Preview only show first 10 pages with watermark. For full document please download

Ldvycbl Installation Guide

   EMBED

Share

Transcript

LDVYCBL Installation Guide Once the location of vehicle J1962 OBDII connector is found, follow these instructions: 1. Verify that the engine ignition is OFF. 2. Unmount the vehicle existing J1962 OBDII diagnostic’s connector. 3. Mount the OBDII female connector on the LDVYCBL cable in place of the vehicle’s original connector. This will make it available for use by the OEM or other third party service providers. 4. Connect OBDII Male connector on LDVYCBL to vehicle existing female connector. 5. Start the vehicle 6. Connect LDVYCBL DB15 connector to Streamer module. 7. Secure Streamer and cables using tie-wraps www.bb-smartworx.com International Headquarters: 707 Dayton Road -PO Box 1040 - Ottawa, IL 61350 USA 815-433-5100 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 3315