Transcript
For all your LCD & Plasma Displays
LCD COLOUR MODULE Model No. LCD810LMod
Psi
8.0” TFT LCD Colour Module LED Back Light PAL & NTSC, 2 x Composite Video inputs. Aspect Ratio: 4:3. Brightness 330 cd/m2, Contrast Ratio: 500:1.
Library Picture. The LCD810LMod with 8.0” TFT active matrix technology offers a High Brightness Sharp picture. With a separate control PCB with I/R sensor the Universal opportunities, such as CCTV, In-vehicle and for Audio/Video presentations are endless. SPECIFICATIONS: hHigh resolution 480,000 pixels 800 x 600. Active Area:162x121.5 (WxH)mm. hVideo system PAL & NTSC Auto. OSD with full Icons. Standard Accessories h Brightness: 330 cd/m², Contrast Ratio: 500:1 None hViewing angle: L/R: 65°, U/D: 60°. Aspect Ratio: 4:3 h Controls: Down, Up, Menu, Power. hOSD Menu: Brightness, Contrast, Saturation, Hue, Input Source V1/V2, Reset, Exit. hPower Source: 12V DC, 350mA. 4.0Watts Approx. hDimensions: Panel: 183 x 141 x 5. PCB: 100 x 77 x 10 (WxHxD)mm hTemp: Operation: -20°C-+70°C Storage: -30°C - +80°C hFinished in Panel & PCB. Weight: 0.31Kgms Connections Main PCB: Video Input: W6 - SIL14 pin connector. Pin 1: V1 Ground, Pin 2: V1 Video input, Pin 6: V2 Ground, Pin7: V2 Video input. Power: W2 - SIL2 pin connector. Pin 1: +12volt DC supply. Pin 2: Negative supply. Control PCB: W7 Pin 1 Blue cable. (Do NOT Reverse cable). Connections Ctl PCB: 9 pin SIL: Purple wire next to LED. hPlease note: A degree of technical knowledge will be required to install this module. hAll information correct at time of going to press hDesign and specification are subject to change without prior notice. E&OE.
Product Shop International Ltd PO Box 5503, Newbury, Berkshire, RG14 6YP. UK e-mail:
[email protected] Website www.productshop.co.uk
Tel: +44 (0) 844 800 4433
Fax: +44 (0) 844 800 9876
Registered office: As above. Registered No. 3852764
VAT No. GB 727 0478 29
User Manual Model No: SR810L - 8.0" TFT LCD Colour Monitor Features :LED Back Light with Digital Interface. Resolution: 800 x 600 Brightness 330 cd/m2 Contrast 500:1 PAL & NTSC Auto select Composite Video inputs x 2 Easy mini Din connection 12 Volt operation. Box contents: Monitor Unit, Remote control, Stand, Mini Din Connecting Lead. Front Controls & Sensors :Down, Up, Menu, Power, “ON” LED indicator, Infra-Red sensor. Operation :- Front panel (1) POWER. Push the “Power” button to turn the unit ON, Push again to turn OFF. (2) MENU Push the MENU button to display the menu options. Then the UP or DOWN buttons to select the option. Options: Brightness, Contrast, Saturation, Hue, Source Input Video 1 or 2, Mode Select, Reset, Exit. (3) UP > Push the UP button to increase settings. (after pressing “MENU” button). (4) DOWN < Push the DOWN button to decrease settings. (after pressing “MENU” button). (5) ON LED When the indicator is lit the unit is ON. If unlit the monitor is OFF. (6) INFRA-RED SENSOR When using the Infra-Red remote control, point the control directly at the sensor to get the best operation. Operation :- Remote Control POWER: Push the “Power” button to turn the unit ON, Push again to turn OFF. UP >: Push the UP button to increase settings. (after pressing “MENU” button). DOWN <: Push the DOWN button to decrease settings. (after pressing “MENU” button). MENU: Push the MENU button to display the menu options. Then the UP or DOWN
buttons to select the option. Options: Brightness, Contrast, Saturation, Hue, Source Input Video 1 or 2, Mode Select, Reset, Exit. Video Select: Push the button to select Video 2, Push again to select Video 1. Toggle. Note: The Mirror, Dimmer or Mode buttons do not work on this model. Connections: (7) DC INPUT The unit operates on 12volts DC power. It can be connected to any 12volt DC Power source (12VDC) such as an AC/DC Adapter , DC Battery, Car Battery, and Power supply. Red wire 12 volts +ve, Black wire to Negative –VE. WARNING NOTE: Ensure you do NOT exceed 12volts and have the polarity correct as you could damage the unit, which would not be covered by the warranty. (8) VIDEO INPUT 1 & 2 These inputs are for Composite video only. They can be connected to a video source, such as Video player, VCD player, DVD player, CCD Camera or Video games with Composite Video outputs. SPECIFICATIONS: High resolution: 480000 pixels 800 x 600. Area:162x122 (WxH) mm Video system: PAL and NTSC Auto. Aspect Ratio: 4:3 OSD (On Screen Display) with full Icons. 2 x Composite Video inputs. V1 & V2. Brightness: 330 cd/m² Contrast Ratio: 500:1 Controls: Down, Up, Menu, Power. With “ON” LED indicator. Menu: Brightness, Contrast, Saturation, Hue, Input Source V1/V2, Reset, Exit. Power Source: 12V DC +/- 10%, 350mA. 4.2 Watts Approx. Dimensions: 195 x 162 x 30 (WxHxD)mm Temp: Operation: -20°C - +70°C Storage: -30°C - +80°C. Viewing angle: L/R: 65°, U/D: 60°. Finished in Black. Weight: 623gms Connections: Input/Ouput: via 8 pin Mini din connection. Video input 1 & 2: Phono sockets. Power: Open wires, Red +ve, Black –Ve or 2.1mm DC socket if fitted.
