Transcript
LD-3060
OmniDeck
– 3000 Series
TM
• ADA Compliant • 2 Station Deck with Integral Bowls • Contoured Front Apron and Coved Backsplash • 9 Standard Configurations with Optional Extended Decks and Waste Receptacle Openings • Bowls and Deck are Constructed of Vandal Resistant Terreon® or Terreon®RE Solid Surface Material • Available in 32 Colors • Optional Faucets, Soap Dispenser and Trap Cover
Model No. LD-3060-2
Deck Width 60"
Bowl Size 16" x 13" x 5¾"
Description of Standard Equipment Two Station Terreon OmniDeck with integral bowls, contoured deck, 3" backsplash and 3" front apron. Includes mounting brackets, combined waste and single P-Trap.
Standard Selections
All OmniDecks are non-cancelable and non-returnable. Extended Deck (check all that apply) Standard ¨ STD
LD-3060-2 (Standard)
¨ XDL
Extended Deck Left
LD-3060-2 XDL
¨ XDR
Extended Deck Right
LD-3060-2 XDR
IN
Mounting The LD-3060 Terreon and TerreonRE OmniDecks can be installed using heavy gauge stainless steel mounting brackets (included), in-wall carriers or wall cleating. These mounting options eliminate the need for casework beneath the deck.
Model
D
Counter Top/Bowl Constructed of Terreon, a densified solid surface material composed of polyester resin, or TerreonRE, a densified solid surface material composed of a bio-based resin and preconsumer recycled granules. Terreon and TerreonRE are resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives. Terreon and TerreonRE are certified by NAHB to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-1. Terreon and TerreonRE are GREENGUARD® certified as low-emitting materials.
LD-3060-2XDLW/XDRW shown with Backsplash & Optional Waste Receptacles, Trap Cover, Bradley Faucet & Soap Dispenser
U E
Construction
Code Compliance and Certifications
N T
ANSI Standards: Terreon and TerreonRE are NAHB certified to meet ANSI Z124.3, Z124.6 and ANSI/ ICPA SS-1.
O
cUPC Approval: Terreon OmniDecks are Uniform Plumbing Code (UPC), International Plumbing Code (IPC) and National Plumbing Code of Canada (NPC) approved through the International Association of Plumbing and Mechanical Officials (IAPMO). Manufactured in compliance with IGC 156, CSA B45 Series (R08) & ASME A112.18.1/CSA B125.1.
C
This plumbing fixture is designed for hand washing only. It is not Intended to
¨ XDLW Extended Deck Left Waste Receptacle Opening ¨ XDRW Extended Deck Right Waste Receptacle Opening
LD-3060-2 XDL/XDR LD-3060-2 XDLW LD-3060-2 XDRW
dispense water for human consumption through drinking or for preparation of food or beverages.
IS
LD-3060-2 XDLW/XDRW
Standard Height Mounting Terreon and TerreonRE OmniDecks mounted at standard height are designed to comply with all ADA guidelines on reaches and clearances. To comply with ADA, the rim height of the LD-3060 OmniDeck must be 34" max. above the finished floor. To be completely ADA compliant, the Terreon and TerreonRE OmniDecks must be equipped with ADA compliant faucets and optional OmniDeck trap cover.
LD-3060-2 XDL/XDRW
D PR O DU IFIE CT
RT
br c.o
4
940
rg
-2 30 1
Juvenile Height Mounting The LD-3060 OmniDeck mounted with counter surface no higher than 31" is compliant with Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities: Building Elements Designed for Children’s Use; Final Rule.
CE
D
LD-3060-2 XDR/XDLW
00
.na ww w
h
Standard Equipment See description of standard equipment and standard selections. Verify all rough-in dimensions prior to installation. Consult local and national codes. Conformity and compliance to local and national codes is the responsibility of the installer.
Plumbing Fixtures Document No. 1095
Page 1 of 4 This information is subject to change without notice. 2/9/2012
© 2012 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY (800.272.3539) Fax: 262.251.5817 bradleycorp.com
OmniDeck
TM
Standard Selections (Continued) ¨ 8" Set ¨ NFD
TC-Putty TC-Coal TC-Putty-V2
8" Centerset No Faucet Drilling
TC-Coal-V2
Soap Dispenser (select one) 16oz Plastic Globe 2-1/2" Spout ¨ 6324 16oz Stainless Steel Globe, 2-1/2" Spout ¨ 6324-67 32oz Plastic Globe, 2-1/2" Spout ¨ 6324-68 ¨ SDO Soap Drilling Only No Soap Dispenser ¨ NSD Sensor Operated Soap Dispenser** (Must order as separate line items) ¨ 6315 ¨ P19-232B 1000 Shot or 27oz. Lotion Soap with Moisturizer *** ¨ P19-232A 2000 Shot or 54oz. Lotion Soap with Moisturizer *** ¨ P19-231F AC Adapter - 6315
Coffee Bean Cornfield Blue Sky Hill Side Mountain Top
Vernatherm Thermostatic Mixing Assembly Includes (2) Stop, Strainer and Check Valves Single-Tempered Line
TL
The LD-3060 is a molded one piece design. Seaming or the joining of two or more units is not recommended.
D
Designer Colors (available at an additional charge) Arctic Chip COFFEE ARC-CHIP Summer Sage CORN S-SAGE Riverstone BLUESKY RIVER Mystic Moss HILLSIDE MYSTIC-M Stardust MOUNTAIN STAR-D
TMA
U E
Sandtrap White Sand London Gray Graphite Lannonstone Cobblestone Organic Taupe
Water Supply:
N T
SAND WHT-SAND LONDON GRAPH LANNON COBBLE O-TAUPE
WR-Putty WR-Coal KWC
Putty-Colored Contoured Trap Cover Coal-Colored Contoured Trap Cover Putty-Colored Trap Cover with Soap Access Opening (for use with 6315 Soap Dispenser) Coal-Colored Trap Cover with Soap Access Opening (for use with 6315 Soap Dispenser) 21-Gallon Capacity Waste Receptacle with Putty-Colored Retainer 21-Gallon Capacity Waste Receptacle with Coal-Colored Retainer Terreon® Kneewall Cap
IN
Color of Terreon® Deck (select one) Standard Colors Empire Gray E-GRAY Mesa Bone BONE Charcoal Gray CHAR Designer White DS-WHT Jade JADE Fiesta Fiesta Peppered White PEP-WHT
– 3000 Series
Optional Selections
(Must select one from each category) Faucet Drilling (select one) * Centershank ¨ Shank 4" Centerset ¨ 4" Set
LD-3060
Side Apron (select one) Left Side Apron ¨ LSA Right Side Apron ¨ RSA
London Gray Organic Taupe
C
Style of Edging (select one) Roundover ¨ RO Beveled ¨ BV
¨ LONDON ¨ O-TAUPE
IS
Terreon Bowl Color (select one) Same as Deck ¨ Same Designer White ¨ DS-WHT Mesa Bone ¨ BONE
O
TerreonRE Colors (available at an additional charge) BIRCH-BARK Birch Bark MAIZE Maize OCEAN-MIST Ocean Mist DUSK Dusk MOONDUST Moon Dust OLIVE Olive FERN Fern OAT Oat
Both Side Aprons No Side Aprons
Side Splash - Shipped loose (select one) Left Side Splash ¨ LSS ¨ BSS Right Side Splash ¨ RSS ¨ NSS
Both Side Splash No Side Splash
D
¨ BSA ¨ NSA
* For more information on faucets, valves, transformers, and cabinets, please refer to the Faucet Section of the Bradley Plumbing Fixtures Catalog or http://www.bradleycorp.com ** For more information on the sensor operated soap dispenser please refer to Document No. 8653 or http://www.bradleycorp.com *** Lotion soap with moisturizer sold in case quantity – 4 bottles per case. Verify all rough-in dimensions prior to installation. Consult local and national codes. Conformity and compliance to local and national codes is the responsibility of the installer.
Plumbing Fixtures Document No. 1095
Page 2 of 4 This information is subject to change without notice. 2/9/2012
All OmniDecks are non-cancelable and non-returnable because they are made to specification for each order. © 2012 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY (800.272.3539) Fax: 262.251.5817 bradleycorp.com
OmniDeck
TM
LD-3060
– 3000 Series
Dimensions (Shown with Optional Selections) Top View
30" (762mm)
30" (762mm) 7" (178mm)
30" (762mm) 7" (178 mm) 4" (102mm)
11½" (292mm)
9" (229mm)
12" (305mm)
9" (229mm)
8" (203mm)
22" (559mm) 24" (610mm)
8" (203mm) 15" (381mm)
D
60" (1524mm)
15" (381mm)
U E
7½' (2286mm)
IN
Front View
3" (76mm) 37" (940mm)
N T
3" (76mm)
IS
C
O
54" (1372mm)
Side View
D
8" (203mm) ADA
Optional Trap Cover with Soap Access Opening
34" (864mm) 31" (787mm) 29" (737mm) ADA
Plumbing Fixtures Document No. 1095
Page 3 of 4 This information is subject to change without notice. 2/9/2012
13½" (343mm)
© 2012 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY (800.272.3539) Fax: 262.251.5817 bradleycorp.com
OmniDeck
TM
LD-3060
– 3000 Series
Rough-Ins 25¼" (641mm)
25¼" (641mm) 18" (457mm) 14" (356mm) ³⁄₈" Wall Anchors Supplied by Installer (6) Places
9" (229mm)
9³⁄₈" (238mm)
3" (76mm)
1½" (38mm) NPT Hot/Cold Supply Stub Out 2" (51mm) from Wall (If Hot/Cold Supply Required)
1½" (38mm) NPT Drain Stub Out 2" (51mm) from Wall
1³⁄₈" (35mm)
D
32" (813mm)
U E
29" (737mm)
N T
IN
17" (432mm)
Centerline OmniDeck
19" (483mm) 18" (457mm)
Finished Floor
#10 Wall Anchors (Supplied by Installer) (Hot/Cold Supply Only)
O
½" (13mm) NPT Tempered Supply Stub Out 2" (51mm) from Wall (If Tempered Supply Required)
110V GFCI Electrical Outlet
¼" Wall Anchors (Supplied by Installer)
10" (254mm)
5¾" (146mm)
D
IS
C
Side Rough-In View
Side Wall Mounting Locations (If Required) 32" (813mm)
Back Wall
Finished Floor
Plumbing Fixtures Document No. 1095
Page 4 of 4 This information is subject to change without notice. 2/9/2012
© 2012 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 Phone: 800.BRADLEY (800.272.3539) Fax: 262.251.5817 bradleycorp.com
