (150x '110mm),with 3 milled T-slots for the standard T-nuts, is supplied. Two screws secure the work surfaceto the cross slide. NO 24 304 ,r$
Centre tuming accessory ldeal when turning with highestpossibleaccuracy. Supplied with 2 dead centres (MK2 and MK3), drive/face plate with 30mm bore as well as reducingbushes30/20mmand 30/1Smm.A threaded drive pin screws into the headstock flange and the drive plate. NO 24 414
,ir
Gear tooth chuck (lomm) with adaptor Industrial quality, however not as accurate as the collets. With 10mm adaotor which fits into the 1Ommcollet. Includesthe chuck kev.
,uororrok
MICRO miller for precision work to 0.O5mmaccuracy! Quiet, Iooking good and multifunctional.
MICRO miller FF &0
Powerful, quietcapacitormotor
*,';,1fiJ,;Hiff[l*i
,|
6 spindlespeedsfrom 1402,470rpmareachievedby means of a polv-V belt and
Headstockwith scale, tilts and locks in position.The lockablequill has a 30mm travel. Switch for CW or CCW rotation.
Quill accepts collets (one each of 6 - 8 -1 0 and 12mm are included).
Machined table (400x 125mm), with3 T-slots. Largehandwheelswith adjustablescales. 1 rev = 2.0mm, 1 coarsedivision= 0.1mm, 1 fine division= 0.02mm.
T
lmportant! Both the headstock and spindle can be locked in position when milling.
Clamps,cuttersand workpieceare not inctuded.
.'{, -4,
,z/1
'-'
;l/
The headstock swivels through 3@" indicated on a scale. The lockable quill has a travel of 30mm (viathe handleand scale)and the throat distanceis 100mm.Six spindle speeds of between 140 and 2,470rpm are achievedby means of pulleysand a poly-V belt. Cuttingtools are securedin the 6, 8, 10 and 12mm colletsprovided.The headstock height is adjusted via the handwheel and dial (1 rev = 2.Omm)The solid, milled compound table has 3 T-slotsfor the 8 standardT-nuts. Other technical data: '140, 220 -24OV,400W50/60H2.Spindlespeedsof 310,480,730,1,140and2,470rpm. Column 45 x 500mm and table 400 x 125mm.X and Y travel amount to 225 and 80mm respectively.Footprint size 370 x 350mm. Overall height approx. 600mm. Weight approx. 47k9. Completewith KT 400. NO 24 308 Five piece collet set for millers PF m and FF 4OO lncludes1 eachof diameter2.4 - 3.0 -3.2- 4.0 und 5.0mm,for millingcutters.Supplied in wooden box. NO 24252
Compound table KT &O As describedabove but excludingthe column and headstock.The 45mm bore also fits the precisiondrill stand BFB 2000. Weight23k9. NO 24 303
Fine feed for accurate adjustments Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm. NO 242il
Accessories,br'tsand cutters for milling,
Nearly all the componentsare supplied in sturdy wooden boxes. Universal
'**
dividing
table UT 40O
Facilitates the manufacture of odd-shaped objects. The table may be fixed horizontallyor vertically.Drivetakes place via the worm drive and in its 360" travel yields nearly all the divisionsbelow100.Suppliedwith 4 index plates'. 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives,ratchets,cams, etc. The faceplateis not included.The taoer is identicalto the head soindle of the lathe. Suppliedin woodenbox with slidinglid. NO 24 421
Toolholder for rotary tools. For use on lathe machines.
Die holder for round dies. threads MStoMlO .-) -\l l
.'--
-l.-) Made of steel 30 x 10 x 65mm. This holderallows mountingof our rotary tool LB/E or lB/E to the tool post of the lathefor grindingor polishingpurposes. MICROMOTcollar size A 20mm. Shaft 8 x 1Ommfor tool holdersof PD 400. NO 24 098
Lathe practice for model makers An interesting book by Tilman Wallroth,in which all impofiantlathe componentsand working stages are dealt with in a practicalmanner. Includedare many , easilyunderstood , examples,clear r and informative illustrationsand many tips for use. Highly scientificadvice was deliberatelyomitted. 230 pages, written without referenceto trademarks. Germanonly!
NO 24 999
',
'.]l' ,*'
,dt ii'
|t[=-
Precision V-blocks .'t'
^Ö. -,.t
r
I..'dil'LI -,
:l
.\
Sizes:M3-4-5-6-8-10. The straightshaftfits the holder@ lOmm when mountedin the tailstockof the PD 400. The holder is held bv hand while cuttingthe threads. Comes in a wooden box. NO 24 082
Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four differentdepths of prism incisionsV all at 90'. Size50 x 30 x 30mm. The solid clamp and knurled knob ensure superb securing of the workoiece. Suppliedin a woodenbox with slidinglid. NO 24 262 2 pieces
Radius cutting
Precision vise
attachment
For the lathe system PD /nO ls mountedon the crossslidein placeof the tool holder.Cuts convex and concave shapesto depth of 1.Ommin steelas well as in non-ferrousmetals and plastics. Radii or 3/4" spheres of diameter up to max. 32mm are possible.Comes with one finishingcutter8 x 8 x 80mm in a wooden box with slidinglid. NO 24 061
Milled in steel. May be used on its side and back. Jaw width of 60mm, clampingcapacity 42mm. Completewith securingboltsand packed in a woodenbox with slidinglid.
NO 24 255
Cutting tools of high quality cobatt HSS stee/, ground.
Cuttersof @2,3,4 and 5mm. Double fluted according to DIN 327. Made of HSS. Supplied in woodenbox with slidinglid.
Five pieceset 10x 10x 80mm. One each
roughingout, t pafting,finish-/ ing cut, left{
-. l'll
\
and right cutIef,
NO 24 610
I I
II i
a oo
v u:fr
a
II
*o
T
:
FF
i1
-[
x:r:
oo
Suppliedin wooden box with slidinglid. NO 24 550
Three piece thread cutting set 10x10x80mm One cutter for external thread (ground to 60', metric) one for internal thread,one generalcutting. Supolied in wooden box with slidinglid. NO 24 552
t
Milling cutter set (2 - Smm) Allcutters with6mmshaft.
I
I
ilHHI
Milling cutter set (6 - lomm) 4 cutters A 6,7,8 and10mm. Fourflutedesignaccording to tti DIN 844. Shafts 6.0 and I f,1 10.0mm respectively.lvtadefi f,i of HSS. ll ldl Supplied in woodenbox with il [!l UU sliding lid. NO 24 620 Three piece centre drill sef Made of HSS steel. DIN 333 (VpeA)60'. Complete setcentre drillswithsizesof 2.O- 2.5 and 3.1Smm. NO 24 630
I
HSSboring tool set,6prbces
1,, tr',
il[
Edge finder set
*iir
I
O
ä€
s I
Arbor (A) For HSS gear cutters. 16mm-fitting.
?T
B ^,i'r
NO 24 425
Cutter set with tungsten rnserts
o@ Threeholders (90mmlong) O for roughingout; @ for longitudinalwork; @ for 90mm boring, holesfrom 12mm. Standardtungsten inserts,55',plated (commercially availableversion). Threeadditionalinsertssecuringscrew and key TX8 are included. NO 24 556 10 x'10mm
I
Tungsten disposable tips For the holdersas describedabove. NO 24 557 Ten piece set.
if. "F3
One each cutter for 60 degree (metric)and 55 degree(whitworth)insidethreads,1.3mm - 2.65mmand 4mm. Shaft of @ 6mm. Length95mm. The cutters are held by a tool holderthat mountsto the tool post of the PD 400. Comes in a wooden box. NO 24 520
:C
r=:=-:t ,*
Used for fast and accurate location of starting point of workpieceswith respectto the machinespindleon millingmachines.Size 6xGx50mmand6x5x75mm. Neatlypacked in a wooden box. NO 24 4U
ü
D=:-
HSS gear cutters (B)
Step clamp set, milled steel
Module 0.5 16mm bore. NO 24 426 NO 24 427 NO 24 428 NO 24 429 NO 24 430 NO 24 4it1
Consists of 2 step blocks and 2 clamps, 2 nuts,2 T slot nuts (B = 7mm, E = 12mm,D = 4mm, C = 7.2mm). Secures objects to approx.35mm thick. Suopliedin wooden box with slidinglid.
x 40mm outside diameter. No 1 (12-13 teeth) No 2 (14-16 teeth) No 3 (17-20 teeth) No 4 (21-25 teeth) No 5 (26-34 teeth) No 6 (35-54 teeth)
Parting tool holder and tool Used in the PD 400 quick-change system. Used to part stock and cut slots.The 12 x 3 x 85mm HSS tool contains cobalt. I
pt
NO 24 417 Spare tool for parting tool holder As describedabove. NO 24 554
t
C
oI
oI
fi
-L--
II -
T ?
Il
r NO 24257
I
I
tr
?
ot o (t @ o (t) o E (L t\ (Y) ro o)
o z
The tried-and-tested PROXXONtathe PD 400is now also availabtein CNC version. Multi-purpose for individual parts and small series manufacture. Please ask for our special brochure and also visit our website www.proxxon.com for detailed information.
ä.
I
-
:{ ! }l0l{ I
PROXXONGmbH lm Spanischen18 - 24 D-54518Niersbach Tel.:+49 (0) 65 75 - 78-0 Fax: +49 (0) 65 75 - 78-105 e-mail:
[email protected] www.proxxon.com
il o
'= I
o
.9 '6 o
